How can we obtain and manipulate Laurent series for different annuli?

In summary, the conversation discusses the process of finding a Laurent series for a given function in a specified annulus. The process involves using geometric series and making substitutions to find the series for specific values of z. The final result is the sum of these series, which converges in the specified annulus. The conversation also mentions the standard procedure of multiplying a fraction by 1/z to find a series that converges for |z|>1.
  • #1
opticaltempest
135
0
I uploaded a scanned page from Schaum's Outline of Complex Variables. I have some questions on how they found the Laurent series in Example 27.

http://img19.imageshack.us/img19/7172/i0001.jpg

If the image doesn't load, go to - http://img19.imageshack.us/img19/7172/i0001.jpg"

In Example 27 part (b), they used the Laurent series they obtained from part (a) and subtracted this series from the Laurent series they obtained for |z|>3 to get a Laurent series that is valid for |z|>3.

It appears that they are making substitutions into the geometric series to find the power series for 1/(2*(z+1)) (that is convergent?) for |z|>1 and the power series for 1/(2*(z+1)) (that is convergent?) for |z|>3. However, I thought the geometric series did not converge for |z|>1. How can we do these substitutions and say that we have a convergent series for |z|>1 and |z|>3? In other words, how do we know that the series for |z|>1 and |z|>3 actually converge so that we can subtract them?
 
Last edited by a moderator:
Physics news on Phys.org
  • #2
Well maybe since 1/(1-z) converges for |z|>1, with z=1/z, we get |1/z|<1 which is equivalent to |z|>1.

Is multiplying the fraction by 1/z a standard procedure for finding the series that converges for |z|>1 ?
 
  • #3
The geometric series is [tex]\frac{1}{1-z} = \sum_{n=0}^\infty z^n[/tex] and converges for [tex]|z|<1[/tex]. It diverges for [tex]|z|>1[/tex].

If [tex]|z|>1[/tex], then [tex]|1/z|<1[/tex]. The way they get the series expansion in part (a) is:
[tex]\frac{1}{2(z+1)} = \frac{1}{2z} \cdot \frac{1}{1-\left(-\frac{1}{z} \right)} = \frac{1}{2z} \sum_{n=0}^\infty \left( -\frac{1}{z} \right)^n = \frac{1}{2z} \sum_{n=0}^\infty (-1)^n \frac{1}{z^n} = \sum_{n=0}^\infty (-1)^n \frac{1}{2z^{n+1}} = \frac{1}{2z} - \frac{1}{2z^2} + \frac{1}{2z^3} - \cdots [/tex]


Now in part (b), if [tex]|z|>3[/tex], then [tex]|1/z|<3[/tex], and thus [tex]|3/z|<1[/tex]. Then again using the geometric series:
[tex]\frac{1}{2(z+3)} = \frac{1}{2z}\cdot \frac{1}{1-\left( -\frac{3}{z} \right)} = \frac{1}{2z} \sum_{n=0}^\infty \left( -\frac{3}{z} \right)^n = \frac{1}{2z} \sum_{n=0}^\infty (-1)^n \frac{3^n}{z^n} = \sum_{n=0}^\infty (-1)^n \frac{3^n}{2z^{n+1}} = \frac{1}{2z} - \frac{3}{2z^2} + \frac{9}{2z^3} - \cdots [/tex]


For part (b), we need the Laurent expansion for the annulus [tex]3<|z|<\infty[/tex]. (Laurent expansions are always defined for an annulus.) Both of the series we have above converge for |z|>3. (The first converges for [tex]|z|>1[/tex], which means it converges for [tex]|z|>3[/tex].) Then we can just add the series terms together to get the final Laurent expansion in the annulus [tex]3<|z|<\infty[/tex].

Hope this helps!
 

1. What is a Laurent Series?

A Laurent Series is a mathematical representation of a complex function as a sum of infinitely many terms, including both positive and negative powers of the variable. It is used to expand a function in a region where it may not be defined as a Taylor Series.

2. When do we need to use a Laurent Series?

A Laurent Series is used when the function in question has a singularity or pole within the region of interest. It helps to better understand the behavior of the function near these points and can provide more accurate approximations.

3. How is a Laurent Series different from a Taylor Series?

A Taylor Series only includes positive powers of the variable, while a Laurent Series includes both positive and negative powers. This means that Laurent Series can be used to approximate functions with singularities, while Taylor Series cannot.

4. How do I find the coefficients in a Laurent Series?

The coefficients in a Laurent Series can be found by using the formula cn = (1/2πi) ∫γ f(z) (z-a)-n-1 dz, where γ is a closed contour within the region of interest and a is the center of the series.

5. Can a Laurent Series be used for any function?

No, a Laurent Series can only be used for analytic functions, which means they are differentiable throughout their domain. Non-analytic functions, such as those with discontinuities or singularities, cannot be represented by a Laurent Series.

Similar threads

  • Calculus and Beyond Homework Help
Replies
1
Views
253
  • Calculus and Beyond Homework Help
Replies
3
Views
1K
  • Calculus and Beyond Homework Help
Replies
10
Views
1K
  • Topology and Analysis
Replies
9
Views
2K
  • Calculus and Beyond Homework Help
Replies
3
Views
6K
  • Calculus and Beyond Homework Help
Replies
1
Views
2K
  • Calculus and Beyond Homework Help
Replies
1
Views
2K
  • Calculus and Beyond Homework Help
Replies
15
Views
3K
  • Calculus and Beyond Homework Help
Replies
2
Views
2K
  • Calculus and Beyond Homework Help
Replies
2
Views
1K
Back
Top