Why we can see light and not heat?

  • Thread starter Physicsissuef
  • Start date
  • Tags
    Heat Light
In summary, the reason we can see light and not heat is because the photo receptors in our eyes are only sensitive to a certain range of wavelengths, and thermal radiation has a wavelength that falls outside of this range. Some animals can see heat, but for humans, the visible light spectrum is limited to certain wavelengths. Heat cannot be reflected in the traditional sense, but it is the transfer of energy from a hotter object to a cooler one. As for the state of steel at high temperatures, the flame increases its internal energy and when removed, the steel begins to radiate heat to its surroundings, causing its temperature to decrease. It is important to use the correct terminology when discussing these concepts, such as distinguishing between thermal energy and heat.
  • #1
Physicsissuef
908
0
Why we can see light and we can not see heat? Why can't heat be reflected?
 
Science news on Phys.org
  • #2
Physicsissuef said:
Why we can see light and we can not see heat?
By heat I assume you mean thermal radiation. If this is the case then the reason is that the photo receptors in our eyes are only sensitive to wavelengths between roughly 400nm to 700nm and thermal radiation has a wavelength greater than 700nm.
Physicsissuef said:
Why can't heat be reflected?
What makes you think it can't?
 
  • #3
Physicsissuef said:
Why we can see light and we can not see heat? Why can't heat be reflected?

Some animals can see heat (either infrared or ultra-violet). It's just the way our eyes are made, what we CAN see we call it visible light... I don't think there's any more to it than that. If we could see infrared we wouldn't think it at all special, we'd just see an extra colour. Just like some electronic cameras easily detect infra-red, at no extra cost.
 
  • #4
YellowTaxi said:
Some animals can see heat (either infrared or ultra-violet).
UV Heat? :confused:
 
  • #5
YellowTaxi said:
Just like some electronic cameras easily detect infra-red, at no extra cost.
This caused a bit of a hullaballo a few years back when people realized their HandyCams were recording the naughty bits of their loved ones right through their clothes. Manufacturers hastily installed filters in their cams to prevent this. But the filters can be removed...
 
  • #6
We don't really see either, but rather the effects of them. What is called light, is the effect of a quantity of electromagnetic energy (photon).
Heat is a measure of energy content, that can be felt, or observed. As an example ( a section of steel is going to be cut, or tempered, with the addition of heat it goes thru visible changes, dull red- cherry red- orange- yellow- white, these colors are very dependable indicators of the temperature of the steel being heated) we see the "effect" of heat.
 
  • #7
RonL said:
Heat is a measure of energy content, that can be felt, or observed...
Just to make one thing clear, heat is not temperature nor is it energy. Heat is the transfer of energy from a higher temperature to lower temperature, something cannot have "heat", and to say that something "has heat" is non-nonsensical. One can think of heat as the microscopic analogy of work.
 
  • #8
Physicsissuef said:
Why can't heat be reflected?

If you have a space heater, look at the shiny surface behind the heating element. It's there to reflect the heat.
 
  • #9
Hootenanny said:
Just to make one thing clear, heat is not temperature nor is it energy. Heat is the transfer of energy from a higher temperature to lower temperature, something cannot have "heat", and to say that something "has heat" is non-nonsensical. One can think of heat as the microscopic analogy of work.

I'm confused:confused: If at 1200 degrees, i remove the flame used to bring the temperature up, how do you describe the state of the steel until it cools to room temperature ?
 
  • #10
RonL said:
I'm confused:confused: If at 1200 degrees, i remove the flame used to bring the temperature up, how do you describe the state of the steel until it cools to room temperature ?
First, the flame increases the internal energy of the steal, by transferring energy to the steel, this energy transfer is called heat as opposed to work which would be done if the steel bar were compressed. When the flame is removed, the steel bar begins to radiate energy to it's surroundings and it's temperature decreases. This thermal radiation is known as heat.

As I said previously, something does not have heat, but the energy transferred down a temperature gradient is defined as heat. In the macroscopic analogy of work, something cannot have work, but is can transfer energy by doing work.

Further reading:
https://www.physicsforums.com/showthread.php?t=169821 - an earlier thread discussing the differences between thermal energy and heat.
http://hyperphysics.phy-astr.gsu.edu/Hbase/thermo/temper2.html
http://hyperphysics.phy-astr.gsu.edu/hbase/thermo/inteng.html
 
  • #11
Thanks Hootenanny
Knowing something, and using the proper words, or definitions to describe what is known, is so important. Lots of study for me. Maybe the next six years will produce a marked improvment in my post. Hope were all still around that long.

Thanks for the links.

Ron
 

1. Why can we see light but not heat?

Light and heat are both forms of energy, but they differ in the way they interact with matter. Light is a type of electromagnetic radiation that can be detected by our eyes, while heat is the transfer of thermal energy between objects. Our eyes have specialized cells called rods and cones that are sensitive to light, allowing us to see it. However, we do not have cells that can detect heat in the same way.

2. How does light interact with matter?

Light can interact with matter in several ways, including reflection, absorption, and transmission. When light hits an object, it can either bounce off (reflection), be absorbed by the object, or pass through it (transmission). The color of an object is determined by which wavelengths of light it reflects or absorbs.

3. Why do some objects give off heat but not light?

All objects with a temperature above absolute zero give off heat in the form of thermal radiation. However, not all objects emit light. The amount of light an object emits depends on its temperature and the type of material it is made of. For example, a piece of metal may feel hot to the touch but not emit light, while a flame is both hot and produces light.

4. Is light always accompanied by heat?

No, light and heat are not always present together. For example, a laser beam can be hot enough to burn through metal, but it does not give off heat in the traditional sense. This is because the energy of the laser is focused in a small, concentrated area, rather than being dispersed as heat.

5. How does the speed of light compare to the speed of heat?

The speed of light is much faster than the speed of heat. Light travels at approximately 299,792,458 meters per second, while heat travels at a much slower pace. In fact, the speed of heat can vary depending on the material it is traveling through, while the speed of light is constant in a vacuum.

Similar threads

Replies
3
Views
527
  • Thermodynamics
Replies
3
Views
876
  • Thermodynamics
Replies
15
Views
1K
Replies
2
Views
458
Replies
27
Views
416
Replies
14
Views
1K
  • Thermodynamics
Replies
28
Views
1K
Replies
1
Views
757
Replies
9
Views
719
Replies
7
Views
199
Back
Top