Register to reply

Amount of Propane Required to Melt 1L Aluminum

Share this thread:
Voltux
#1
Dec31-12, 09:31 AM
P: 13
I started off yesterday learning about specific heats, and measuring my ice cubes to figure out the correct number to cool my tea to a proper drinking temperature.

Now today I was curious how much propane would be required to melt 1L of Aluminum since I'm also interested in casting Aluminum. I was hoping that someone could check my work, and then tell me how I can get more "Real world" results, or if this would even be practical at all for my level of math/physics/chem understanding.

Also, if you have any concepts you think I should learn next I would appreciate any suggestions. I have some Physics, and Chemistry books that I am reading for furthering my education.

Aluminum
Latent Heat of Fusion: 398 J/g
Specific Heat: 0.91 J/gC
Density: 2.70 g/cm^3
Melting Point: 660.32C
Ambient Temperature: 20C

Mass of 1 Liter Aluminum (Mass = Density * Volume) (1mL = 1cm^3)
2.70g/cm^3 * 1000mL = 2700g

Required Energy for +640.32C (Mass * Specific Heat * Temperature Difference)
2700 * 0.91 * (660.32-20)
2700 * 0.91 * 640.32
2457 * 640.32 = 1,573,266.24

1,573,266.24 J Required to Heat 20C Aluminum to 660.32C

Required Energy to Change Solid -> Liquid (Mass * Latent Heat of Fusion)
2700 * 398 = 1,074,600 J

Total Energy to Heat, and Melt Aluminum (Raise Temp + State Change)
1,573,266.23 + 1,074,600 = 2,647,866.23 J

2,647,866.23 J
735.5184 Wh (Joules/3600)
2509.6929443 BTU (Joules/1055.05585262)

Propane
Molar Mass: 44.1g/mol
Energy Density: 2220kJ/mol
Liquid Density at 25C: 0.493g/cm^3
Mass Per Liter: 493g/Liter

Moles Per Liter (Mass Per Liter/Molar Mass)
493/44.1 = 11.17913832mols

Energy Density per Liter (Mol * Energy Density)
11.17913832 * 2,220,000 = 24817687.0704J

Amount of Aluminum Melted per Liter of Propane (Energy per Liter Propane/Energy to Melt Aluminum)
24817687.0704/2,647,866.23 = 9.3727118044L Melted per Liter of Propane
Phys.Org News Partner Physics news on Phys.org
An interesting glimpse into how future state-of-the-art electronics might work
What is Nothing?
How computing is transforming materials science research
Vanadium 50
#2
Dec31-12, 10:04 AM
Mentor
Vanadium 50's Avatar
P: 16,321
The first thing you could do to get more "real world" results is to use significant figures. 24817687.0704? Good heavens!
mfb
#3
Dec31-12, 10:06 AM
Mentor
P: 11,837
Well, in real setups, you don't get 100% efficiency. You will heat a lot of air and other parts of your experiment as well. The efficiency really depends on the setup.

Working with units everywhere and with less insignificant figures would be useful.

Catria
#4
Dec31-12, 10:56 AM
P: 56
Amount of Propane Required to Melt 1L Aluminum

9.372L of aluminum melted using just 1L of propane? Holy moly... Doing it for real will likely result in maybe 20-25% efficiency; you'd be lucky to be able to melt 3L with that much propane for real.


Register to reply

Related Discussions
How much power is needed to melt aluminum using induction heating? Electrical Engineering 7
How many appliances will melt aluminum wire?! Introductory Physics Homework 4
Heat required to melt an iceberg Introductory Physics Homework 3
How to figure out the amount of heat (joules) needed to melt 1g of ice? Introductory Physics Homework 5
Amount of ATP required in photosynthesis. Biology 10