Are Electronic Braking Systems the Future of Automotive Safety?

In summary, electronic braking systems are used in hybrid and electric vehicles to avoid contact between the user's foot and the final out come. They are also used in stability systems to brake individual wheels.
  • #1
22ashc
2
1
Hi there,

I'm currently researching for a Product Design project and was wondering if anyone had any insights into electronic braking systems.

Are there any current systems being used on general automotive vehicles at moment?

E.g

The brake pedal represents the pressure of braking and sends information to the ECU for example that the braking forces are electronically applied. So that there is no mechanical contact between the user's foot and the final out come.

Thanks
 
Engineering news on Phys.org
  • #2
22ashc said:
Hi there,

I'm currently researching for a Product Design project and was wondering if anyone had any insights into electronic braking systems.

Are there any current systems being used on general automotive vehicles at moment?

E.g

The brake pedal represents the pressure of braking and sends information to the ECU for example that the braking forces are electronically applied. So that there is no mechanical contact between the user's foot and the final out come.

Thanks

Welcome to the PF.

What has your research showed you so far? How does the regenerative braking of hybrid & electric vehicles work?
 
  • #3
Although not specifically what you're asking, researching electric trailer brakes may give you some information.
 
  • #4
22ashc said:
The brake pedal represents the pressure of braking and sends information to the ECU for example that the braking forces are electronically applied. So that there is no mechanical contact between the user's foot and the final out come.

I doubt that would ever pass safety checks, and don't see how it offers any benefit over a hydraulic system.
 
  • #5
In a way the ABS system has the ability to function in such a way. Utilizing stored pressure or/and an electric pump the system can apply brakes at any of the 4 wheels without the driver touching the pedal - slow a spinning wheel (TC) or pivot the car to keep it from spinning (ESC). Full electric calipers have been designed but to my knowledge have yet to be installed on a production vehicle, other than for parking brakes. I believe first you will see the system installed on the rear brakes only. Try a search for BWI.
 
  • #6
Electronic brake control has been used for a number of years in the E class Mercedes its called SBC sensortronic brake control.
 
  • #7
as russell said, MB E class had electronic brake system. It was problematic, and they later removed it.

I don't know about current cars, but lots of them has radar cruise control, and crash avoidance systems. all of them can brake without driver pushing the brake, so try looking into that.
and if i think about it, even cars with traditional "stupid" cruise control can apply brakes, with you just electronically setting the cruise control to lower speeds.
stability systems can brake individual wheels.

also, in top gear they had M3 with some smart electronic which could drive around their circuit without any input from driver. they claimed that the car was mechanically standard. just utilizing electronic steering assist, electronic throttle, (probably) electronic brakes and GPS.
 
  • #8
Escape Hybrids also use a brake by wire system.
 

1. What is an Electronic Braking System?

An Electronic Braking System (EBS) is a type of braking system that uses electronic sensors and controls to assist the driver in braking their vehicle. This system is commonly found in modern cars and trucks and is designed to improve safety and performance.

2. How does an Electronic Braking System work?

An EBS uses electronic sensors, such as wheel speed sensors, to monitor the rotational speed of each wheel. This information is then sent to an electronic control unit (ECU) which calculates the appropriate braking force needed for each wheel. The ECU then sends signals to the brake calipers, which apply the correct amount of pressure to each wheel to slow down or stop the vehicle.

3. What are the benefits of an Electronic Braking System?

One of the main benefits of an EBS is its ability to improve safety. By using electronic sensors and controls, the system can respond faster and more accurately than a traditional braking system, reducing the risk of accidents. EBS also allows for more precise control of braking force, resulting in more efficient and consistent braking performance.

4. Are there different types of Electronic Braking Systems?

Yes, there are several different types of EBS, including Anti-lock Braking Systems (ABS), Electronic Stability Control (ESC), and Brake-by-Wire systems. Each type of EBS has its own unique features and functions, but they all use electronic sensors and controls to assist with braking.

5. Can an Electronic Braking System fail or malfunction?

Like any electronic system, an EBS can fail or malfunction. However, most modern EBS are designed with redundant systems and fail-safe mechanisms to ensure that the brakes still function in the event of a failure. Regular maintenance and monitoring of the system can help prevent malfunctions and ensure the safety and reliability of the vehicle.

Similar threads

Replies
5
Views
2K
  • Engineering and Comp Sci Homework Help
Replies
7
Views
1K
  • Mechanical Engineering
Replies
1
Views
3K
Replies
8
Views
14K
  • Mechanical Engineering
Replies
5
Views
5K
Replies
1
Views
2K
Replies
1
Views
325
  • Mechanical Engineering
Replies
26
Views
2K
Replies
12
Views
5K
  • General Engineering
Replies
3
Views
10K
Back
Top