Kinetic friction in an accelerating Frame of Reference

In summary: Friction is a force that resists motion between two surfaces. If the object is already moving, friction can actually help slow it down and bring it to a stop. But if the object is at rest, friction can help it start moving.In summary, friction is a force that resists motion between two surfaces, but it can also cause acceleration in certain situations. In the example of a box on a flatbed truck accelerating to the right, the friction between the box and the truck's bed causes the box to accelerate to the left due to the inertial force. This is because the force of friction is in the opposite direction of the inertial force, causing a net acceleration. However, for an observer on the ground, the box appears to
  • #1
samirgaliz
29
0
Can the kinetic friction be in the direction of acceleration? I am thinking of the example of a box on a flatbed truck accelerating to the right from rest. The box accelerates to the left due to the inertial force as seen by an observer on the truck where the kinetic friction is opposite to the direction of this inertial force and assuming that the inertial force is greater than the kinetic friction.
My difficulty is trying to understand how would the kinetic friction be the cause of acceleration as seen by the ground? any clarification would be appreciated.
 
Physics news on Phys.org
  • #2
The best way to approach this would probably be to believe there is an answer, for a start. The secret would be to look at all the forces involved.
In this case, with no friction, the truck would accelerate more than with friction. ( The box would just be left behind and fall off.) When there is friction, the force on the truck from the box will oppose its acceleration. No violation of 'direction'. The box will accelerate, of course, because the force on it is in the appropriate direction.
 
  • #3
samirgaliz said:
My difficulty is trying to understand how would the kinetic friction be the cause of acceleration as seen by the ground? any clarification would be appreciated.
I suppose you mean here the acceleration of the box.
For the ground observer the box accelerates to the right, under the action of the friction force between the box and the truck's bed.
This acceleration is smaller than the acceleration of the truck itself so the box is left behind by the moving truck.
 
  • #4
Thank you sophiecentaur and nasu for the clarification.
 
  • #5
samirgaliz said:
My difficulty is trying to understand how would the kinetic friction be the cause of acceleration as seen by the ground? any clarification would be appreciated.
In many cases an object is acted on by three forces: gravity, the normal force, and friction. If the ground is level then the normal force cancels out gravity and the net force is equal to the friction force. In such cases the friction will always be the cause of the acceleration, and the friction force must be in the same direction as the acceleration.
 
  • #6
It is clear that friction is the cause of deceleration but in the above example it is causing acceleration and not deceleration as seen by an observer on the ground.
 
  • #7
Perhaps you could look at the Energy situation rather than getting distracted by the use of the words acceleration and deceleration. 'Deceleration' is no more than negative acceleration and both are due to forces. The actual direction of a force is not necessarily linked to the Energy transfer.

The friction between two surfaces will produce two equal and opposite forces. The force on the box is equal and opposite to the force on the truck. The box is being accelerated because a force acts on it and it gains kinetic energy. So friction is taking some energy from the truck and transferring it to the box - plus there is some heat as a consequence of the slipping over the truck floor. The total amount of KE after the event will be less than before - so your worry about the apparent paradox is groundless; friction causes loss of energy as usual. The details of forces and directions are, actually, not relevant.
 
  • #8
samirgaliz said:
It is clear that friction is the cause of deceleration but in the above example it is causing acceleration and not deceleration as seen by an observer on the ground.
There is nothing which prevents friction from causing acceleration. After all, that is how both cars and feet work.
 
  • #9
DaleSpam said:
There is nothing which prevents friction from causing acceleration. After all, that is how both cars and feet work.

That's really worth pointing out. Friction isn't always a bad thing.
 

1. What is kinetic friction in an accelerating frame of reference?

Kinetic friction is a type of force that occurs when two surfaces are in contact with each other and there is relative motion between them. In an accelerating frame of reference, this force arises due to the acceleration of the frame, which affects the relative motion between the surfaces.

2. How is kinetic friction different in an accelerating frame of reference compared to a stationary frame?

In a stationary frame, the only force acting on an object is the force of kinetic friction. However, in an accelerating frame, there are additional forces at play, such as the force of inertia and the force of acceleration. This results in a more complex relationship between the forces and the resulting motion.

3. How is the coefficient of kinetic friction affected in an accelerating frame of reference?

The coefficient of kinetic friction, which is a measure of the roughness between two surfaces, remains the same in an accelerating frame of reference. However, since there are additional forces at play, the net force and resulting motion may be different compared to a stationary frame.

4. What factors affect the magnitude of kinetic friction in an accelerating frame of reference?

The magnitude of kinetic friction in an accelerating frame of reference is affected by the coefficient of kinetic friction, the mass of the objects in contact, and the magnitude of the acceleration of the frame. Additionally, the angle between the surfaces and the direction of the acceleration also play a role.

5. How is the direction of kinetic friction in an accelerating frame of reference determined?

The direction of kinetic friction in an accelerating frame of reference is always opposite to the direction of motion of the object. This is because the force of kinetic friction always acts to oppose the relative motion between the surfaces, regardless of the frame of reference.

Similar threads

Replies
4
Views
1K
Replies
9
Views
1K
  • Mechanics
Replies
16
Views
959
Replies
6
Views
1K
Replies
5
Views
4K
Replies
37
Views
2K
Replies
15
Views
2K
Replies
5
Views
1K
Replies
22
Views
2K
Back
Top