Capacitor in Circuit: Charging Globe & Dimming Light

In summary: But when the capacitor reaches its maximum charge, the globe will get dimmer, because of the loss of current through the capacitor.
  • #1
forevermoreOC
15
0
Is it true that when a capacitor is connected in series with a globe, and is charged with a battery that while the charge on the capacitor is being increased, the globe will glow brightly. But when the capacitor reaches its maximum charge, the globe will get dimmer, because of the loss of current through the capacitor?
 
Physics news on Phys.org
  • #2
It starts off full brightness and starts dimming more and more as the charge is stored on the capacitor.
 
  • #3
But it starts dimming because of the loss in current, right?
 
  • #4
Right, the current drops as the charge is stored on the capacitor.
 
  • #5
thankyou whozum
 
  • #6
By the way, with a capacitor that is dishcharging in a similar circuit, what formula can you use to find the current through the globe after a certain time, and the charge that is on the capacitor after a certain time?
 
  • #7
Basically you have a series RC circuit (where R is the globe's resistance) using the discharge equation V = Vo e^-t/τ (where τ = RC)
and substituting q/C for V and qo/C for Vo where qo is the initial charge on the capacitor you get an equation of the same form q = qo e^-t/τ. Therefore the charge also decreases exponentially. By differentiating the previous equation w.r.t time (i = dq/dt) you get i = -qo/τ e^-t/τ same with the current! (- implies current decreases with time)
 
  • #8
Capacitors store charges.When connected in a circuit , it takes care of its own job irrespective of others do or not. So when you connect it with a battery , current starts flowing in the circuit , through the capacitor and the globe(which is a type of resistor in true sense) , so with time capacitor keeps on charging and the current keeps falling with time.As the current falls , the brightness in the globe keeps on lowering down , eventually leading to the dusk of the globe.

BJ
 

1. What is a capacitor?

A capacitor is an electronic component that is used to store energy in an electric field. It is made up of two conductive plates separated by an insulating material.

2. How does a capacitor charge?

A capacitor charges when it is connected to a power source. Electrons flow from the negative terminal of the power source to one plate of the capacitor, while an equal number of electrons flow from the other plate to the positive terminal of the power source. This creates an electric field between the plates and stores energy in the capacitor.

3. What is the purpose of a capacitor in a circuit?

A capacitor is used to store energy and release it when needed. It can also filter out unwanted signals in a circuit and help regulate voltage levels.

4. How does a capacitor cause a globe to light up?

When a capacitor is connected to a power source, it charges and stores energy in its electric field. When the capacitor is connected to a globe, it releases this stored energy, causing the globe to light up.

5. Why does a capacitor cause a light to dim?

As the capacitor charges, it blocks the flow of current in the circuit. This reduction in current causes the light to dim. When the capacitor is fully charged, it allows the current to flow normally, causing the light to become brighter again.

Similar threads

  • Introductory Physics Homework Help
Replies
20
Views
386
  • Introductory Physics Homework Help
Replies
9
Views
309
  • Introductory Physics Homework Help
Replies
6
Views
1K
  • Introductory Physics Homework Help
Replies
5
Views
204
  • Introductory Physics Homework Help
Replies
4
Views
765
  • Introductory Physics Homework Help
Replies
1
Views
952
  • Introductory Physics Homework Help
Replies
30
Views
1K
  • Introductory Physics Homework Help
Replies
3
Views
929
  • Introductory Physics Homework Help
Replies
4
Views
2K
  • Introductory Physics Homework Help
Replies
6
Views
2K
Back
Top