Register to reply 
Can this diagram make any sense? [counts of alpha decay] 
Share this thread: 
#1
Mar3114, 05:05 PM

P: 4

Hello all you physics folks,
this is my first post, so if I screw this up, go easy on me :) Here's the problem I'm working on and that I simply can't get my head wrapped around: I have a table of 10 values of counts per second (cps) of alpha decay of Americium241, depending on the pressure ##p## inside a chamber, where at a distance of ##x_0 = 6## cm a detector is mounted. I have to plot the cps...but not against the pressure, but a distance corresponding to that pressure at normal pressure levels (##p = 1 bar##). I am to use BoyleMarriots law $$ p \cdot V = p \cdot A \cdot x = const. $$ Since the crosssection of the chamber ##A## can be considered constant, we have $$ p \cdot x = const. $$ But this means that for decreasing pressure the distances get longer (that makes sense), but when I plot ##p_i## vs ##x_i##, I get an increasing cps count for longer distances, which is pretty much the opposite of what we'd want...any idea where I made a mistake here? Do I have to modify the cps counts in any way? EDIT: my bad, I wanted to post a screenshot of my current graph 


#2
Mar3114, 08:12 PM

P: 1,970

So what is the meaning of that x in the equation?
How do you change the pressure in the chamber? You have a piston that you move in the chamber? 


#3
Mar3114, 10:22 PM

P: 365




#4
Apr114, 03:19 AM

P: 1,481

Can this diagram make any sense? [counts of alpha decay]
let's see.
You have a chamber with a radioactive isotope, and a detector at a set distance. With increasing pressure in the chamber , you count the number of detections. I imagine that the number of detections should vary inversely with the pressure. Is that what happens? Then you want to plot the number of detections, versus an effective distance, with regards to pressure. Your problem is how to convert the pressure into an effective distance? Since, by increasing the pressure, the density of the gas also increases, and thereby the number of gas particles the radiation has a chance of encountering also increase. Would not the effective distance would then just be Px/Po times Xo, where Po and Xo are the base values at 1 bar, and Px is the values of the prescribed pressure readings. Or have I interpreted the experiment incorrectly. 


#5
Apr114, 06:49 AM

P: 4

So after a short distance nearly all alpha particles are absorbed or stopped by air molecules, and then the counts are pretty much 0 for higher distances. 


#6
Apr214, 02:20 AM

P: 1,481

Excellent.



Register to reply 
Related Discussions  
Alpha Decay  Introductory Physics Homework  6  
Kinetic energy of daughter nucleus and alpha particle from alpha decay  Introductory Physics Homework  1  
Original activity from total counts, short decay  Introductory Physics Homework  1  
Alpha decay  Advanced Physics Homework  1  
Alpha Decay  Advanced Physics Homework  0 