
#1
Feb2712, 03:42 AM

P: 123

Hi guys I am learning about electrostatic on my own and was solving some problems but I am having problems with these questions please help.
An electron is released within a uniform electric field of a magnitude of 28,000 N/C generated by two parallel plates. The plates are separated by 4 cm. If the electron has moved across the entire gap between the plates, what is its speed? We can get the force of the Particale in such electric field which will be F = 28 * 10^3 *  1.6 * 10^19; F = 4.48 * 10^15; We know here it will follow a parabolic path so I have stopped from here I don't know where to start to solve this problem. How much work is required to bring a 10.0 μC charge from infinity to 5.00 meters away from a point charge of 2.00 μC? I solved this problem but can't find the answer on the given choices,since they don't provide answer here is how I tried to solve for it. I want to know if my answer is correct. I reasoned through this as follows I assumed the charge is already 10 charge is 5 meters away,since the potential from infinity is zero and this would approximate result. So I got the force that they were putting on each other distance 5 meters away as: F = 9 * 10^9 * 10 * 10^6 * 2 * 10^6 / 5^2 = 7.2 * 10^3; So work done should be w = 7.2 * 10^3 * 5 = 0.036J; W = 3.6 * 10^2 The answer exists in the multiple choice but I don't know if its correct please let me know if it is. An electron moves 0.10 m along the direction of an electric field of a magnitude of 3.0 N/C. What is the potential difference between the electron’s initial and final points? a. 4.8 x 10–20 V b. 1.6 x 10–20 J c. –4.8 x 10–20 J d. –1.6 x 10–20 J I don't know where to start to solve this problem. Thanks for help in advance. 



#2
Feb2712, 06:34 AM

HW Helper
P: 3,337





#3
Feb2712, 06:55 AM

HW Helper
P: 3,337





#4
Feb2712, 07:02 AM

HW Helper
P: 3,337

Electrical potential problems 



#5
Feb2712, 02:37 PM

P: 123

Sorry for replying late was sleeping.
I am sometimes confused by electric potential sometimes in question. I know its is the work done or potential energy of a particle at specific place,and electric potential is work done per charge. For problem 2 I just used that U = Ufinal  UInititial; and since UInitial is approaching zero,so I neglected that. For problem number 1 how could I think I solved it thanks for that hint BruceW I first we know since its conservative force then potential will transform to kinetic,so its potential is F * D,and also since we know its potential is positive coz it would want to go to the positive charge so we can change the sign in order to get the work done in order to put the electron in its current state. W = 4.48 * 10^15 * 4 = 1.792 * 10^14; 1/2mV^2 = 1.729 * 10^13; 1/2mV^2 = (4.48 * 10^15 * 4); V^2 = (2 * 1.792 * 10^14) / (9.1 * 10^31) ; V = 1.98 * 10^7; For problem 3 we know that V = kQ / d and we derived that from integration I saw lecture of walter lewin on that. We also know that U / q = V,so we can do the following > V = Vfinal  Vinitial , but I am still confused into how to think about this problem though I think I am over complicating it in my head.. 



#6
Feb2712, 09:31 PM

P: 123

Sorry had to bump this coz it was going to page 2.




#7
Feb2812, 11:02 AM

HW Helper
P: 3,337





#8
Feb2812, 05:24 PM

P: 123

I see since its constant electric field it should simplify to V = Ed; so we should have
The potential difference at point 0.1 to be E = 3 * 0.1 = 0.3V but the answer isn't in the questions it would be in the choice if they asked potential energy Difference then it would be 0.3 * 1.6 * 10^19 = 4.8 * 10^20 that would be electric potential energy between the two points not electric potential. Did I miss something here ? 



#9
Feb2812, 08:02 PM

HW Helper
P: 3,337

The question was "What is the potential difference between the electron’s initial and final points?" And you've hit the nail on the head, the electric potential difference is 0.3V, but it is not one of the multiplechoice answers. And you've noticed that the electric potential energy difference is the same as one of the possible answers (answer c).
This is a very important skill for exams  trying to interpret the question, even when the question is worded badly. I think this is one of those situations, where the question wants the electric potential energy difference, but they only wrote 'potential difference'. 



#10
Feb2912, 02:58 AM

P: 123

Yes I agree one should always find patterns if the answer isn't included in the question.
One's assumption based on the given data would be right if the logic is correct :D. Anyway thanks alot for the help. 


Register to reply 
Related Discussions  
Measuring Electrical Potential and Electrical Fields without a computer  Classical Physics  5  
Two electrical Problems I'm stuck on  Engineering, Comp Sci, & Technology Homework  2  
Distinction between potential energy and electrical potential  Introductory Physics Homework  0  
Electronics  Potential Difference & Electrical Potential  Introductory Physics Homework  3 