Register to reply 
Energy from fall object 
Share this thread: 
#1
Apr214, 07:49 AM

P: 3

Hi guys,
I have a question that has been intriguing me for some time. If i drop an object 100m at the speed of gravity (9.8), which has a mass of 1000kg  given the initial velocity of zero, i get the following results: velocity = 44.3 m/s Kinetic energy = 980000 Joules If my calculations are correct, would the object generate 435kw of energy given that it takes about 2.4 seconds to fall? Notwithstanding any loss of energy, can this motion energy be transformed into electrical energy via a turbine generator? Thanks. 


#2
Apr214, 08:06 AM

Emeritus
Sci Advisor
PF Gold
P: 29,238

I'm not exactly sure how you calculated the power, considering that the amount of KE during the fall isn't a constant (the velocity isn't a constant). Why can't you use calculate the gravitational potential energy?
Secondly, isn't this the concept being used at hydroelectric dam? A relatively constant amount of water from some height, possessing gravitational potential energy, is used to turn turbines to generate electricity. Water fall is a "falling object". Zz. 


#3
Apr214, 08:11 AM

Mentor
P: 11,780

If you drop one object every 10s, and it takes 0.5s to catch each one, you get a series of 470kw spikes, each 0.5s long, that average to 23.5kw over the entire 10s. If you want to get a steady 23.5kw, you need a way to store the energy and release it at the correct rate. [added: as ZapperZ notes, it's easier to get a steady rate of power production if you let the mass fall in a continuous stream (e.g. water in a hydroelectric dam) rather in 1000kg chunks.] 


#4
Apr214, 08:27 AM

P: 3

Energy from fall object
Thanks for the replies. Catching the object and slowing it down would apply if if the object would hit the turbine as in the hydroelectric system. But what if the object is connect to a rope which in turn spins the turbine as the object drops  hence the relevance of the time. Jtbell, would this effect the figures you provided?



#5
Apr214, 08:38 AM

P: 1,970

If it's attached to the rope and wheel the calculation of speed, acceleration and times is not valid anymore. There will be a force acting on the weight from the rope.
The overall energy is still the same if you neglect dissipation. Hydroelectric plants are still better than weights on ropes. You don't need to lift the water back on top. The sun does this for free. 


#6
Apr214, 08:57 AM

P: 3

Thanks Nasu. To answer zapper z, i arrived at the power via the following steps:
 velocity: v = √2gh = √2x9.8x100 = 44.27  Kinetic energy: KE = 1/2mv² = 1/2 x 1000 x 44.27² = 980000J  Power (w): P = E/t = w = J/s w = 980000 / 2.25 = 435555.5w (435.5KW) Are my calculations correct? Nasu, withstanding the rope and the wheel, is the object generating 435.5KW? 


#7
Apr214, 09:30 AM

Emeritus
Sci Advisor
PF Gold
P: 29,238

Be careful of plugging and chugging away without understanding what you are doing. This scheme that you are discussing doesn't work. The "work" done is only "instantaneous", not constant, and not as an average. Zz. 


#8
Apr214, 10:05 AM

Mentor
P: 11,780




#9
Apr214, 11:24 AM

Sci Advisor
Thanks
PF Gold
P: 12,171

If you are initially assuming that the system is 100% efficient (which you seem to be doing), then you do not need to calculate KE. The gravitational Potential Energy at the top per second (using the mass arriving per second and mgh) will be equal to the Power delivered at the bottom.
If you are 'lowering the object down' by braking, then, of course, you are losing energy and the calculations become harder. 


Register to reply 
Related Discussions  
Object in free fall  Introductory Physics Homework  5  
Time it takes object in space to fall to Earth's surfac net F on object = Fg of Earth  Introductory Physics Homework  11  
Free fall object  Introductory Physics Homework  10  
What speed will an object fall?  Classical Physics  5  
Fall of Object  Introductory Physics Homework  4 