Understanding Phase Differences in Sinusoidal Waveforms

  • Thread starter pyroknife
  • Start date
In summary, the conversation discusses the relationship between X and Y values in a sinusoidal function. The speaker is trying to determine the appropriate angle for X in order to have a phase difference of less than 180 degrees. They ultimately conclude that X should equal 20cos(t-180deg) to achieve a phase difference of 135 degrees and lead the normal sine wave Z by 90 degrees. They also mention that Y will lag behind X by 135 degrees.
  • #1
pyroknife
613
3
This is just an example
X=-20cos(t)
y=cos(t-45deg)

X has to be positive so X=-20cos(t±180deg)
I know you want the angle ^ to be the smallest magnitude, but for this case both would give you a magnitude of 180 deg.
So which one would you pick X=20cos(t-180deg) or X=20cos(t+180deg)?
This would change the answer of whether X or Y was leading.

Someone told me you should pick the angle that makes a phase difference that is <180deg.
So in this case it would be X=20cos(t-180deg) since that would give a phase difference of 135 degree compared to the 180+45=225deg phase difference if we picked the positive.

Is that right?
 
Last edited:
Physics news on Phys.org
  • #2
X=-20cos(t)
y=sin(t-45deg)

Z=Sin(t)
X=20cos(t)=20Sin(t+90deg)
Y=Sin(t-45deg)

X leading normal sine wave Z by 90 degree
Y lagging normal sine wave Z by 45 degree.

X leading Y by 135 degree.
http://img855.imageshack.us/img855/5074/leadlag.jpg
 
Last edited by a moderator:

1. What are leading and lagging voltages?

Leading and lagging voltages are two types of voltage relationships that occur in AC circuits. Leading voltage refers to a situation where the voltage reaches its peak before the corresponding current, while lagging voltage occurs when the voltage reaches its peak after the corresponding current.

2. What causes leading and lagging voltages?

Leading and lagging voltages are caused by the presence of inductive or capacitive elements in an AC circuit. Inductive elements, such as inductors, cause a voltage to lag behind the current, while capacitive elements, such as capacitors, cause a voltage to lead the current.

3. How do leading and lagging voltages affect power in a circuit?

Leading and lagging voltages can affect the power in a circuit by changing the phase angle between the voltage and current. In a circuit with leading voltage, the power will be leading, and in a circuit with lagging voltage, the power will be lagging. This can result in a decrease in the overall power factor of the circuit.

4. How can leading and lagging voltages be corrected?

Leading and lagging voltages can be corrected by using power factor correction techniques. This can involve adding reactive components, such as capacitors or inductors, to the circuit to compensate for the leading or lagging power. Another method is to use active power factor correction systems, which use electronic circuits to adjust the power factor in real-time.

5. What are the effects of unbalanced leading and lagging voltages?

Unbalanced leading and lagging voltages can lead to unequal distribution of power and current in a circuit, resulting in overheating and potential damage to components. This can also cause inaccuracies in measurements and affect the overall efficiency of the circuit. Therefore, it is important to address and correct any unbalanced leading and lagging voltages in a circuit.

Similar threads

  • Introductory Physics Homework Help
Replies
7
Views
2K
  • Introductory Physics Homework Help
Replies
29
Views
1K
  • Introductory Physics Homework Help
Replies
6
Views
4K
  • Introductory Physics Homework Help
Replies
5
Views
2K
  • Introductory Physics Homework Help
Replies
8
Views
2K
  • Introductory Physics Homework Help
Replies
5
Views
957
  • Introductory Physics Homework Help
Replies
1
Views
1K
Replies
8
Views
792
  • Introductory Physics Homework Help
Replies
2
Views
2K
  • Electrical Engineering
2
Replies
54
Views
5K
Back
Top