Find min. wave amplitude (A_min) for Ant on Tightrope: T_s, mu, lambda, g

  • Thread starter ussrasu
  • Start date
In summary, the minimum wave amplitude for the ant to become momentarily weightless as the wave passes underneath it is determined by setting the vertical acceleration of the rope equal to the magnitude of acceleration due to gravity, which is then solved for A and minimized. The equation for the sinusoidal wave is y(x,t)=Asin(wt), and after differentiating twice, the value of A can be determined based on the wavelength and the magnitude of tension and mass per unit length of the rope.
  • #1
ussrasu
36
0
A large ant is standing on the middle of a circus tightrope that is stretched with tension (T_s). The rope has mass per unit length (mu). Wanting to shake the ant off the rope, a tightrope walker moves her foot up and down near the end of the tightrope, generating a sinusoidal transverse wave of wavelength (lambda) and amplitude (A) . Assume that the magnitude of the acceleration due to gravity is (g).

What is the minimum wave amplitude (A_min) such that the ant will become momentarily weightless at some point as the wave passes underneath it? Assume that the mass of the ant is too small to have any effect on the wave propagation.
Express the minimum wave amplitude in terms of T_s, mu, lambda, and g.

How would i go about solving this question? i don't know where to begin? Any help would be much appreciated! :smile:
 
Physics news on Phys.org
  • #2
By "momentarily weightless", your teacher probably meant "the net acceleration will be momentarily 0". You know the shape of the traveling wave is sinusoidal. Can you write its general equation y(x,t)=...?

If you can, then you can differentiate that 2 times wrt time and that'll give you the vertical acceleration of the rope as a function of position and time. Set that acceleration equal to 'g', then solve for A and "minimize" it.
 
Last edited:
  • #3
Ok This has to be thought upon.

First ask yourself when will the ant feel weightless?...when going up with acceleration or going down with some acceleration.Solution lies in going down with acceleration because this acceleration of going down will oppose the g.

Therefore the ant should go down with acceleration "g" so that it ffels weightless"

Now suppose the sinusoidal wave created by the man by tapping his foot is given by:

[itex]y=Asinwt[/itex]

Now double differentiate it wrt t so that you get the acceleration at which the rope particles go up and down:

[itex]a=-Aw^2 sinwt[/itex]

Now we know a=g , for ant to feel weight less.

Therefore,

[itex]g=Aw^2sinwt[/itex]

Now for A to be minimum ,sinwt=1

Therefore you get

[itex]g=Aw^2[/itex]

Now for the value of "w" , we need the wavelength.

Now velocity of the sinusoidal wave is given by:

[itex]v= \sqrt \frac{T}{m} [/itex]

where m= mass per unit length

Now apply v=f (lamda)

Calculate frequency from above formula

Now w= 2(pie)f

Put the value in above equation to get the answer...easy isn't it?
 
  • #4
Yes, thanks a lot for the help Dr Brain :smile:
 
  • #5
What I find strange is that the velocity of the wave is unafected by the fact that the force of gravity acts on the rope. The equation of motion for an "element" of rope is affected, therefor the resulting wave equation should be affected... Unless we neglect the force of gravity because it's so small compared to the tension... which is probably what we do.
 
  • #6
PHP:
g/ (  (  (   (2pi)(sqrt(T_s/mu)   )   /   (lambda)    )^2 )

that is what i got for A min, would that be correct?
 

1. What is the purpose of finding the minimum wave amplitude for an ant on a tightrope?

The purpose of finding the minimum wave amplitude is to determine the minimum amount of disturbance or oscillation that the ant can withstand while maintaining balance on the tightrope. This information can be useful in understanding the ant's ability to adapt and survive in challenging environments.

2. How is the minimum wave amplitude (A_min) calculated for an ant on a tightrope?

The minimum wave amplitude is calculated using the formula A_min = (T_s^2 * mu * lambda * g) / (4 * pi^2), where T_s is the ant's reaction time, mu is the mass of the ant, lambda is the length of the tightrope, and g is the acceleration due to gravity.

3. What is the significance of the ant's reaction time (T_s) in determining the minimum wave amplitude?

The ant's reaction time is the time it takes for the ant to respond to a disturbance on the tightrope. A shorter reaction time means the ant can quickly adjust to the disturbance and maintain balance, resulting in a lower minimum wave amplitude. A longer reaction time may indicate a less adaptable ant that requires a larger minimum wave amplitude to remain balanced.

4. How does the mass of the ant (mu) affect the minimum wave amplitude?

The mass of the ant plays a role in determining the minimum wave amplitude as it affects the ant's ability to resist the forces acting on it while on the tightrope. A lighter ant may require a smaller minimum wave amplitude, while a heavier ant may need a larger minimum wave amplitude to maintain balance.

5. Can the minimum wave amplitude be used to predict the ant's behavior on the tightrope?

The minimum wave amplitude is a useful measure in understanding the ant's ability to maintain balance on the tightrope. However, other factors such as wind, temperature, and the ant's behavior may also impact its ability to stay on the tightrope. Therefore, the minimum wave amplitude should be considered alongside other variables when predicting the ant's behavior on the tightrope.

Similar threads

  • Introductory Physics Homework Help
Replies
3
Views
2K
  • Introductory Physics Homework Help
Replies
3
Views
12K
  • Introductory Physics Homework Help
Replies
3
Views
10K
  • Introductory Physics Homework Help
Replies
6
Views
9K
  • Introductory Physics Homework Help
Replies
3
Views
24K
Replies
8
Views
9K
  • Introductory Physics Homework Help
Replies
3
Views
2K
  • Introductory Physics Homework Help
Replies
2
Views
7K
  • Introductory Physics Homework Help
Replies
8
Views
2K
  • Introductory Physics Homework Help
Replies
2
Views
15K
Back
Top