What is Boundary conditions: Definition and 415 Discussions

In mathematics, in the field of differential equations, a boundary value problem is a differential equation together with a set of additional constraints, called the boundary conditions. A solution to a boundary value problem is a solution to the differential equation which also satisfies the boundary conditions.
Boundary value problems arise in several branches of physics as any physical differential equation will have them. Problems involving the wave equation, such as the determination of normal modes, are often stated as boundary value problems. A large class of important boundary value problems are the Sturm–Liouville problems. The analysis of these problems involves the eigenfunctions of a differential operator.
To be useful in applications, a boundary value problem should be well posed. This means that given the input to the problem there exists a unique solution, which depends continuously on the input. Much theoretical work in the field of partial differential equations is devoted to proving that boundary value problems arising from scientific and engineering applications are in fact well-posed.
Among the earliest boundary value problems to be studied is the Dirichlet problem, of finding the harmonic functions (solutions to Laplace's equation); the solution was given by the Dirichlet's principle.

View More On Wikipedia.org
Recent contents Top users
  1. M

    A Rigid body motion (RBM) transformation

    Above are pictures of a problem in mechanics. An elastic body occupying domain ##\Omega## is supported below with a fixed support and from above with a rigid body. The following calculations aim to express the movements of the points located at the interface ##\Gamma_F## between the rigid and...
  2. P

    I Lagrangian density of a linearly elastic string under gravity

    This was inspired by this:Dropping an extended Slinky -- Why does the bottom of the Slinky not fall?. There is that famous demonstration of dropping a slinky, and the bottom of the slinky does not move until the center of mass reaches the bottom. I was trying to figure out how hard are the...
  3. E

    A Why is "method of image current" valid in magnetostatics?

    Hi wise folks, I am working through Jackson problems, and have just encountered problem 5.17: It is pretty straightforward to show that the given image current distributions will satisfy the boundary conditions (both tangent and normal) at the ##z=0## plane. But my question is actually: "why...
  4. Jaime Rudas

    I The boundary conditions at infinity

    Section 5 (pg. 29) of the Michel Janssen's paper EINSTEIN’S QUEST FOR GENERAL RELATIVITY, 1907–1920(*) says: 1. From the above I understand that the application of general relativity to an infinite universe was considered problematic. 2. On the other hand, I understand that it is currently...
  5. H

    A Boundary conditions for variable length bar

    Suppose I'm looking at a bar of length L(t) in 1D and I have the conservation of mass: \frac{\partial\rho}{\partial t}+\frac{\partial}{\partial x}(\rho u)=0 In order to make things easier, I make the change of variable x'=x/L(t) so that in this frame of reference, the length remains constant...
  6. Fractal matter

    A Two degrees of freedom in GR after boundary conditions specified?

    I read there are 2 degrees of freedom in GR after boundary conditions specified. Does that mean 2 equations are enough for EFE equivalent? Those two seem like the amplitude and a phase.
  7. N

    Fortran Need help with Jacobi relaxation method for Dirichlet boundary conditions

    program r_jacobi implicit none !!!!Variables!!! real*8 V, V_1, V_2, Lx, Ly integer n ,i , j, k, nx, ny real*8, allocatable :: arrx(:), arry(:), phi(:,:,:) real*8 x, xi, xf, y, yi, yf, dx, dy real*8 d, q, bx, by V=1 V_1=V V_2=-V Lx = 2 Ly = 1 nx = 200 ny = nx/2...
  8. chwala

    A The boundary conditions in reference to Laplace's equation

    We have inhomogenous dirichlet boundary conditions (well understood)....the laplace equation is a steady state equation and we can clearly see that in 2D..it will be defined by 4 boundary conditions and NO initial condition...having said that; kindly have a look at the continuation below... I...
  9. B

    Checking assumptions in boundary conditions of double well system

    The idea here (as I'm told) is to use the boundary conditions to get a transcendental equation, and then that transcendental equation can be solved numerically. So I'm making a few assumptions in this problem: 1. The potential ##V(x)## is even, so the wavefunction ##\psi(x)## is either even or...
  10. chwala

    A Solve the heat equation having Dirichlet boundary conditions

    I am going through these notes...they are pretty easy to follow. I would like more insight on the initial condition. In this problem, (attachment below), i guess the choice of initial condition is convenient as its easier to plug in the values of ##n=2## and ##b=3## (highlighted on the...
  11. warhammer

    I Query on Electromagnetic Theory (Dielectric Boundary Conditions)

    The given question from Electromagnetic Theory (which is based on Dielectric Boundary Conditions) is as follows: Interface b/w two dielectric medium has a surface charge density (suppose xyz C / (m ^ 2) ). Using boundary condition find field in 1 (relative permittivity =xyz) if field in 2...
  12. A

    MATLAB No End" Boundary Conditions in Wave on a String

    How did they impose boundary conditions here if "no end" is selected? Here: https://phet.colorado.edu/sims/html/wave-on-a-string/latest/wave-on-a-string_en.html I would like to do the same thing without changing the wave equation of the string.
  13. A

    MATLAB Boundary conditions in the resolution of a PDE with the FFT method

    How to impose boundary conditions when solving a PDE with fft? For example here: If I copy this code I get periodic boundary conditions. Thank you
  14. L

    Engineering Hand tool boundary conditions - Forces determination

    Hello, I' m trying to make a linear static analysis (Finite Element Analysis) on the following hand tool. I want to determine the boundary conditions. In order to do that I have decided to use a force couple to represent the forces that a bolt exerts on the jaws of this spanner. Despite using...
  15. guyvsdcsniper

    Boundary Conditions for an infinite rectangular pipe

    Does setting up the problem symmetrically on this axis and the boundary conditions applied make sense? I don't believe I will have a problem solving for the potential inside, but i just want to make sure I have my B.C and axis correct before proceeding. EDIT: Or should this be a 2-D lapace...
  16. guyvsdcsniper

    Evaluating the boundary conditions for a rectangular pipe

    I have attached an image of the pipe in the attachmnts. The pipe is parallel to z-axis form (-∞,∞) and sides of length a. So my boundary conditions for this problem are as follows 1.) V=0 at y=0 2.)V=0 at y=a 4.)∂v/∂x=0 @ x=0 3.)V0 @ x=a I am a little confused on the fourth boundary...
  17. S

    Engineering Boundary Conditions Electrical Engineering

  18. H

    I Is the scalar magnetic Potential the sum of #V_{in}# and ##V_{out}##

    Hi, I'm wondering if I have an expression for the scalar magnetic potential (V_in) and (V_out) inside and outside a magnetic cylinder and the potential is continue everywhere, which mean ##V^1 - V^2 = 0## at the boundary. Does it means that ##V^1 - V^2 = V_{in} - V_{out} = 0## ?
  19. JD_PM

    Error when creating boundary conditions (OpenFOAM)

    Let's give some context. I created a Mesh via snappyHexMesh and next I am setting the boundary conditions (BCs). First I copied the patches folder "createPatchDict" to my system's folder via the command "cp $FOAM_ETC/caseDicts/mesh/manipulation/patches/createPatchDict ./system" Taking into...
  20. H

    Boundary conditions ##\vec{B}## and ##\vec{H}##

    When asking for boundary conditions I'm wondering if this is enough in this situation to give ##\vec{\nabla} \cdot \vec{B} = 0 , B_{2\perp} - B_{1 \perp} = 0## ##\vec{\nabla} \cdot \vec{H} = - \vec{\nabla} \cdot \vec{M}, H_{2\perp} - H_{1 \perp} = - (M_{2\perp} - M_{1 \perp})## ##\vec{\nabla}...
  21. H

    Boundary conditions (E and D) for a dielectric sphere

    Since there is no free charge ##\int_S \vec{D} \cdot d\vec{a} = 0## and ##\rho_f = 0## ##\sigma_f = 0## ##\vec{nabla} \cdot \vec{P} = 0## since P is a constant ##\rho_b = - \vec{nabla} \cdot \vec{P} = 0## For a simple surface we can find the boundary conditions for ##\vec{E}## using a Gauss'...
  22. C

    I Non-Homogeneous Robin Boundary conditions and Interpretations of Signs

    I have been solving the constant coefficient 1D advection-diffusion equation ##\frac{\partial c}{\partial t} + v\frac{\partial c}{\partial x} = D\frac{\partial^2 c}{\partial x^2}## on ##0<x<L,t>0## with a variety of robin BC's. Namely $$vc + D\frac{\partial c}{\partial x} = J^f ~~at~~ x=L $$...
  23. Stefan H

    A Solving Laplace's equation in polar coordinates for specific boundary conditions

    Hello everybody, Currently I am doing my master's thesis and I've encountered a physics problem which is very difficult for me to solve. The problem I have is finding equations for the magnetic scalar potential inside and outside a ferromagnetic wire for specific boundary conditions...
  24. chwala

    Confused About Boundary Conditions for ##y## and ##x##

    I am going through this notes, i can follow quite well...my only issue is on the highlighted part...i thought that we had two boundary conditions for ##y## ( of which one of them is non homogenous) and two boundary conditions for ##x##( of which both are homogenous)...kindly clarify on this part...
  25. C

    Boundary conditions in Ansys

    Hi, I have one question related to the boundary conditions I should apply in a Static Structural simulation for the following support. The support is subjected to the following loading conditions shown below...
  26. yucheng

    I Unraveling Laplace's Equation: Exploring Valid Domains and Boundary Conditions

    Hi! This thread might well be similar to: https://www.physicsforums.com/threads/thread-about-jacksons-classical-electrodynamics-3rd-edition.910410/ I'm self-studying Vanderlinde and having a great time. However, I think that I am conflating and confusing many different things. Let me just ask...
  27. R

    Boundary conditions for 2 ropes fixed to a massless ring with a damper

    Hi, I'm not quite sure if I'm correct. I need to find the boundary conditions for 2 ropes ##T_1 \mu_1, T_2 \mu_2## fixed at ##x=0## to a massless ring with a massless damper of force ##F_d - -bv_y## Here what I think, since the ring and the damper is massless ##\sum F_y = 0##. Thus, ##-T_1...
  28. N

    Periodic boundary conditions -> Shouldn't supports hinder all motion?

    Hello everyone, I am currently trying to understand periodic boundary conditions for the mechanical investigation of mechanical properties of a RVE. I found a good video explaining the theory behind it: But something is unclear to me: At the above linked time step, the individual conical...
  29. F

    Unusual boundary conditions in FEA software

    For a 2D problem with unknown displacements u(x,y) and v(x,y), is it allowed to give such a set of BCs u(0,y)=1 and vy(0,y)=0, the former being a displacement BC, the latter being a force BC (vy is the y strain)? How is this implemented in FEA software?
  30. B

    Set up boundary conditions for a simple elasticity problem

    [Mentor Note -- Thread moved to the ME forum to get better views] Let's consider an incompressible block of Neo-Hookean material. Let the initial reference geometry be described by ##B=[0,b] \times [0,b] \times [0,h]##. The professor gave me the following task: Of course there can be many...
  31. L

    A Ising model open chain and periodic boundary conditions

    One dimensional Ising model is often treated as open chain system with free ends. Then when external field is added it is treated with cyclic boundary condition. Can someone explain me are those methods equivalent, or not?
  32. docnet

    Solve this PDE with Neumann boundary conditions

    Hi all, I was hoping someone could check whether I computed part (4) correctly, where i find the solution u(t,x) using dAlembert's formula: $$\boxed{\tilde{u}(t,x)=\frac{1}{2}\Big[\tilde{g}(x+t)+\tilde{g}(x-t)\Big]+\frac{1}{2}\int^{x+t}_{x-t}\tilde{h}(y)dy}$$ Does the graph of the solution look...
  33. Hosein Javanmardi

    A Implementing FDM Boundary Conditions at a Red Point

    in Finite Difference Method (FDM), the boundary conditions can be implemented by applying the continuity of parallel component of magnetic field intensity. when it comes to the interface of two areas, it is done at ease, but consider this case at the red point: in FDM we exactly require on...
  34. chwala

    Solve PDE Uxx+Uyy=-2 with Boundary Conditions

    ial this is the question.
  35. G

    A Laplace eq. in cylindrical coordinates and boundary conditions

  36. Z

    Tackling Boundary Conditions in Python (Griffins Example)

    How to run a numerical simulation of Laplace equation if one of the boundary condition is like this: $$V(x,y) = 0 \text{ when } x \to \infty$$ I am trying to use Python to plot the solution of this Example 3.5. in Griffins EM
  37. Tony Hau

    Boundary conditions of linear materials

    The question is as follows: Solutions given only contain part a) to c), which is as follows: So I now try to attemp d), e) and f). d) The magnetic field of a uniformly magnetized sphere is: $$ \vec B =\frac{2}{3}\mu_{o} \vec M = \mu_{o}\vec H$$ $$\frac{2}{3}\vec M = \vec H$$ The perpendicular...
  38. LCSphysicist

    I Boundary conditions for TM and TE waves

    Theta in the incident angle Phi is the refraction angle '' denotes everything that propagates to the other medium, that is, everything related to refraction ' denotes the reflection in the original medium I am rather confused, would appreciate any help. I see the second equation of TE is...
  39. JD_PM

    I Assuming boundary conditions when integrating by parts

    Let's present two examples $$-\frac 1 2 \int d^3x'\big (-i \phi(x', t)\nabla^2\delta^3(x-x') \big )$$ Explicit evaluation of this integral yields $$-\frac 1 2 \int d^3x'\big (-i \phi( \vec x', t)\nabla'^2\delta^3(\vec x-\vec x') \big ) =\frac{i}{2}\phi(\vec x', t) \nabla' \delta^3(\vec...
  40. K

    Automotive Modal analysis - Input and boundary conditions given?

    My understanding in modal analysis is very limited. All I know is it helps to find a specific mode of vibration and the natural frequency corresponding to it. While I was discussing about this with my NVH team colleague, he told me that there is no force input or excitation input given to a...
  41. M

    I Vibrations of waves with pinned vs free boundary conditions

    Hi PF! Can someone explain to me why in math/physics the frequencies associated with waves (or say drum heads) tend to be larger when the boundaries are pinned as opposed to free? If possible, do you know any published literature on this? Thanks!
  42. Riccardo Marinelli

    A Boundary conditions of eigenfunctions with Yukawa potential

    Hello, I was going to solve numerically the eigenfunctions and eigenvalues problem of the schrödinger equation with Yukawa Potential. I thought that the Boundary condition of the eigenfunctions could be the same as in the case of Coulomb potential. Am I wrong? In that case, do you know some...
  43. E

    B Gradient of scalar field is zero everywhere given boundary conditions

    I'm struggling with a few steps of this argument. It's given that we have a surface ##S## bounding a volume ##V##, and a scalar field ##\phi## such that ##\nabla^2 \phi = 0## everywhere inside ##S##, and that ##\nabla \phi## is orthogonal to ##S## at all points on the surface. They say this is...
  44. R

    Engineering Relationship between the solution convergence and boundary conditions

    I create an algorithm that can solve [K]{u}={F} for atomic structure, but the results are not converge Do the boundary conditions affect the convergence of the resolution of a system of nonlinear partial equations? And how to know if the solution is diverged because of the boundary conditions...
  45. Leonardo Machado

    A Boundary conditions in the time evolution of Spectral Method in PDE

    Hi everyone! I am studying spectral methods to solve PDEs having in mind to solve a heat equation in 2D, but now i am struggling with the time evolution with boundary conditions even in 1D. For example, $$ u_t=k u_{xx}, $$ $$ u(t,-1)=\alpha, $$ $$ u(t,1)=\beta, $$ $$ u(0,x)=f(x), $$ $$...
  46. person123

    I Boundary Conditions For Modelling of a Fluid Using Euler's Equations

    Hi! I want to use Euler's equations to model a 2 dimensional, incompressible, non-viscous fluid under steady flow (essentially the simplest case I can think of). I'm trying to use the finite difference method and convert the differential equations into matrices to be solved using MATLAB. I set...
  47. S

    Heat Equation with Periodic Boundary Conditions

    I'm solving the heat equation on a ring of radius ##R##. The ring is parameterised by ##s##, the arc-length from the 3 o'clock position. Using separation of variables I have found the general solution to be: $$U(s,t) = S(s)T(t) = (A\cos(\lambda s)+B\sin(\lambda s))*\exp(-\lambda^2 kt)$$...
  48. dRic2

    I The density of states independent of Boundary Conditions

    Most undergrad textbook simply say that it is intuitive that boundary conditions should not play a role if the box is very large. Other textbooks suggest that this should be taken for granted since the number of particles at the surface are orders of magnitude smaller that the number of bulk...
  49. M_Abubakr

    RVE Periodic Boundary Conditions in ANSYS Workbench Modal Analysis

    Hi I have a project regarding micromechanics of composites. I'm starting my analysis on the Fiber Matrix RVE. Right now I'm trying to find the natural frequency of the unit cell. The Unit cell has some unique geometry which I will keep on changing to see how natural frequency changes. I have...
  50. U

    I Stratton-Chu solution, special case

    I will try to ask the question, saving as much calculations as possible, so as not to weigh down those who want to try to help me. Starting from the general electromagnetic problem in empty space, taken as a domain a volume V delimited by a closed surface S, Elliot (1) shows how the field (i.e...
Back
Top