What is Sensor: Definition and 401 Discussions

In the broadest definition, a sensor is a device, module, machine, or subsystem whose purpose is to detect events or changes in its environment and send the information to other electronics, frequently a computer processor. A sensor is always used with other electronics.
Sensors are used in everyday objects such as touch-sensitive elevator buttons (tactile sensor) and lamps which dim or brighten by touching the base, besides innumerable applications of which most people are never aware. With advances in micromachinery and easy-to-use microcontroller platforms, the uses of sensors have expanded beyond the traditional fields of temperature, pressure or flow measurement, for example into MARG sensors. Moreover, analog sensors such as potentiometers and force-sensing resistors are still widely used. Applications include manufacturing and machinery, airplanes and aerospace, cars, medicine, robotics and many other aspects of our day-to-day life. There are a wide range of other sensors, measuring chemical & physical properties of materials. A few examples include optical sensors for Refractive index measurement, vibrational sensors for fluid viscosity measurement and electro-chemical sensor for monitoring pH of fluids.
A sensor's sensitivity indicates how much the sensor's output changes when the input quantity being measured changes. For instance, if the mercury in a thermometer moves 1 cm when the temperature changes by 1 °C, the sensitivity is 1 cm/°C (it is basically the slope dy/dx assuming a linear characteristic). Some sensors can also affect what they measure; for instance, a room temperature thermometer inserted into a hot cup of liquid cools the liquid while the liquid heats the thermometer. Sensors are usually designed to have a small effect on what is measured; making the sensor smaller often improves this and may introduce other advantages.Technological progress allows more and more sensors to be manufactured on a microscopic scale as microsensors using MEMS technology. In most cases, a microsensor reaches a significantly faster measurement time and higher sensitivity compared with macroscopic approaches. Due to the increasing demand for rapid, affordable and reliable information in today's world, disposable sensors—low-cost and easy‐to‐use devices for short‐term monitoring or single‐shot measurements—have recently gained growing importance. Using this class of sensors, critical analytical information can be obtained by anyone, anywhere and at any time, without the need for recalibration and worrying about contamination.

View More On Wikipedia.org
  1. E

    Detection of ground level ozone with light

    Hi there, I'm working on a project where I'm trying create a sensor to measure the relatively lower concentrations of O3 at ground level. The main idea is to use the unique spectral characteristics of O3, shine a UVC light (at 254nm, where the absorption cross section is the highest) through...
  2. P

    I How non-conscious can an Observer be and cause wave function collapse?

    Please help me find websites describing easy to understand experiments discovering how little of a Conscious Observer is needed to cause wave function collapse? Is just a sensor, that "could have been" attached to a reporting device, that "could have been" looked-at by a Conscious Human...
  3. C

    I Aircraft guidance question: Effect of mounting sensors at the CG vs on the Tail

    Hi, Can I someone please explain to me, the moment behaviors of having something fixed on CG vs on Tail in a rocket? are there any benefits of having a Sensor on CG than fixed on the tail? Thank you
  4. PhysicsTest

    Engineering Hall Sensor Output for Position of Rotor in BLDC Motor

    I wanted to understand the output of the hall sensor to detect the position of the rotor in the BLDC motor. The hall sensors are placed 120degrees apart. I downloaded one of the TI application notes and understanding it, and referring to the diagram The rotor North and South is in a single...
  5. _maxim_

    Building an Affordable OD600 Sensor for Cell Concentration Measurement

    Hi all, I'd like to make an home-built OD600 sensor for measurement of cell concentration in suspension by Optical Density. There are several spectrophotometers in the market, indeed quite expensive, so I am interested in realizing a cheap device with standard components. Here's an example on...
  6. engnrshyckh

    Object detector using ultrasonic sensor with 555 timer

    See the attached figure. I used 220uF with buzzer and also tried 10uF capacitor but buzzer isn't loud enough. I don't have any 3.3pf capacitor. I used 1.1 pF instead. I also tried changing the resistance of potentiometer but still buzzer isn't sound loud enough.
  7. E

    Challenges and Solutions for Measuring Microamp DC Current with Hall Sensors

    I have been looking for sensors to detect DC current in the microamp range. I've been looking into hall sensors. I found an IEEE papers talking about one they designed, so I'm not too sure they're commercially available in that low of a current range. I haven't found any on DigiKey anyway. I...
  8. D

    I What is the temperature dependence of the NIRCam sensor's responsivity?

    I've read the NIRCam instrument uses HgCdTe imaging sensors... "JWST NIRCam has ten 2K × 2K HgCdTe detectors" https://jwst-docs.stsci.edu/jwst-near-infrared-camera/nircam-instrumentation/nircam-detector-overview I found this chart which displays the relative sensitivity of the NIRCam sensor...
  9. DhruvSorathiya

    I Could the Sun burn an image sensor of a star tracker in space?

    Hello, I have a question. If a star tracker in space faces the sun directly then could it be possible that the sun completely burns the image sensor? To be specific we are a student satellite team (Student satellite program IIT Bombay) developing a star tracker and we don't have an exact idea...
  10. Teru123

    Heat Flow in a Pipe with integrated Sensor

    Hello, I have the following problem and hope you can help me. I have the setup as shown in the drawing. A pipe that is flowed through, and in the middle of it another pipe, but at the end of this branch is a sensor. Initially the fluid would flow, with a temperature of 25°C. If my thought is...
  11. F

    What kind of magnetic sensor is used in my wristwatch?

    I'm trying to figure out what kind of magnetic sensor is used in my wristwatch (Casio Edifice twin sensor) a d how it works. Just out of curiosity. After some research, I got some clues. So, the first thing I'd like to know is how a magnetoimpedance sensor works? How is its circuitry? Some...
  12. N

    Medical Error measuring glucose optical sensor

    Hello We have designed an optical sensor to measure glucose. But we do not have the same changes for different concentrations. What do we need to do to be able to observe different Lifetime concentrations? In our sensor test, we used phosphorescence and glucose oxidase technology. The sensor...
  13. Raihan amin

    Understanding a heat sensor circuit?

    What I understand is that the β parameter of the npn transistor is temperature dependent. Increasing the temperature increases the collector current and hence the LED turns ON. But I don't understand the resistor arrangement.Also I can see that the diode is keeping the Base-Emitter junction in...
  14. M

    Why does my sensor show "gaps" every 16 units of resolution?

    Hello Gentlemen, I'm not an EE engineer, yet trying to help my colleagues. I would like to get a general feeling of what could be going on. Probably trivial for some of you. Background We have a motor/torque sensor device that is measuring torque values. We get out digital signals for Torque...
  15. U

    COMSOL: Newton's Iteration reached - Stress testing sensor

    It is a sensor with a fixed surface and a prescribed displacement on the opposite To remove this message error, I have tried to Increase iterations Refined mesh Applied parametric studies And some other ideas from forums However it still cannot be solved It also has a warning of MUMPS out...
  16. U

    COMSOL: stress on a sensor, how to use infinite element domain?

    At the risk of waiting hours on simulations of a sensor, I was wondering if I could use infinite element domain on COMSOL to simplify it. The first image consists of what I would like to simulate but found out that the simulation time is a huge factor as I have a lot to simulations to conduct...
  17. Stonestreecty

    Tire pressure Sensor Troubleshooting

    Good day, all I have a K1600 motorcycle. Will an after market tire pressure sensor work on a 2014 GTL? Dealers are crazy expensive and was told today that they are on back order. After search the TPMS Sensor Guide, I've new tires ready to be mounted, but a little confused. Any help will be...
  18. Rx7man

    Eddy current position sensor circuit

    I started a project, and where I thought I has a potentiometer position feedback, best I can tell I have an eddy current position sensor, which I'm absolutely not familiar with The application is a diesel engine injector pump (retrofitting to a different engine, it was from a Komatsu V12, no, I...
  19. hugo_faurand

    Amplifier for piezoelectric sensor, OP Amp circuit

    Hello everyone ! I'm working with a piezoelectric cell and I need to retrieve the variation of the charge of the cell as a voltage signal. I found this circuit (a charge amplifier) with an OP Amp ( here the piezo cell is represented as the current source with the capacitor and the resistor on...
  20. Z

    Don't know how to make an ultrasonic sensor circuit....

    Hello everyone, I am studying abroad and I am working on a speedometer project. I am preparing to use an ultrasonic transmitter and receiver to make an ultrasonic sensor circuit, and then connect it with the single-chip microcomputer msp430 to realize the functions of speed measurement and...
  21. F

    Electrical PIR sensor lags in taking pictures

    Hello, I am using a Raspberry Pi with a PIR motion sensor and a Pi Camera. The idea is that the camera should take a picture every time the PIR sensor detects motion. The system works but it does not respond, i.e. take a picture, as fast as I would like if I wave my hand in front of the PIR...
  22. Andrea Vironda

    Sensor for detecting piston axial position

    Hi, I have a steel piston running below a 3-4 mm thick steel wall. I'd need to know the piston position below the wall without drilling the wall. I'm thinking to an inductive sensor but I think it will not work because it will detect all the time something in front of him (the fixed wall)...
  23. rubenhak

    Adding Zooming Capability to my Far Infrared Spectrum Sensor

    Physics noob here. I have the cheapest FLIR sensor (80x60 px sensor). It captures Longwave infrared, 8 μm to 14 μm. It has a tiny lens (probably 1mm in diameter). Trying to add a zoom ability to this sensor. I have different DSLR lens and other optical scopes. I tried holding the tiny FLIR...
  24. J

    Is My ESP32-Cam + PIR Sensor + FTDI Assembly Correct According to Diagram?

    Hello people... I'm learning about ESP32-cam and I'm new to electronics, so I need some help. I want to do a project in which esp32-cam takes a picture and sends it to me, when he "sees" movement. For this, I use a pir. It has a schematic of how to do it, with an esp32-cam, a pir, and an ftdi...
  25. maxim

    Non magnetic linear displacement system for moving a Hall Sensor

    Dear mechanical expert I have to realize a linear displacement system for a Hall sensor that has to slide along the central axis of a narrow cylinder and with which high intensity magnetic field measurements (1-14 Tesla) have to be made. The field is produced by a commercial vertical magnet...
  26. Amathproblem22

    Python & Line Sensor (IR) for Robot Project

    I'm making a robot the will follow a black line and I need some assistance does anyone here have experience with python and line sensors.(IR) If anyone does I can elaborate on my issues more. Thanks
  27. Lord Crc

    Signal classification and processing for a gesture sensor module

    I got a gesture sensor module that produces a signal per event. The each signal is a set of regularly sampled readings from four photodiodes. The number of samples per event can be very different, from around 20 up to over 100, and each sample value is essentially the measured brightness...
  28. hagopbul

    Medical Question about a biosensor for decting coronavirus in saliva or in blood

    hello all : there was this technology that i read about maybe a year ago, could it help in better technology fast and reliable method to detect corona virus in saliva or in blood ? http://web.mit.edu/degenlab/index.html http://web.mit.edu/degenlab/degenlab_techniques.html...
  29. Wrichik Basu

    What is the metallic circular component in this voltage sensor?

    While searching for something else, I stumbled upon this https://robu.in/product/voltage-sensor-module/. It is idiotic to buy something like this, because a voltage divider doesn't cost more than a few cents. But what is the metallic circular component in the middle of the sensor? Some kind of...
  30. H

    DIY dyno calculation with an Arduino sensor circuit

    I would like to know if this formulae i have are good enough to make calculations. My plan is to count time of each roll with Arduino.I don't have roller yet so i don't know moment of inertia.angular acceleration = radians/secounds TORQUE = moment of inertia (kg∙m2) * angular acceleration RPM =...
  31. akaliuseheal

    How can I prevent increasing capacitance on my homemade sensor?

    Hello, I have made a capacitive water level sensor. It is a parallel plate capacitor. While measuring the capacitance of my sensor, I measure 53 pF. I then leave it for couple of minutes, still conected to the meter, capacitance then rises to 54 pF. Capacitance is slowly increasing. Why is...
  32. kunalvanjare

    Is it possible to connect a Hall Effect Flow Sensor output to a PLC?

    Hello guys, I am building a small prototype for a Coolant Dispensing System and need to measure the flow rate of water & chemical in the pipe in order to control the opening of valves downstream. Since I am building a small pilot system, I can't really spend too much money and hence I intend...
  33. C

    1.5 in-line/pigtail day/night sensor?

    I’m new here… So go easy on me please. I need a 1.5 in-line/pigtail day/night sensor… Help?
  34. M

    Sensor to Measure Differences in Light Wavelength

    What sensor to would i use to measure the difference in wave length periods. I want to make a rendered image of somthing that field of view that is being obstructed.
  35. akaliuseheal

    Capacitive soil moisture sensor using TLC555

    Hello everybody, I have made soil moisture sensor and it kinda works. It is a capacative sensor not resistive sensor based upon TLC555 which has a role to create square wave. Square wave is brought to a homemade capacitor. Capacitance changes with change of moisture. Output is measured voltage...
  36. nomadreid

    Sensor data in Deep Learning: questions on a simple level

    First of all: I am not a programmer, I cannot read code, only have a background in pure mathematics, am looking for a very simplified summary ("for Dummies") of the way Deep Learning and similar AI routines handle sensor data. I looked at a few articles such as...
  37. Aya ElElbshihy

    The usage of a Hydrogen sensor

    Hi all My mainly question is about why we won't be able to detect Hydrogen as Ex. gas using IR technology sensors? Also, I'd like to know if H2 would be detected using IR senosor? I need to know what is the equivalent technology for this purpose too? Thanks Ay ElEbshihy
  38. R

    Find suitable SI units to work with a Vibration Sensor

    We are working on an IOT project in which we are trying to learn about different vibrations of using Wireless Vibration Sensor According to the manual, the wireless vibration sensor is giving the output while testing on CNC machine device 0.75, 0.71,0.69 whose SI units are in 'g'(which is...
  39. V

    Find the Acceleration and Distance from the Output of an Accelerometer Sensor

    My question is kindof related to physics, as I have an Accelerometer sensor through which I am able to get the sensor data as following: x = 192 y = 433 z = -453 I need to convert these values in such a way so that It will share Acceleration in cm or meters, And also what concept I should use...
  40. T

    Calculating phasors from sensor readings

    Hi! I am working on a project (hobby basis) and with limited EE background. I wish to make a polar plot, showing the current and voltage phasors for each phase (unbalanced 3-phase, 3 wire system (IT system), se picture below.). I have obtained the following readings (instantaneous values)...
  41. Aleoa

    Linear behavior and dynamic behavior of a sensor

    I want to model a sensor with the static behavior: y(t)=a+by_{0}(t) using a first order lag: G(s)=\frac{K}{1+Ts} However, if i try to convert this order lag in time domain and set the derivative as 0, what i get as static response is: y(t)=Ky_{0}(t)=by_{0}(t) And the a constant has...
  42. J

    EEE Student Seeks Help for Strain Sensing Project

    Hello, I am a 3rd year EEE student and am working on a project that will go on to form my 3rd year dissertation. I am having trouble formulating a project idea from the guidelines. I was told I should use a strain sensor to form some kind of self sensing smart material that could be used to...
  43. Javier Lopez

    I Ion sensor for 1e20 ions/m3 density

    What kind of ion sensor can I use in the range 1e19to 1e22 ions/m3? (corresponds to 0.1 to 5 pascals if non ionized) Does it exist any sensor based in the charge capacity?
  44. J

    Air Turbine Design -- advice regarding a Hall sensor type air flow meter

    Hello all, I am after some advice regarding a hall sensor type air flow meter. I know from experience that most hall sensor flow meters allow a bypass of fluid around the turbine/fan. However I would like to know what would happen if this was the case of the design below. Specifications...
  45. R

    Interface Wireless Frequency Sensor with Arduino

    Hello, I am going to interface wireless frequency meter transmitter with Arduino but before starting regarding sensor, I need to test the signal strength of this sensor (at different distances) by interfacing it with Arduino, I have never been used such kind of sensor before so any suggestion...
  46. R

    Automotive Automotive MAF sensor vs temperature

    I'm working on a DIY EFI system for automotive use. I have a question about the mass air flow sensor operation. I know they measure the volume of air passing thru them. But the question is whether that measurement needs to be corrected for air temperature or if the MAF sensor does that by...
  47. A

    What are the best software options for simulating semiconductor gas sensors?

    which soft wares are used in gas sensor simulation?
  48. adamaero

    What is the ASCII code an ultrasonic sensor will output?

    Problem statement For an ultrasonic sensor (MB7380) sending 8 data BITS, no parity and one stop bit, what is the ASCII code it will give for a certain distance like 0.15 meters (0.5')? maxbotix.com/documents/HRXL-MaxSonar-WR_Datasheet.pdf#page=2 Attempt at a solution I do not know how to...
  49. akaliuseheal

    Use of 4 floating current sources

    Homework Statement I have 4 resistive sensors thus I need to tie 4 floating current sources. Floating current source will give me output voltage linear to the resistance of a sensor. I know it is not the best solution but it is good enough. Image provided: Homework Equations None The Attempt...
  50. A

    Electrical Audible warning from IR sensor

    I am an occupational therapy student an I need help with electronics. Can I connect an IR sensor to a buzzer without using an Arduino? If yes, can I have any suggestions? Thanks in advance.
Back
Top