A mass M in held in place by the applied force F and the pulley system shown below. The pulleys are massless and frictionless. Determine the tension in each section in each section of rope and the applied force F
Taking upwards as positve
-T1 - F = 0
T4 - T1 - T3 = 0
T2 + T3 - T5 = 0...
In Figure 6-63, a block weighing 22 N is held at rest against a vertical wall by a horizontal force of magnitude 60 N. The coefficient of static friction between the wall and the block is 0.55, and the coefficient of kinetic friction between them is 0.38. In six experiments, a second force is...
So, I have created some blocks, and draw the FBD myself, am not sure if I did it right or not, so I'm going to upload these FBD here, and hope you guys can correct me if I'm wrong. Thanks a lot.
A block of m1 and m2, m2 is siting on top of m1. Assume there is no friction on the ground under m1...
A block of mass m1 = 4 kg is put on top of a block of mass m2 = 5 kg. To cause the top block to slip on the bottom one while the bottom one is held fixed, a horizontal force of at least 12N must be applied to the top block. The assembly of blocks is now placed on a horizontal, frictionless...
A slab of mass m1 = 40 kg rests on a frictionless floor. a block of mass m2 = 10 kg rests on top of the slab ? Between block and slab, the coefficient of static friction is 0.60, and the coefficient of kinetic friction is 0.40. The block is pulled by a horizontal force with a magnitude of 100 N...
A 1000kg boat is traveling at 90 km/h when its engine is shut off. The magnitude of the frictional force fk between boat and water is proportional to the speed V of the boat: fk = 70V where V is in meters per second and fk is in newtons. Find the time required for the boat to slow to 45 km/h...
5. A 12N horizontal force F vector pushes a block weighing 5N against a vertical wall. The coefficient of static friction between the wall and the block is .60 and the coefficient of kinetic friction is .40. Assume the block is not moving initially.
(A) will the block start moving?
(B) What...
4.0 kg block A and 6.0kg block B are connected by a string of negligible mass. Force a Fa = 12N acts on block A; force B Fb = 24N acts on block B. What is the tension in the string.
I was able to draw FBD and lists all the forces acting on A and B, but what I don't understand is the tension T...
two containers are connected by a cord (of negligible mass) passing over a frictionless pulley (also of negligible mass). At time t = 0, container 1 has mass 1.30 kg and container 2 has mass 2.8 kg, but container 1 is losing mass (through a leak) at the constant rate of 0.200 kg/s.
a) At what...
A chain consisting of five links, each of mass 0.1 kg, is lifted vertically with a constant acceleration of a = 2.5 m/s2. Find the magnitude of
(a)the force on link 1 from link 2
(b)the force on link 2 from link 3
(c)the force on link 3 from link 4
(d)the force on link 4 from link 5...
A 40 kg girl and an 8.4 kg sled are on the frictionless ice of a frozen lake, 15 m apart but connected by a roped of negligible mass. The girl exerts a horizontal 5.2N force on the rope. What are the acceleration magnitudes of
(a) the sled
(b) the girl
(c) how far from the girl's initial...
An elevator cab and its load have a combined mass of 1600 kg. Find the tension in the supporting cable when the cab, originally moving downward at 12 m/s, is brought to rest with constant acceleration in a distance of 42m.
Taking downwards as positive
My solution:
F net = mg - T = ma
T =...
I was trying to do this problem, but I got t negative, so I went back from the beginning and looked for my errors, but I couldn't find one. Can anyone tell me what I did wrong ? Thanks
You drop a ball from a window on an upper floor of a building and it is caught by a friend on the ground when...