maybe a zeener diode would work
maybe a zeener diode in series with a resistor / you would have to calculate the values / seems to me the would limit the voltage and the resistor would limit the current. i do not know. check it out first. good luck
try the local electrical store and see what gel cel batteries are available. some emergency back up lights use this size of battery. you could use a 6v and then take it home and charge it up. the most important is you pick up one of adequate current rating to deliver your current after a...
check out the varian brothers. klystron tube shop at stanford. ilc in germany. hutchinson effect.(( and the philli experiment ( someones imagination of what tesla was talking about) ))
hope i do not get suspended for this.
.....just a thought for safety. Try using a proper adapter because a car charging system works on voltage differentials tocharge the battery. say a battery at 12v is being charged and the charging circuit is operating at 16 volts. Your cigarette lighter output will be at 16 volts . sorry i...
check out beam one
check out beam one
select electron beam technology then how it works
wait for the animation to start in the black box
this is electron beam for industry
if you add an xray converter to this you have a low power xray source
i was checking out the web and ran across an experiment in Siberia that had a grant.
the experiment was a 300 kw electron beam at 5 MeV for efficient conversion to xray.
to me this has such an interesting use for industry both electron beam and xray. if it had a 10% efficiency on power used...
i have a simple question about klystrons.
okay if i need say a 2 Mw rf pulse but i only have 10 200kw klystrons. assuming no regular losses. Can I connect these 10 klystrons in parallel. Do I need to phase shift the inputs of 9 to syncronize the outputs? Can I operate them continuously or...
On the new Thales Th1801 multi beam klystron. All the cavities are shared so they all see the same field. The final output cavity has two windows. Is the final output cavity all one since the klystron can operate without one beam or is it divided? If there are two outputs are they 5 or 10 Mw...