Search results

  1. I

    Current sensing and standard resistor

    The power supply is a 12-15vdc 15amp. We use them to power battery chargers and tire truer. I race 1/12 scale RC cars. The tire lathe is to cut down foam tires to achieve proper roll out.
  2. I

    Current sensing and standard resistor

    It is black brown silver gold. I will check the specs on other resistor. My local distributor has access to five resistor manufacturer , and not a one offer. 01 ohm 2watt. Smallest I could find is .1 ohm 2watt. I guess I could parallel a bunch of .1 but don't have the space.
  3. I

    Current sensing and standard resistor

    I have a 12v switching transformer; one of the legs on a black brown silver gold 2w resistor is broken off. I have had zero luck finding a standard .01 2w resistor. I did find a current sensing resistor at the values, but should it be used. The resistor in the power supply is ceramic, I think...
  4. I

    Over stock wire

    50,000 feet of red and 75,000 feet of black it is all in 25,000 feet barrels... There was a double p.o. put in for it.
  5. I

    Over stock wire

    I Don't know if this is the correct place for this post but here goes. I am looking for a supply house or distributor who buys wire I have a lot of 1015 22 red and black. I work for a company in carmel indiana who builds wire harnesses. Please point me in the correct direction. Thank you Brandon
  6. I

    Need help with resistor watts

    The Quencharc or snubber is used to protect the relay in the watlow controller. I have a watlow output relay going to the coil on a mercury displacment switch. I have to per manufacture put the snubber on the coil on the merc switch. so that would put the snubber in parrarell with the 1k...
  7. I

    Need help with resistor watts

    I have an oven and the heater element is ran by a watlow controller. It is going out evey two or three years. The watlow controller runs a relay to turn element on and off. The relay on the watlow needs a load of 100ma min. to keep contacts clean. I have the resistance of the coil for the on off...
Top