Search results

  1. C

    Multiple temperature reservoirs

    I have a problem: A typical compartment domestic refrigerator with freezer can be represented by 3 temperature reservoirs connected to the cyclic device which absorbs W' of work. - cool box at Tc = +279K from which Q'c heat is extracted - freezer at Tf = -269k from which a further Q'f...
  2. C

    Principal stresses help ?

    Principal stresses help plz? I am looking through past paper examinations and have come a across a question: At a certain critical point in a stressed component, calculations show that the stresses are sigma(x) = 220MPa sigma(y) = -95MPa and shear = 60MPa Find the maximum and minimum...
  3. C

    Current against slip relationship of induction machine?

    Current against slip relationship of induction machine?? Please could someone explain to me the relationship between the current and the slip value of an induction machine. I have plotted a graph and Im wondering how to interpret this? Thankyou.
  4. C

    Understanding of the fourier coefficients?

    Im just looking through examples of finding the fourier coefficients. in one particular example bn is found to be = (-1/npi) (cosnpi - cos 0) then it says this is 0 when n is even and 2/npi when n is odd are we just substituting values of n e.g. 1,2,3..... to find this result? i...
  5. C

    Is the function odd, even or neither?

    The function f(x) 1, -pi < x < 0 0, 0 < x < pi now after sketching the function i believe i am correct in saying it is neither symmetrical about the x axis or the origin and therefore is neither odd nor even? It is a square wave? Am...
  6. C

    To find the sum of a fourier series ?

    to find the sum of a fourier series....? My problem is: I must find the sum of ((-1)^(n+1))/2n-1 between infinity and n=1. I have looked in all my available textbooks for a clear example but im still unsure as to how i should approach the problem? Help with this would be much...
  7. C

    Please check my solution

    I have to differentiate (e^-x) ((1-x)^1/2) twice: The first time i differentiate i get (-e^-x) ((1-x)^1/2) + (e^-x) ((1-x)^-1/2) (-1/2) then differentiating this i get [(e^-x) ((1-x)^1/2)] - [(e^-x) ((1-x)^-1/2) (-1/2)] + [(-1/2e^-x) (1/2(1-x)^3/2) + ((1-x)^-1/2) (1/2e^-x)] are...
  8. C

    Please check this differentiation result

    I have to differentiate (e^-x) ((1-x)^1/2) my answer is: (-e^-x) ((1-x)^1/2) + (e^-x)/((-1/2 + 1/2x)^-1/2)) is this correct? thankyou
  9. C

    Table leg design

    table leg design...... Suppose i want to make 4 table legs from aluminium square tube.......how should I go about designing the dimensions of the square tube? The table itself needs to support a load of 90kg through the four legs. Help on this would be very much appreciated. Cabellos
  10. C

    Aluminium framework .

    aluminium framework..... I am designing an aluminium frame bed. I have desided to use aluminium extrusion either square or rectangular shape to form the main 4 bars at the base supported by 4 legs. I will use panels of plywood at the centre holding the mattress. My question is.......suppose...
  11. C

    Would this work ?

    Would this work....? Im designing a folding bunk bed and was wondering whether to keep the weight down I could use a metal wire mesh material as the top bunk fixed to aluminium square tube? Also would it be possible to attach this to the tube main frame fairly easily and how much does the...
  12. C

    Stress analysis of bed design

    Stress analysis of bed design.... I have a bed design and i need to do a stress analysis of the top bunk under a 90kg load. I will be designing it from 20mm thick plywood but i need to work out whether this is thick enough to support the load and also determine the width of the leg supports...
  13. C

    Designing folding legs for a bunk bed .

    Designing folding legs for a bunk bed..... Im having trouble finding a suitable hinge mechanism which would allow 2 legs under a bed to be locked and pulling them down into a vertical position they would lock. Does anyone have any ideas or links to a suitable hinge design. Thanks
  14. C

    Directional derivative?

    Im doing the following question: calculate the directional derivative of the function f(x,y,z) = z/(2x + y) at the point (0,1,1) in the direction d = 2i - 2j - k could someone please check my answer is correct as i calculated -3i -6k Also how do i find the unit vector in the direction...
  15. C

    Differentiating with respect to

    differentiating with respect to.... I have a question on differentiating the function z/(2x + y) with respect to x. Is the answer -2z/(2x + y)^2 ? Thanks:smile:
  16. C

    Partial differentiation

    Iv forgotten the basics of this. How do we go about differentiating 3x^2 y^2 w.r.t y? I know the answer is 3x^2 y^2 but could someone explain this for me please?
  17. C

    Inverse laplace method for equation .

    inverse laplace method for equation ..... Just doing some revision but im a little stuck on how to find the inverse laplace of 1/s(s-2)
  18. C

    Laplace transform sint * cost

    how do i go about solving the laplace transform of sint * cost ??? i know the answer becomes 1/(s^2 + 4) but what is the method? thanks.
  19. C

    Differentiating with respect to time

    How do you go about differentiating rcos$ with respect to time....? In the book im studying from it says d$/dt d/d$ (rcos$) is the process to find the answer... but what does this mean...?
  20. C

    Integrate with respect to x

    I just need a check on when integrating sin(xy) with respect to x? Does this become -cos(xy) or -cos(x) thanks
  21. C

    Material derivative?

    material derivative??? I have to find the material derivative of the density P for the following steady state flow: P = -1-2xy-3z^3 and u = (3x-z, y+3z, x-y) I have looked at previous examples but im not sure what i have to do with the density -1-2xy-3z^3 ..... ? please help.
  22. C

    Differentiation check ?

    I should know this, but i just wanted to check....differentiating ln(3y-2z) with respect to z...............does this = -1/2z ???
  23. C

    Fatigue question ?

    Im having a problem with the following question and my understanding of it... An aluminium alloy obeys the fatigue law S = 895N^-0.12, where S is the stress amplitude and N is the number of cycles. An airdraft componentfabricated from this alloy, undergoes the following stress amplitude...
  24. C

    Spring hinges?

    Spring hinges..??? I need a spring type hing to do a particular job. From a closed position when in use it can be pulled open to 90 degrees and locks in position. Then can be released to spring back to closed position? Also could one open to 180 degrees?....is this possible? thanks
  25. C

    Inverse laplace question help

    inverse laplace question help plz.... i am trying find the inverse laplace transfor of s+1/s^2 -4s +4 using partial fractions and solving my answer is e^2t + 3e^2t however checking this in an online fourier-laplace calculator it comes up with e^2t + 3te^2t who is correct? could you...
  26. C

    Inverse laplace transform question

    How do i find the inverse laplace transform of s/(s-2)^2
  27. C

    Dumb partial fractions question

    dumb partial fractions question.... suppose i get x+1=A(x-2)+B(x-2) how do you then find A and B?
  28. C

    Laplace transform please check my answer

    I have to find the laplace transform of (t+2)sinh2t my answer is (4s/(s^2 + 4)^2 ) + (4/(s^2 - 4)) is this simplified as much as possible....?
  29. C

    Laplace transform

    My understanding of the laplace trasnform isnt so great so i would appreciate some help with this question please: find the laplace transform of (t+2)sinh2t now i know the laplace transform of sinh2t is 2/(s^2 -4) as this is a standard rule...... looking through textbooks they show the...
  30. C

    Analyse forces of bed

    Analyse forces of bed.... Hi, As shown in my earlier post i need to analyse the forces of my bunk bed design I know how to analyse forces in 2d beams and trusses etc but my problem involves a bed supported on a wall by 2 slide rail mechanisms and 2 support legs as shown in the link. The user...
Top