Search results

  1. S

    Inverse of a square matrix in C

    thanks alot..! i'll try this in microC software which involves some special commands for matrices and let you know if there is a problem.:blushing:
  2. S

    Inverse of a square matrix in C

    Thanks for the reply. The algorithm is pretty tough and confusing enough to break heads. The matrices are dynamic type,3by3 and symmetric.Thanks for the link.:blushing:
  3. S

    Inverse of a square matrix in C

    Hello all. Iam trying to implement an algorithm which involves several matrix inversions.The algorithm is an extended kalman filter which is a recursive one. Can anybody help me in writing a C program to solve the inversion problem or any good links? thanks in advance..!
  4. S

    Programming PICs in C

    Hi all. Iam trying to write extended kalman filter algorithm in microC (dspic) software. My question is how to invert a matrix in that software? I have read the manual but could'nt find any command for matrix inversion.pls check out the attachment. can anyone help me out...! thanks in advance.
  5. S

    Help, very simple mikroC compiler question.

    hello..you can find the hex file in the same directory in which you have created the project. microC generates hex file only if it is built without any errors. waiting to hear from you..!
  6. S

    Gyroscope for angular rotation

    Where can i find the datasheet?
  7. S

    Gyroscope for angular rotation

    Hello..! Did you see the material which i sent u. Is my equation correct?
  8. S

    Gyroscope for angular rotation

    Here is some information regarding the equation:[PLAIN]www.egr.msu.edu/classes/ece480/goodman/.../Final%20Report_Web.doc[/URL] ON PAGE NUMBER 31. Other documentation:From IEEE paper(Application of an Inertial Navigation System to the Quad-rotor UAV using MEMS Sensors Tin Thet Nwe, Than Htike...
  9. S

    Gyroscope for angular rotation

    hello thanks for the reply. Iam giving 3Volts as the supply for the gyro. Should i use (Vout-Voffset)*5/1024/sensitivity or (Vout-Voffset)*3/1024/sensitivity Right now iam using the 1st equation.On stationary the gyro outputs around:x-axis -7.28deg/s and z axis -7.28deg/s when i rotate quite...
  10. S

    Gyroscope for angular rotation

    Hey i got the correct answers.no need to invert the factor 5000/1024. The correct equation is: x_deg/sec=(Vout-Voffset)*(5/1024)/0.00067(V/deg/s) 0.00067--->sensitivity Voffset--->1.23V as per datasheet. On stationary, the gyro outputs near 7deg/sec(due to erros) On rotating rapidly along...
  11. S

    Gyroscope for angular rotation

    The datasheet reads: 1.23V+SoA*1500=2.23V for 1500deg/s Where, 1.23 is the Vref or Voffset SoA=0.67mV/deg/s That means Vref+SoA*angle=Vout implies-->angle=(Vout-Vref)/SoA From IEEE paper(Application of an Inertial Navigation System to the Quad-rotor UAV using MEMS Sensors Tin Thet Nwe...
  12. S

    Gyroscope for angular rotation

    OH sorry..! It's in the 9th page figure4 below the diagram.:-) He has given the equations for the full scale deflection i.e,1500 deg/s.
  13. S

    Gyroscope for angular rotation

    I didn't understand what you are saying.Can you be more elaborative please?
  14. S

    Gyroscope for angular rotation

    BUT, as per the datasheet the equations are correct it seems.Here is the link for data sheet:http://www.sparkfun.com/products/9412 Full scale reading:1500°/s max deflection is a lot! This means you've really got to spin the board quickly to see a change in output. This sensor range is good...
  15. S

    Gyroscope for angular rotation

    Thanks for the reply. First i tested the gyro by keeping the ST pin of gyro high, i checked the v_offset=1.23V approx. After i grounded the ST pin: When there is no rotation the outputs from 4x and 1x are same i.e,1.23V approx. when i move the gyro rapidly in any Axis the 4x output varies...
  16. S

    Gyroscope for angular rotation

    hello all.. Iam using LPY5150AL Breakout gyro. I have connected to a PIC16F877A microcontroller.The problem is that iam getting outputs of gyro around 1100 -1300 deg/sec when i rotate the axes.I donot know whether these values are correct are not??can anyone help me out..! The formula used is...
  17. S

    Inertial navigation system

    hello all.. Iam using LPY5150AL Breakout gyro. I have connected to a PIC16F877A microcontroller.The problem is that iam getting outputs of gyro around 1100 -1300 deg/sec when i rotate the axes.I donot know whether these values are correct are not??can anyone help me out..! The formula used is...
  18. S

    Sensor fusion using extended kalman filter

    hi..! Iam trying to implement a mobile robot navigation system based on extended kalman filter. I need to fuse the data from the encoders with the two accelerometer's data. The states are: Xk={x,y,theta} where x,y are the coordinates and theta is the heading angle. Can anyone help me in...
  19. S

    Mechanical shaker for vibration testing

    Hi all. Iam trying to find out an mass-damper-spring equations for a 1-DOF mechanical shaker for the purpose of plant model equation.Further, this equation is used in kalman filter algorithm with measurement model of an accelerometer. Can anyone help??? Thanks in advance...!
  20. S

    Sensor fusion using extended kalman filter

    thanx 4 your kind reply..,iam just a beginner.Right now iam surveying the literature regarding kalman filter.im using ADXL345 accelerometers..,kindly help me in choosing plant model and measurement model...! thanq
  21. S

    Sensor fusion using extended kalman filter

    hi all, m trying to implement sensor fusion of two three axis accelerometers data.can any one help me in modelling this sensor and fusing for state estimation using EKF??? thanks in advance.!!
Top