Search results

What are the other types of geothermal cycles aside from dry, binary and flash?

In my solution, first circle is 10 then the second is 5. after that, I used s = a/(1-r). a=25 since 5 will be squared and r=1/4. So my solution is A = pi[10^2 + 5^2 +25/(1-1/4). so my answer becomes 475/3 pi.

Homework Statement Please see the attached figure The radius of the biggest circle is 10. The required is the sum of all circles and the sum of all triangles in the figure. There is an infinite number of circles and triangles. My answers are: for circle: 475/3 pi for triangle: 175/2...

Ok. I got it now. Thanks a lot.

So buoyant force will be added? I got it. How about if water spills? The spilled water will be the buoyant force that will be out of the pail. However, the object exerts a force equal but opposite of the buoyant force, so it adds weight? correct?

So it adds weight. The weight added will be the weight of the object when in air, since buoyant force will be cancelled?

before, the tension is the weight of the object. when submerged, the tension change since there is a bouyant force that acts on the object. Am I correct?

Well, I think it does not add. Since the object is hung? Am I correct?

I have a question, if a hung object is submerged in a pail of water, does the weight of the pail with water increase. The object is still hung and no water spills.

Suggest some designs that can be a contest for 3rd year college students. The materials that will be used are recycled as much as possible. For example, a mouse trap car.

This what I think: since the liquid is more dense than water, then the cone will float a little. From triangle, 0.8 becomes 0.8+y and 0.4 becomes 0.4-y. The ratio and proportion becomes 0.4/1.2 = x/(0.8 + y). Am I correct? or the cone will sink a little?

Homework Statement Given: diameter 0.8 m height 1.2 m floats in water how far will it sink in a liquid (density =1360 kg/m^3) Homework Equations Buoyant force The Attempt at a Solution In the attachment I'm stuck on how to find the volume of the submerged cone in the...

please explain this to me

Homework Statement Moist air at 40 C and 90% R.H. enters a dehumidifyer at the rate of 300 m3/min. The condensate and the saturated air exit at 10oC through separate exits. The pressure remains constant at 100 kPa. Determine (a) the mass flow rate of dry air, (b) the water removal rate, and...

please help me

Homework Statement Help with the viscosity. The problem is in the attachment. My prof does not yet teach the lesson but we have to answer the problem. Homework Equations The Attempt at a Solution

Is J there the J of the smaller circle, with the inside diameter? I got 243 Mpa which is larger than 150 Mpa.

The J and r are already substituted in the formula I used. Ok thanks.

Homework Statement Given: hollow steel shaft Torque = 5400 Nm Torsional Shear = 150 MPa Required: Inside diameter Outside Diameter Stress on the inside of the shaft Homework Equations The Attempt at a Solution I solved both the diameters which are 64.49 mm and 48.37 mm...

please check my answer

Homework Statement Find the heat flow and the interface temperatures of the given figure. Homework Equations The Attempt at a Solution Do solve it correctly? I do not know how to solve the interface temperatures in case of parallel. Can you explain to me how to solve it

who knows what should i do?

Homework Statement given the ultimate analysis of the fuel c - 88.3% h - 9.5% o - n - s - 1.4% ash - 0.8% find the: a. raf and rgf b. concentration of so2 and particulate matter if excess air is 20%. i know how to calculate the raf and rgf, i also know how to compute the so2 and...

does the specific heat capacity has something to do with this?

Why heating water at 90C takes longer than heating water at lower temperatures such as 70C?

thanks for the information. About my second question, what steel is used in manufacturing LPG cylinder? Like the steel C1040. By the way, what is beading process in manufacturing or metalworks?

I don't have a textbook. So I'm looking on the internet. I just want to know what is C, 10, and 40 on the steel given.

Homework Statement Given the steel C1040. What do you mean by C, 10, and 40 in that steel? What is the common type of steel used in manufacturing LPG cylinder?

i found all about the drawing process. I cannot find the remaining. I searched the internet for those words. In trimming, I only found that they used trimming but no definition. In beading, it showed not the metalwork process but the other one.

please someone tell me.

Homework Statement What are the definitions and functions of drawing, trimming, and beading processes in metalworks such as in manufacturing process?

may i ask what is that comma in the equation?

i'll do it later. I'm going out now

yes. I have coils in the fm radio circuit. so does it?

i'll post a pic later. The coil included in the kit are 4 turns. Does this affect the signal or station that can be acquired? or Does the feet of those coils affect the signal?

I have tried that but i only get 1 station the others are not clear, what should I do with that?

a telescoping antenna, the one that can be extended/

Homework Statement I bought an FM radio mono kit. After I assembled it, it works. But I want to know how to have a clear reception or signal and to acquire more stations. What should I do? Any tips or techniques? does the coil affects the signal? Homework Equations The Attempt at a...

the equation that involves in that problem is summation of XS=1/2 W/g [v2 - vo2]

it involves the work-energy equation. the answer is from my teacher.

Please someone explain to me...

Homework Statement Can someone teach me on how to solve this problem? This is a dynamics mechanics problem. I tried everything I know but I cannot really get the answer. Please help ASAP. Homework Equations The Attempt at a Solution

Can someone show me the derivation?

Homework Statement Can someone tell me how the (square root of three) factor is derived in a three phase generator? Homework Equations The Attempt at a Solution

what is the normal acceleration doing?

its only a sketch angular velocity at 2 is constant

its only a sample, only a schematic drawing.

I mean in a mechanism, the sliding block, the normal in a flat surface is zero?

i mean in a mechanism, in a flat surface. the sliding block has zero normal? I'll be back.

so normal is zero in a sliding block?