Ball Free Fall Homework: Speed & Energy Calculations

In summary, the ball bounces back to 1.4m after dropping from a height of 2.5m. Air resistance is taken into account and the ball gets faster and gaster as it falls.
  • #1
chawki
506
0

Homework Statement


When the ball dropped from a height of 2.5 m on the floor, it bounces back to 1.4 m in height.
Air resistance is taken into account. g= 9.81 m/s2

Homework Equations


a) the speed at which the ball hits the floor?
b) How much of the energy consumed in collision with a change of direction?

The Attempt at a Solution


a)
V2-V02=2gh
V=[tex]\sqrt{}(2gh)[/tex]
V=[tex]\sqrt{}2*9.81*2.5[/tex]
V=7m/s
i'm wondering why they gave us the information that the ball will bounce 1.4m high...

b)
E=1/2*m*V2
we don't have the mass of the ball
 
Physics news on Phys.org
  • #2
in responce to your question about why they gave you the final height of the ball..

At the begiing you start with a certain amount of energy, it could be sound, could be heat could be anything. In this situation it is gravitational potential energy which is equated as m*g*h. because the ball wants to go down, but you are holding it up.

The ball is then let go and falls to the ground. Energy is always conserved so all this energy must turn into Kinetic Energy jusssttt as it hits the ground.

let me explain:
KE = 0.5*m*v^2 and GPE = m*g*h

as you let go of the ball, h gets smaller and smaller. so GPE gets smaller
ALSO the ball gets faster and gaster, so KE gets faster.

And it just so happens, that the initial GPE = final KE when the ball touches the ground

Ok so the ball touches the ground, you have no GPE, only KE. Obviously the ball can not move faster, so it hits the ground and slows down dramatically. All this KE turns into ELASTIC POTENTIAL ENERGY because obviously the ball has some elasticity to it. so the ball squishes until it can't squish anymore than BAM it un squishes itself and shooots back into the air.

now if there where no losses or work done by the system, the ball should return to its original height. However it didnt!
therefore if you compare the initial GPE at 2.5m and the final GPE 1.4m, obviously they won't match up as they have different heights. they should be the same, but they arent cause all the enregy that would be used to push the ball back to its original height has been lost somewhere along the system :)
 
  • #3
You can use the height at which the ball bounced back up, 1.4m, to determine the answer to part b, you don't need the mass, the mass will cancel out, simply compare the energy of the ball at the start of its free fall and then the energy immediately as it hits the ground and begins to bounce back upward and you'll see the change in energy must be due to energy absorbed in the collision, if there's no air resistance.

Hint: don't use the kinetic energy formula, (1/2)mv2 for this, it's much easier to compare gravitational potential energies at the very start and very end: mgh. A lot will cancel out.
 
  • #4
faymalaka said:
in responce to your question about why they gave you the final height of the ball..

At the begiing you start with a certain amount of energy, it could be sound, could be heat could be anything. In this situation it is gravitational potential energy which is equated as m*g*h. because the ball wants to go down, but you are holding it up.

The ball is then let go and falls to the ground. Energy is always conserved so all this energy must turn into Kinetic Energy jusssttt as it hits the ground.

let me explain:
KE = 0.5*m*v^2 and GPE = m*g*h

as you let go of the ball, h gets smaller and smaller. so GPE gets smaller
ALSO the ball gets faster and gaster, so KE gets faster.

And it just so happens, that the initial GPE = final KE when the ball touches the ground

Ok so the ball touches the ground, you have no GPE, only KE. Obviously the ball can not move faster, so it hits the ground and slows down dramatically. All this KE turns into ELASTIC POTENTIAL ENERGY because obviously the ball has some elasticity to it. so the ball squishes until it can't squish anymore than BAM it un squishes itself and shooots back into the air.

now if there where no losses or work done by the system, the ball should return to its original height. However it didnt!
therefore if you compare the initial GPE at 2.5m and the final GPE 1.4m, obviously they won't match up as they have different heights. they should be the same, but they arent cause all the enregy that would be used to push the ball back to its original height has been lost somewhere along the system :)

Great explanation, thank you :)
 
  • #5
soothsayer said:
You can use the height at which the ball bounced back up, 1.4m, to determine the answer to part b, you don't need the mass, the mass will cancel out, simply compare the energy of the ball at the start of its free fall and then the energy immediately as it hits the ground and begins to bounce back upward and you'll see the change in energy must be due to energy absorbed in the collision, if there's no air resistance.

Hint: don't use the kinetic energy formula, (1/2)mv2 for this, it's much easier to compare gravitational potential energies at the very start and very end: mgh. A lot will cancel out.

Actually they said that the air resistance is to take account of it...
I don't get what they ask in part B, the result should 44%
and if we compare (substract) Energies at different heights, we won't get that 44%...
However i could find that 44% but still don't get what they ment..
 

1. What is ball free fall and how does it differ from regular free fall?

Ball free fall is the movement of a ball in a vertical direction under the influence of gravity. It differs from regular free fall because the ball has a defined shape and size, whereas in regular free fall, the object is assumed to be a point mass.

2. How is the speed of a ball in free fall calculated?

The speed of a ball in free fall can be calculated using the equation v = gt, where v is the speed, g is the acceleration due to gravity (9.8 m/s²), and t is the time the ball has been falling.

3. What is the formula for calculating the potential energy of a ball in free fall?

The potential energy of a ball in free fall is calculated using the equation PE = mgh, where PE is the potential energy, m is the mass of the ball, g is the acceleration due to gravity, and h is the height the ball has fallen from.

4. How does the height of a ball affect its speed and energy in free fall?

The higher the ball is dropped from, the greater its initial speed will be and the more potential energy it will have. As the ball falls, its speed will increase due to the force of gravity, while its potential energy will decrease. When the ball reaches the ground, all of its potential energy will be converted into kinetic energy (motion).

5. What are some real-world applications of calculating speed and energy in ball free fall?

Some real-world applications of calculating speed and energy in ball free fall include predicting the trajectory of a projectile, understanding the forces involved in sports such as baseball or golf, and designing amusement park rides that involve free fall motion. It is also important in engineering and physics experiments to study the effects of gravity on objects.

Similar threads

  • Introductory Physics Homework Help
Replies
34
Views
694
  • Introductory Physics Homework Help
Replies
7
Views
4K
  • Introductory Physics Homework Help
2
Replies
38
Views
1K
  • Introductory Physics Homework Help
Replies
25
Views
469
  • Introductory Physics Homework Help
Replies
15
Views
1K
  • Introductory Physics Homework Help
Replies
7
Views
3K
Replies
10
Views
423
  • Introductory Physics Homework Help
Replies
11
Views
1K
  • Introductory Physics Homework Help
Replies
13
Views
1K
  • Introductory Physics Homework Help
Replies
12
Views
1K
Back
Top