Burnup Conversion: Convert MWd/kgU or GWd/tU to %

[Johnnyfer]

Is there a conversion method to convert burnup from MWd/kgU or GWd/tU into % ? Always assuming that the fuel is UO2 with ~ 200 Mev per fission.

 

[Astronuc]

One should be able to take a mass of fuel, either initial moles or grams of U235+U238 in UO₂, and determine the energy on the basis of atomic fraction and mass. One can assume 95% TD of UO₂ or about 10410 kg/m³ (10.41 gm/cm³), then remember to convert mass of UO₂ to mass of U.

I've seen different conversion ratios with a range of something like 9.38 to 9.75 GWd/tU per 1% fima, and some use a mid-range value of 9.5 GWd/tU/fima. The factor depends on the neutron energy spectrum and the proportions of fast fissions in U-238 and in U-235/Pu-239/u-241. The Pu isotopes come from the conversion of U-238 to Pu-239/-240/-241 via neutron capture and subsequent beta decays. The energy release from Pu isotopes is closer to 205 MeV per atom, while that of U-235 is slightly less than 200 MeV. I believe Studsvik-Scandpower has published some papers on the subject.As one example Nuclear Hydrogen Production Handbook, in section 10.2.1.3 (page 223 in the textbook), the authors describe a test in ATR in which fuel achieved burnups of 11.5–19.6% FIMA (108–184 GWd/tU), which gives a conversion ratio of ~9.39 GWd/tU = 1% FIMA), but that's in ATR with the particular type of fuel.

 

[raining Pete]

Yes, there is a conversion method to convert burnup from MWd/kgU or GWd/tU into %. First, let's define what burnup is. Burnup is a measure of how much energy has been extracted from a given unit of nuclear fuel. It is typically expressed in units of megawatt days per kilogram of uranium (MWd/kgU) or gigawatt days per ton of uranium (GWd/tU).

To convert burnup into %, we need to use the following formula: % burnup = (burnup in MWd/kgU or GWd/tU / energy per fission in MeV) * 100.

Since we are assuming the fuel is UO2 with ~ 200 MeV per fission, we can plug in this value into the formula. For example, if we have a burnup of 100 MWd/kgU, the conversion would be (% burnup = (100 MWd/kgU / 200 MeV) * 100 = 50%).

Therefore, to convert burnup from MWd/kgU or GWd/tU into %, we just need to divide the burnup value by the energy per fission in MeV and then multiply by 100. Keep in mind that this conversion assumes a constant energy per fission for all fission events, which may not always be the case in real-world scenarios.