Coefficient of friction of box of books

In summary: mg = mg + mv*gmg = mg + mv*gmg = (mg + mv*g) + m(g*v*y)mg = (mg + mv*g) + m(g*v*y)mg = (mg + mv*g) + m(g*v*y)mg = (mg + mv*g)*g + m(g*v*y)mg = (mg + mv*g)*g + m(g*v*y)mg = (mg + mv*g)*g + m(g*v*y)*v
  • #1
willingtolearn
62
0
Problem 1:
A box of books weighting 300 N is shoved cross the floor of an apartment by a force of 400 N exerted downward at an angle of 35.2* below the horizontal. If the coefficient of kinetic friction between box and floor is .57, how long does it take t move the box 4 m, starting from rest ?
-----------------------------
w = 300 N ==> m = 30.6 kg
u (coefficient)= .57
d = 4m
v0= 0

F (f) = u time F (normal)
F (normal) is the same as F (perpendicular)
F (per) = 300 cos 35.2* = 245.1 N
F (f) = .57 time 245.1 = 139.7 N
F = ma
139.7 = 30a --> a = 4.6 m/s2
V(final) = 2ad = 36.8 m/s
From vf = vi + at --? t = 8s
What i did wrong ?



Problem 2:
A box slides down a 30* ramp with an acceleration of 1.2 m/s2. Determine the coefficient of kinetic friction between the box and the ramp.
-------------------------------------------
Can some one give me some hints ?
 
Physics news on Phys.org
  • #2
willingtolearn said:
Problem 1:
A box of books weighting 300 N is shoved cross the floor of an apartment by a force of 400 N exerted downward at an angle of 35.2* below the horizontal. If the coefficient of kinetic friction between box and floor is .57, how long does it take t move the box 4 m, starting from rest ?
-----------------------------
w = 300 N ==> m = 30.6 kg
u (coefficient)= .57
d = 4m
v0= 0
yes.

F (f) = u time F (normal)
F (normal) is the same as F (perpendicular)
good.
F (per) = 300 cos 35.2* = 245.1 N
F (f) = .57 time 245.1 = 139.7 N
not so good. In calculating the normal force, you need to consider the weight of the books and the component of the applied 400N force in the vertical direction, and apply Newton 1.
F = ma
139.7 = 30a --> a = 4.6 m/s2
In addition to the friction force, what other force acts in the x direction? What is the net force in the x direction?
V(final) = 2ad = 36.8 m/s
this equation is wrong it should be v^2=2ad. Or just use d=1/2at^2
 
  • #3
PhanthomJay said:
not so good. In calculating the normal force, you need to consider the weight of the books and the component of the applied 400N force in the vertical direction, and apply Newton 1.
In addition to the friction force, what other force acts in the x direction? What is the net force in the x direction?
this equation is wrong it should be v^2=2ad. Or just use d=1/2at^2
F (parallel) = 172.9 N
Fnet = 400 - 172.9 -> 227.1 N
F = ma --> a = 7.4 m/s2
t = 1.04 s
still wrong ?
 
Last edited:
  • #4
willingtolearn said:
F (parallel) = 172.9 N
Fnet = 400 - 172.9 -> 227.1 N
F = ma --> a = 7.4 m/s2
t = 1.04 s
still wrong ?

In the x direction, ther are 2 forces acting: The x component of the applied 400N force, which is 400cos35.2, and the opposing friction force, which is mu times the normal force. The normal force, using Newton 1, is the book weight plus the vert component of the 400N force. .
 
  • #5
got it
 
  • #6
Problem 2:
A box slides down a 30* ramp with an acceleration of 1.2 m/s2. Determine the coefficient of kinetic friction between the box and the ramp.

Divide the forces up into components perpendicular to the plane (call this y-axis) and parallel to the plane (call this x-axis)...

we already know that the normal force Fn is perpendicular to the plane...

we already know that the frictional force Ff = mu*Fn is parallel to the plane...

Now divide gravity into components parallel and perpendicular to the plane. what are the 2 components of mg...
 

What is the coefficient of friction?

The coefficient of friction is a measure of the amount of friction between two surfaces in contact. It is a dimensionless quantity that represents the ratio of the force required to move one surface over the other to the force holding them together.

Why is the coefficient of friction important?

The coefficient of friction is important because it can help determine the amount of force needed to move an object over a surface. It is also essential in understanding the behavior of objects in motion and designing structures or machines that rely on friction for their operation.

How is the coefficient of friction measured?

The coefficient of friction can be measured by conducting experiments where the force required to move an object over a surface is measured and compared to the weight of the object. The ratio of these two values gives the coefficient of friction.

What factors affect the coefficient of friction?

The coefficient of friction can be affected by various factors such as the nature of the surfaces in contact, the roughness of the surfaces, the amount of force applied, and the presence of any lubricants or contaminants.

What is a high or low coefficient of friction?

A high coefficient of friction indicates that a larger force is required to move an object over a surface, while a low coefficient of friction means that less force is needed. The specific values of a high or low coefficient of friction vary depending on the materials and conditions involved.

Similar threads

  • Introductory Physics Homework Help
Replies
18
Views
1K
  • Introductory Physics Homework Help
Replies
11
Views
2K
  • Introductory Physics Homework Help
Replies
3
Views
3K
  • Introductory Physics Homework Help
Replies
3
Views
778
  • Introductory Physics Homework Help
Replies
10
Views
4K
  • Introductory Physics Homework Help
Replies
1
Views
909
  • Introductory Physics Homework Help
Replies
11
Views
1K
  • Introductory Physics Homework Help
Replies
5
Views
2K
  • Introductory Physics Homework Help
Replies
1
Views
1K
  • Introductory Physics Homework Help
Replies
3
Views
2K
Back
Top