Magnets in Cars-Coils in Roads

  • Thread starter ruko
  • Start date
  • Tags
    Magnets
In summary, magnets in cars passing over coils in roads would definitely generate power. There are a few people who think this would be free power. I don't know how to properly explain why it would NOT be free power. Can someone help?
  • #1
ruko
57
1
Magnets in cars passing over coils in roads would definitely generate power. There are a few people who think this would be free power. I don't know how to properly explain why it would NOT be free power. Can someone help?
 
Last edited:
Physics news on Phys.org
  • #2
ruko said:
Magnets in cars passing over coils in roads would definitely generate power. There are a few people who think this would be free power. I don't know how to properly explain why it would NOT be free power. Can someone help?

The energy transferred to the coils would come from extra gas burned to overcome the extra resistance to motion. You are correct, there is no free energy.
 
  • #3
berkeman said:
The energy transferred to the coils would come from extra gas burned to overcome the extra resistance to motion. You are correct, there is no free energy.

Just to be clear, would this resistance come from the attraction of the car's magnet to the coil? Or is it that the coil is resisting the 'charging' by the car's magnet (it comes from relative motion)? Or both?
 
  • #4
James Leighe said:
Just to be clear, would this resistance come from the attraction of the car's magnet to the coil? Or is it that the coil is resisting the 'charging' by the car's magnet (it comes from relative motion)? Or both?

Just as in a regular rotating generator, the current that is induced in the coil generates a reverse magnetic field that opposes the field that is inducing the current. This makes a resistance to the motion of the exciting magnet. That's why there is resistance to rotation of a rotating generator, when there is a load connected to its output.

http://en.wikipedia.org/wiki/Electric_generator

.
 
  • #5
What if you put them at stop lights or freeway exits or similar places where people are slowing down anyway? It's not free energy, but would it be 'more efficient' energy?
 
  • #6
DavidSnider said:
What if you put them at stop lights or freeway exits or similar places where people are slowing down anyway? It's not free energy, but would it be 'more efficient' energy?

I saw a segment on the BBC a while back where someone had designed a speed bump that "produced" energy, i.e. the energy that would normally be dissipated by breaking the car was somehow turned into electricity when the car drove over it.
I very much doubt it would be commercially viable, but it was a nice idea.

Also, there are already all sorts of techniques for recovering energy from cars that are slowing down, most(all?) hybrids use regenerative breaking which does exactly that.
 
  • #7
DavidSnider said:
What if you put them at stop lights or freeway exits or similar places where people are slowing down anyway? It's not free energy, but would it be 'more efficient' energy?

In addition to f95's comments, remember that adding weight to a car requires burning more fuel. The speedbump idea would be more efficient, though not much fun for the cars.
 
  • #8
Think about electricity as marbles in a tube- you push on the marble on one end, and almost instantly the marble on the other end moves. You could put a match box on the end of the tube and you can still easily push the marble- but it is a little harder to do, but that is work performed.

It is really the same thing, Voltage represents a difference in pressure (charge to be specific)- the pressure of electrons (and protons- but they aint budging, unless your talking about inside a plasma field (like a neon sign)) You have one wire with high pressure (dangerous) and one wire with low pressure (less dangerous and depending on design totally safe) but in reality they are both the same wire- just different ends.

When a magnet passes over say a coil a copper wire- that magnetic field pushes the electrons in the same direction. In the direction it travels becomes the side which is now under higher pressure. In order to make anything under pressure takes some oomph- and that oomph is energy required which will mean more gas is needed to drive the same distance at the same speed.

Then you have to factor in efficiency- a car is 20-30% efficient, it has to be able to operate in all sorts of ways- sometimes you have to hit the gas to get on the highway, sometimes you are backing out of your driveway- and you don't want to wait 2 hours for your car to warm up. A power generation facility is designed to run one way- optimally their engines are not changing rpms- there is no need for transmissions and other energy robbing but vital components for a car which is why they are closer to 80-98% efficient at producing power from fuel.

Also the amount of infrastructure in my opinion would NEVER pay off- by the time the system is rusted and falls apart it will not have produced more energy then it took to construct. Mining ore, refining ore, machining metal takes GREAT deals of energy.
 
  • #9
Thanks to all.
 

1. How do magnets in cars and coils in roads work together?

The magnets in cars and coils in roads work together through electromagnetic induction. As a car with magnets passes over a coil in the road, the magnetic field of the magnets causes a change in the magnetic field of the coil. This change induces an electric current in the coil, which can then be used to power the car or recharge its batteries.

2. What are the benefits of using magnets in cars and coils in roads?

The use of magnets in cars and coils in roads has several benefits. Firstly, it reduces the dependence on fossil fuels and can help reduce air pollution. It also eliminates the need for frequent charging of electric cars, as they can be powered while driving. Additionally, this technology can lead to more efficient use of energy and reduce traffic congestion.

3. Are there any potential drawbacks to using magnets in cars and coils in roads?

One potential drawback is the cost of implementing this technology on a large scale. The construction and maintenance of the coils in roads may also be expensive. There are also concerns about the safety and reliability of this technology, as well as potential interference with other electronic devices.

4. Can magnets in cars and coils in roads be used with any type of vehicle?

Yes, this technology can be used with any type of vehicle as long as it has magnets installed. However, it may be more beneficial for electric and hybrid vehicles, as it can provide a continuous source of power while driving.

5. Is there any ongoing research or development in this field?

Yes, there is ongoing research and development in this field to improve the efficiency and cost-effectiveness of using magnets in cars and coils in roads. There are also efforts to address safety concerns and find ways to implement this technology on a larger scale. Additionally, there are discussions about using this technology for other purposes, such as wireless charging of electric vehicles.

Similar threads

Replies
1
Views
353
Replies
4
Views
948
Replies
8
Views
2K
  • Electromagnetism
Replies
5
Views
1K
  • Electromagnetism
Replies
5
Views
324
  • Electromagnetism
2
Replies
43
Views
1K
Replies
27
Views
1K
  • Electromagnetism
Replies
14
Views
1K
  • Electromagnetism
Replies
12
Views
1K
Replies
5
Views
871
Back
Top