Making A Wind Tunnel

Main Question or Discussion Point

I need to make a wind tunnel of plywood for testing a plate fin heat exchanger . the exhaust from the engine is fed through the Wind tunnel and then to the heat exchanger. the heat exchanger of 60 cm in length and fins of 15cm*15cm are welded over it.the temperature of exhaust is around 500'c.

The diagram of the entire process is given in this link. It a 2MB image file.

Please help me on making the wind tunnel.

Thank You
http://rapidshare.com/files/103778121/wind_tunnel.bmp.html
 
Last edited by a moderator:

Answers and Replies

russ_watters
Mentor
19,016
5,168
You really should consider a better host - not many people are going to be willing to view it there.

In any case, I did view it and I don't really understand what the question is. You just need to build an adapter between the exhaust and the heat exchanger. I wouldn't call it a wind tunnel, though.
 
Last edited:

Related Threads for: Making A Wind Tunnel

Replies
11
Views
1K
  • Last Post
Replies
5
Views
2K
  • Last Post
Replies
7
Views
5K
  • Last Post
Replies
1
Views
636
  • Last Post
Replies
1
Views
2K
  • Last Post
Replies
5
Views
4K
  • Last Post
Replies
13
Views
2K
  • Last Post
Replies
16
Views
9K
Top