RC circuit amp

  • Engineering
  • Thread starter Duckshot
  • Start date
  • #1
Duckshot
1
0
Hi I am struggling to answer this question:

The input coupling circuit of the amplifier shown in the figure consist of an RC network, with R = 1 kW and C = 5mF fed by a sinusoidal voltage source of r.m.s. amplitude of 200 mV. Assuming that the input impedance of the amplifier is, at all frequencies, so much larger than 1 kW that it can be neglected, calculate the output voltage Vo at 10Hz, 100Hz and 1kHz.

fig1.jpg



I would really appreciate any help, or if someone could point me in the right direction.

Thanks in advance
 

Answers and Replies

  • #2
Redbelly98
Staff Emeritus
Science Advisor
Homework Helper
Insights Author
12,134
161
Don't know if you're still working on this, I just saw it.

What are the impedances of the resistor and of the capacitor?
 

Suggested for: RC circuit amp

Engineering RC Op-Amp Circuit
  • Last Post
Replies
1
Views
4K
Engineering RC circuit
  • Last Post
Replies
3
Views
1K
Engineering RC circuit
  • Last Post
Replies
1
Views
2K
Engineering RC circuit problem
  • Last Post
Replies
3
Views
1K
  • Last Post
Replies
1
Views
5K
Engineering RC circuit switch
  • Last Post
Replies
5
Views
1K
Engineering RC circuit voltage
  • Last Post
Replies
5
Views
2K
Engineering RC Circuit + Pulse
  • Last Post
Replies
3
Views
6K
Engineering RC Circuit Problem
  • Last Post
Replies
1
Views
2K
Engineering RC Circuit/Question
  • Last Post
Replies
3
Views
7K
Top