Standing Wave Fundamental Frequency and Particle Vibration

In summary, when two waves with opposite direction of travel are evaluated using the superposition principle, the resulting displacement function is 2A sin (kx) cos(ωt). Natural frequencies of standing waves in the medium or string can be calculated for different node and anti-node configurations, but this is different from the frequency of individual particles in the medium. The frequency of individual particles is determined by the geometry and dimensions of the oscillating system, rather than the particles themselves. The standing wave frequency cannot be compared to the frequency of individual particles in the medium, as the particles do not have frequencies associated with them. Natural frequencies are associated with multiple particles interacting by elastic forces, while the frequency of individual particles is determined by the specific elastic potential
  • #1
Nikhil Rajagopalan
72
5
For a wave A sin ( kx - ωt) and a wave A sin ( kx + ωt) traveling opposite to each other, on evaluating by applying superposition principle , the resultant displacement function is 2A sin ( kx ) cos (ωt) . For different Node Anti-node configurations we calculate natural frequencies of the standing waves in the medium/string. Is this totally different from the frequency of the individual particles in the medium which execute an SHM with a fixed amplitude, calculated out of ω . What is the physical difference of frequency that maybe calculated from ω and the natural frequencies ?
 
Physics news on Phys.org
  • #2
Nikhil Rajagopalan said:
. Is this totally different from the frequency of the individual particles in the medium which execute an SHM
It's the geometry / dimensions of the whole oscillating system that determines the resonance and not the individual particles. The particles are not associated with any particular frequency - they will have a whole range of speeds and collision rates and can be changing direction, individually in a random way due to collisions. They cannot 'know' about the oscillations - they can only move in the direction that the instantaneous pressure is pushing them in bulk. But the temperature in a gas (aka average Energy of particles) can affect the bulk properties of the medium (wave speed).
 
  • Like
Likes Nikhil Rajagopalan
  • #3
The particles themselves don't have any frequency associated. So you cannot say that the standing wave frequency is different from the frequency of the particles. A particle attached to a spring (like in the simple harmonic oscillator) oscillates with a specific frequency. The same particle attached to a different spring oscillates with a different "natural frequency". So the frequency is associated with the particle in a specific elastic potential.

If you have multiple particles interacting by elastic forces there are multiple natural (or normal modes) frequencies associated with the system, like in the waves on a string. So there is nothing to compare. The isolated "particles" don't have frequencies.
 
  • Like
Likes sophiecentaur

1. What is a standing wave?

A standing wave is a type of wave that occurs when two waves with the same frequency and amplitude travel in opposite directions and interfere with each other. This results in a pattern of nodes (points of no displacement) and antinodes (points of maximum displacement) that appear to be standing still.

2. What is the fundamental frequency of a standing wave?

The fundamental frequency of a standing wave is the lowest frequency at which the wave can vibrate and still maintain its standing wave pattern. It is also known as the first harmonic and is equal to half the wavelength of the wave.

3. How is the fundamental frequency related to particle vibration in a standing wave?

The fundamental frequency is directly related to the particle vibration in a standing wave. As the frequency increases, the distance between nodes and antinodes decreases, causing the particles to vibrate at a higher rate. The fundamental frequency is the only frequency at which all particles in the standing wave vibrate in phase with each other.

4. How does the length of the standing wave affect the fundamental frequency?

The length of the standing wave is inversely proportional to the fundamental frequency. This means that as the length of the standing wave decreases, the fundamental frequency increases. This relationship is described by the equation f = nv/2L, where f is the frequency, n is the harmonic number, v is the speed of the wave, and L is the length of the standing wave.

5. What is the relationship between the fundamental frequency and the speed of the wave?

The fundamental frequency is directly proportional to the speed of the wave. This means that as the speed of the wave increases, the fundamental frequency also increases. This relationship is described by the equation f = nv/2L, where f is the frequency, n is the harmonic number, v is the speed of the wave, and L is the length of the standing wave.

Similar threads

Replies
7
Views
1K
  • Electromagnetism
Replies
10
Views
2K
  • Introductory Physics Homework Help
Replies
6
Views
226
Replies
3
Views
1K
  • Introductory Physics Homework Help
Replies
7
Views
870
  • Introductory Physics Homework Help
Replies
5
Views
1K
  • Electromagnetism
Replies
2
Views
2K
  • Thermodynamics
Replies
5
Views
1K
  • Introductory Physics Homework Help
Replies
21
Views
2K
Replies
3
Views
816
Back
Top