The physics of making a snowman

[Charles Link]

Doesn’t he/she need this years clothing style?

I'm using the same clothing,(scarf, cap, and gloves), and eyes and nose (those are empty medicine bottles with the covers removed), and red duct tape that I have for the last couple of years. I suppose I could try to find something different, but I'm not terribly fashion conscious.

 

[Charles Link]

Here are pictures of a snowman I made today, Thursday 11-29-18, in my backyard. I believe this one is the largest snowman I have ever made.

 

[Charles Link]

Here is a current picture on Tuesday 12-4-18 of last Thursday's (11-29-18) snowman. Chicago had plenty of rain on Saturday 12-1-18 and Sunday 12-2-18, along with temperatures as high as 47 degrees, so I covered the snowman with plastic during this time, and he survived. We now have cold weather in the forecast in Chicago for at least a week, so he just might be around for a while. He is still 5'0" tall, but has lost some of his bulk.

 

[jedishrfu]

No doubt on a no water diet. ;-)

 

[Charles Link]

I made one large snowman in February this year that lasted about 3 weeks, whose pictures I did not post, but here is a picture of today's snowman Sunday 4-14-19, which will likely be the last one of the year. This one is about 4'0" tall.

 

[Charles Link]

Note: The above picture is from my backyard in Chicago, Illinois. Let me repeat it here, because we are on a new page. The snowman is 4'0" tall from Sunday 4-14-19.

 

[Charles Link]

I was expecting the snowman of 4-14-19 to be the last one of the season in Chicago, but today 4-27-19, I built another (see photo) that also is 4'0" tall. We usually do not get snow in Chicago in late April. It is even somewhat uncommon in mid-April.

 

[Charles Link]

In a very early snow in Chicago on 10-31-19, we got enough snow to make a 4'0" snowman. Happy Halloween.

 

[newbiegirl]

View attachment 252145In a very early snow in Chicago on 10-31-19, we got enough snow to make a 4'0" snowman. Happy Halloween.

Archimedes got new gloves this season ☃

 

[Charles Link]

Archimedes got new gloves this season ☃

You are very observant. I couldn't find the old pair, (I found them a half hour later), so I put a different (more colorful) pair of gloves on the snowman. ☃☃

 

[Spinnor]

Good snow for a snowball fight is also probably good snow for a snowman or snowwomen.

"Light, powdery snow does not contain a lot of moisture or air, making it difficult to pack into a snowball. For the best snowballs, seek out snow from areas where the ground may be warmer. Wetter snow makes for better snowballs. "

From, https://www.google.com/search?q=wha.....69i57j33.13079j0j8&sourceid=chrome&ie=UTF-8

"Snow comes in five categories: dry (zero percent water), moist (less than 3 percent), wet (3 to 8 percent), very wet (8 to 15 percent) and slush (more than 15 percent). By that scale, moist to wet snow is ideal for snowman building, according to Jordy Hendrikx, a snow scientist at Montana State University. "

From, https://www.google.com/search?q=wha...ome..69i57.22991j1j8&sourceid=chrome&ie=UTF-8

 

[Charles Link]

Good snow for a snowball fight is also probably good snow for a snowman or snowwomen.

"Light, powdery snow does not contain a lot of moisture or air, making it difficult to pack into a snowball. For the best snowballs, seek out snow from areas where the ground may be warmer. Wetter snow makes for better snowballs. "

From, https://www.google.com/search?q=wha.....69i57j33.13079j0j8&sourceid=chrome&ie=UTF-8

"Snow comes in five categories: dry (zero percent water), moist (less than 3 percent), wet (3 to 8 percent), very wet (8 to 15 percent) and slush (more than 15 percent). By that scale, moist to wet snow is ideal for snowman building, according to Jordy Hendrikx, a snow scientist at Montana State University. "

From, https://www.google.com/search?q=wha...ome..69i57.22991j1j8&sourceid=chrome&ie=UTF-8

The less than 3 percent (moist) IMO most likely is difficult to get it to pack. I have found that the snow packs much better when the temperature is above freezing, as opposed to a couple of degrees below. I don't have instrumentation to put a precise number on this, but from looking at the above numbers, I probably like the 8-15% (very wet) category for ease in rolling the balls for a snowman.

 

[Spinnor]

Here is a guide to determine the "wetness" of your next snowman" snow,

From, https://www.the-cryosphere.net/5/405/2011/tc-5-405-2011.pdf

From, https://www.google.com/search?q=how...meAKHbRcB0AQ_AUIDSgA&biw=931&bih=570&dpr=1.38

Slightly wet snow is great for cross country skiing and sledding as well, really wet snow clogs up my snowblower.

 

[Charles Link]

Just one additional comment: In one of the articles that came up in the above links, one of the "experts" said that a ratio of about 5:1 snow to water seems to work the best for snowmen. That would be a very wet snow of about 16%, which I would be in agreement with. The other expert who said a "moist to wet" snow works best was perhaps using the terminology loosely, and was not relating this to the 3% to 8% category.

 

[Spinnor]

Just one additional comment: In one of the articles that came up in the above links, one of the "experts" said that a ratio of about 5:1 snow to water seems to work the best for snowmen. That would be a very wet snow of about 16%, which I would be in agreement with. The other expert who said a "moist to wet" snow works best was perhaps using the terminology loosely, and was not relating this to the 3% to 8% category.

Clearly more research is needed, a research topic that might win you an Ig Nobel prize if it has not already been won by someone?

 

[JT Smith]

Just one additional comment: In one of the articles that came up in the above links, one of the "experts" said that a ratio of about 5:1 snow to water seems to work the best for snowmen.

One expert who has made that claim is none other than Dr. Daniel Snowman.

It's an interesting observation but, as a sometimes snowman or snowball maker, I find it useless in practice. First, measuring water content takes longer than simply trying to form a snowball. Second, there's nothing I can do about it.

 

[Charles Link]

Here is a photo of a 5'0" snowman that I made on Friday 11-15-19. The snow, about 2" of it, was from Monday 11-11-19, but at 27 degrees, it was too cold for packing. The next 3 days were even colder, but on Friday, the temperatures warmed up to about 40 degrees, and the snow from Monday packed superbly. This is a good example of how the snow needs to have sufficient water content to pack for a snowman.

 

[Charles Link]

Here is a 4'9" snowman that I made today, New Year's Day 2020, from snow that fell yesterday, but at 28 degrees, it was too cold to pack. Today it warmed up to 38 degrees, and it got just warm enough for the snow to pack reasonably well. Happy New Year.

 

[jedishrfu]

Way to go @Charles Link ! Happy New Year Mr Snowman!

 

[Charles Link]

Here is a picture of a 5'0" snowman that I made Monday 1-13-20, from snow that fell 1-12-20. It was too cold to pack well when it fell, but it warmed up a little today, (above freezing), and it packed very well.

 

[jedishrfu]

This snowman has a hohum smile like he didn’t like you using stale snow.

 

[Charles Link]

 

[Charles Link]

The above is a picture of a 4'4" snowman that I made on 12-30-20, the first snowman of the season in Chicago. I couldn't get this text with the picture, so I put it in the next post.

 

[Fervent Freyja]

Lucky you! This is the last “snowgirl” I was able to make a few years ago- my area doesn’t get much snow.

I recall wanting to go big, but the warmer temps hadn’t allowed me to pack my base ball as much as I had wanted, so we ended up with with this (probably 2.5’ tall)!

 

[jedishrfu]

We didn't get enough snow yet to make one but folks in Hutto got a passel of the white stuff.

And a snowman from Hutto, Texas, Y'all!

 

[jedishrfu]

Folks were making snowmen on our street but no one knew you had to start with a snowball and roll it around to make a big ball. Instead they just packed the snow together to make it and of course it just didn't look right.

One kid made an angry bird snowman such imagination.

We got 3" of snow in Austin Tx. It started as rain to sleet to snow so it rolled really well stripping all the snow right off of the grass. I was really surprised. I did one roll and gave it to a family building a small snowman for their two year old son.

 

[jedishrfu]

Upping the snowman ante with snow bears from Winnipeg:

https://www.google.com/search?q=snowbears+winipeg

https://images.app.goo.gl/Ug2LAb9mQUV7idCL7

https://www.ctvnews.ca/video?playlistId=1.5285898

 

[rsk]

Some great snowmen here! But it surprises me a bit that I haven't yet seen a snowman dressed in Winter 20-21 style, wearing a face mask.

 

[jedishrfu]

I’ve seen a couple of local snowmen with surgical masks.

 

[Charles Link]

 

[Charles Link]

The above (post 65) is a photo of a 4'3" snowman that I made today, Tuesday 3-16-21, from snow that fell yesterday, but it was too cold to pack. It warmed up above freezing today, about 38 degrees, and the snow packed very easily.

 

[Charles Link]

 

[Charles Link]

The above is a snowman that I made today, Tuesday 12-28-21. It measures 3 feet 10 inches tall. It is the first one of the season here in Chicago.

 

[Charles Link]

 

[Charles Link]

The above snowman is one I assembled today Wednesday February 2. It is the second one of the season and is 3' 10" tall. We had 6" of snow in Chicago today, but at 24 degrees, it was too cold to pack. This one took a little more planning than most of them, and the reader might find the details of interest: The snowballs for the snowman came from snow that was on the ground 2 days ago from a previous snowfall about a week ago. It was 38 degrees two days ago, and it packed very well. Yesterday it was 46 degrees with rain, so I covered the snowballs with plastic, and today, when the temperature was 24 degrees, I stacked them into a snowman. I didn't have any snow that would pack well to cement the layers together, so I used dowel rod to hold the snowballs in place.