Transistor Current Greetings - Variation in AC Signal

In summary, the conversation discusses the common-emitter configuration of a BJT and how the current through the emitter and collector resistor will vary as the input AC signal varies. The base bias of the transistor does not go negative and the base current must always be flowing into the base. The emitter current is equal to the sum of the base and collector currents. The direction of the base current does not change, but its value will vary.
  • #1
amaresh92
163
0
greetings-

suppose a transistor connected with emitter and collector resistor.
when this transistor is given a AC signal, will the current through the emitter and collector resistor will vary as input AC signal varies? variation in AC signal in the sense the direction of flow of current.
thanks
 
Engineering news on Phys.org
  • #2
amaresh92 said:
greetings-

suppose a transistor connected with emitter and collector resistor.
when this transistor is given a AC signal, will the current through the emitter and collector resistor will vary as input AC signal varies? variation in AC signal in the sense the direction of flow of current.
thanks

You are describing the common-emitter configuration of a BJT:

http://en.wikipedia.org/wiki/Common_emitter

And yes, as you vary the base current, that will vary the (amplified) collector & emitter currents. Your base bias does not go negative, however. It varies in positive values to control the collector current.
 
  • #3
amaresh92 said:
greetings-

suppose a transistor connected with emitter and collector resistor.
when this transistor is given a AC signal, will the current through the emitter and collector resistor will vary as input AC signal varies? variation in AC signal in the sense the direction of flow of current.
thanks
I might mention finite current always needs to be flowing Into the base. Its "direction" should not change but its value will vary. Min base current - min collector current : Max base current - max collector current
and emitter current = base current + collector current
Sorry if that's too elementary but I'm not exactly sure what your question means.
 

What is a transistor?

A transistor is a semiconductor device that is used to amplify or switch electronic signals. It is composed of three layers of a material with alternating positive and negative charges, which can control the flow of electricity.

What is current?

Current is the flow of electric charge in a circuit. It is measured in amperes (A) and is represented by the symbol "I".

How does a transistor control current?

A transistor has three terminals: the base, the collector, and the emitter. By applying a small current or voltage to the base terminal, the transistor can control the larger current flowing between the collector and the emitter terminals. This allows the transistor to amplify or switch electronic signals.

What is an AC signal?

An AC (alternating current) signal is a type of electrical signal that constantly changes direction and magnitude. It is commonly used in household electricity and is represented by a sine wave.

How does the variation in AC signal affect transistor current?

The variation in AC signal can affect the amount of current flowing through a transistor. As the AC signal changes, the transistor will amplify or switch the current accordingly, resulting in a varying output current. This allows for the transmission of information or data through the use of transistors in electronic devices.

Similar threads

Replies
5
Views
2K
Replies
80
Views
3K
  • Electrical Engineering
Replies
3
Views
785
  • Electrical Engineering
Replies
9
Views
7K
Replies
68
Views
3K
  • Electrical Engineering
Replies
11
Views
1K
  • Electrical Engineering
Replies
3
Views
1K
  • Electrical Engineering
Replies
5
Views
1K
  • Electrical Engineering
Replies
19
Views
1K
  • Electrical Engineering
Replies
2
Views
1K
Back
Top