Water Flow & Pressure: The Impact of Water Control Mechanisms on Overflow Time"

In summary, the conversation discusses the effect of different rates of water flow on the pressure and overflow time in two containers. One of the containers is designed to prevent overflow, causing the rate of water level increase to decrease with increasing height. The question is whether the higher rate of water flow will cause the water to overflow before reaching the designated height of 14m.
  • #1
AryaUnderfoot
17
0
Water is poured into two containers separately at two different rate. Will the rate of increase of water flow affects the pressure building up? Can the pressure affects the time taken for the water to overflow the container?
( One of the container is designed to avoid overflow, hence the rate of increase of water level decrease with every increasing height?)
 
Engineering news on Phys.org
  • #2
AryaUnderfoot said:
Water is poured into two containers separately at two different rate. Will the rate of increase of water flow affects the pressure building up? Can the pressure affects the time taken for the water to overflow the container?
( One of the container is designed to avoid overflow, hence the rate of increase of water level decrease with every increasing height?)

Welcome to the PF.

Can you post a drawing of the setup? It's a bit difficult to understand your question (at least it is hard for me). :smile:
 
  • #3
If the rate of water flows in is high, the air pressure exerts on the water surface will be higher, then the water will overflow even before it reaches 14m. Is that right?
 

Attachments

  • 11046741_765066723561668_8657130959056366890_n.jpg
    11046741_765066723561668_8657130959056366890_n.jpg
    24.9 KB · Views: 560

1. What is the purpose of a water control mechanism?

A water control mechanism is used to manage the flow and distribution of water in a specific area. It can be used to regulate water levels, prevent flooding, and supply water for various purposes such as irrigation, drinking, and industrial use.

2. How does a water control mechanism work?

The specific workings of a water control mechanism will depend on its design and purpose. However, most water control mechanisms involve a series of gates, valves, pumps, and channels that can be opened or closed to control the flow of water.

3. What are some examples of water control mechanisms?

Some common examples of water control mechanisms include dams, levees, irrigation canals, water treatment plants, and water distribution systems. These can vary in size and complexity depending on the location and purpose of the water control.

4. What are the benefits of using a water control mechanism?

A water control mechanism can provide numerous benefits, including flood control, water conservation, and improved water quality. It can also help regulate water supply for agricultural, industrial, and domestic use, leading to economic and societal benefits.

5. What are the potential risks or drawbacks of using a water control mechanism?

While water control mechanisms can provide many benefits, they can also have potential risks and drawbacks. These may include environmental impacts, such as altering natural water flow and affecting wildlife habitats, as well as the cost and maintenance of the infrastructure.

Similar threads

Replies
50
Views
3K
  • General Engineering
Replies
5
Views
2K
Replies
6
Views
4K
Replies
7
Views
4K
Replies
23
Views
3K
Replies
10
Views
281
  • General Engineering
Replies
4
Views
2K
Replies
5
Views
2K
  • Introductory Physics Homework Help
Replies
8
Views
2K
Replies
31
Views
3K
Back
Top