Recent content by Rajesh Shirsagar

They are by and large roused in some design by genuine issues, yet frequently are rearranged with the goal that they can be explained all the more effectively to outline the point being educated.

Mechanical engineers working in transmission field would often have to decide upon kind of gears they have to use. Although this task has become a matter of selection of gear based on standards, it is also important to know what goes behind this. In this video tutorial you will learn how to...

One-piece cranks are mainly found on older American-made bicycles, and children's bicycles made for the U.S. market. Most one-piece cranks use a single metal forging as left crank, right crank and bottom bracket axle. Bicycle bottom bracket (crank hanger) shells fall, in general, into two...

Hi i have a question i was looking at a 3 phase star/delta set up and notices the overload was lower than expected it was a 37kw motor which is 66 amps to my calculations but overload was 38 i think roughly. I looked on the motor and found at 50hz 660v at star gave the same amps as what the...

Standard rim sizes incorporate 5.5 inches for P195/75R15 tires, 6 inches for P215/75R15 tires, 6.5 inches for P235/75R15 tires, 7 inches for P225/50R15 tires and 7.5 inches for P225/45R17 tires. The measuring rim width of a tire increments by .5-creep augments in extent to increments in the tire...

Stream rate directly affects bead estimate. An expansion in stream rate will build the bead measure; comparatively, an abatement in stream rate will diminish bead estimate. Case: A 150 gpm empty cone spout at 10 psi has a bigger bead than a 100 gpm empty cone at 10 psi. Likewise, a 50 gpm full...

At the point when a key is utilized as a part of transmitting torque from a pole to a rotor or center, the accompanying two sorts of strengths follow up on the key : ... (b) Forces (F) because of the torque transmitted by the pole. These strengths produce shearing and compressive (or pounding)...

http://sailing.jpg We're taking a gander at the vessel from the top. We have our pontoon in blue, heading off to one side. The wind is originating from the top. The sail is calculated 45 degrees. In case you're remaining on the watercraft, the wind is "abeam"; that is, straightforwardly from...

The suspension of an auto structures the basic interface between the distinctive components that work together to deliver its execution. Suspension is the thing that outfits the force of the force unit, the downforce made by the wings and the grasp of the tires, and permits every one of them to...

Generally U.S. makers rate their turbines by the measure of force they can securely create at a specific wind speed, for the most part picked between 24 mph or 10.5 m/s and 36 mph or 16 m/s. The accompanying recipe represents elements that are imperative to the execution of a wind turbine...

the simplest approach to enhance a vehicle's mileage is to make it littler and lighter and give it a littler motor. In any case, we need 400-hp sports autos and seven-traveler SUVs and 5,000-pound-limit tow vehicles — and we need great gas mileage, as well.

ya I know that but are there any useful thing or information can you share?

Is there any importance of mechanical testing ? and what are the types of mechanical testing?