Nice coder
Feb14-04, 11:43 PM
First off; get the fuel tank, get the fuel supply lines and attach to ionisation chamber.
Ionisation chamber- get a small metal semicircular dish, and weld in americium isotops (to make it ionise the gas)
Put in some small holes for the fuel supply lines.
Heating chamber-
This is a larger cylingrical chamber- meshed on both sides (cover mesh with magnet wire) with magnatrons in the middle (on the sides, aiming in the middle, but missing each other).
Put current on both sides of the mesh, and place a temperature controlled trigger- see later
exhaust chamber-
basically a coil gun, to fire the ionised fuel out the back of the masimar thruster.
Cycle goes like
const ctemp = 200
const wamo = 100
do while true
intake_timer.starttimer
Do until intake.timeleft <= 0
addmorefuel
loop
intake_timer.stoptimer
intake_timer.resettimer
Do until temp >= ctemp
temp = findtemp()
wait 1
loop
fireoutput()
wait wamo
loop
(in VBcode ofcource)
What do you think of this?
Please point out anything i did wrong/did not do.
de Nice codre
Ionisation chamber- get a small metal semicircular dish, and weld in americium isotops (to make it ionise the gas)
Put in some small holes for the fuel supply lines.
Heating chamber-
This is a larger cylingrical chamber- meshed on both sides (cover mesh with magnet wire) with magnatrons in the middle (on the sides, aiming in the middle, but missing each other).
Put current on both sides of the mesh, and place a temperature controlled trigger- see later
exhaust chamber-
basically a coil gun, to fire the ionised fuel out the back of the masimar thruster.
Cycle goes like
const ctemp = 200
const wamo = 100
do while true
intake_timer.starttimer
Do until intake.timeleft <= 0
addmorefuel
loop
intake_timer.stoptimer
intake_timer.resettimer
Do until temp >= ctemp
temp = findtemp()
wait 1
loop
fireoutput()
wait wamo
loop
(in VBcode ofcource)
What do you think of this?
Please point out anything i did wrong/did not do.
de Nice codre