How Is Spring Compression Calculated When a Mass Is Dropped on It?

Click For Summary
SUMMARY

The discussion focuses on calculating spring compression and rebound when a 300g mass is dropped from a height of 40cm onto a vertical spring with a spring constant of 200N/m. The spring compresses by 0.124m upon impact, while the maximum stretch during rebound is calculated to be 0.095m. The calculations utilize the conservation of energy principle, equating the potential energy of the spring and gravitational potential energy of the mass. The final formula derived for maximum stretch is x = √(2mgh/k).

PREREQUISITES
  • Understanding of potential energy and kinetic energy concepts
  • Familiarity with Hooke's Law and spring constants
  • Basic knowledge of harmonic motion and oscillation
  • Proficiency in algebraic manipulation and solving equations
NEXT STEPS
  • Study the principles of conservation of energy in mechanical systems
  • Learn about harmonic oscillators and their equations of motion
  • Explore advanced applications of Hooke's Law in real-world scenarios
  • Investigate the effects of damping on oscillatory motion
USEFUL FOR

Physics students, mechanical engineers, and anyone interested in understanding the dynamics of spring systems and energy conservation principles.

John O' Meara
Messages
325
Reaction score
0
Suppose a 300g mass is dropped from a height of 40cm onto a vertical spring with spring constant 200N/m (having a light platform on top) and sticks to the platform (a) How far will the spring compress? (b) How far will the spring be stretched as the mass and spring rebound? use S.I. units.
I can do part (a) ans = .124m. For part (b) I cannot get right answer =.095m

Us at the bottom = Ug at end

where: Us = potential energy of the spring
Ug = potential energy of gravity

this gives:

.5kx^2 = mgx
=> .5kx = mg
= wrong result
what am I missing,
Thanks & regards
 
Physics news on Phys.org
If you have done part a) correctly, you know the lowest point of the motion of the mass attached to the spring. If you find the equilibrium point, you can treat the rest of the problem as a harmonic oscillator with an initial displacement starting with zero velocity.
 


In order to solve for the distance that the spring will be stretched in part (b), you need to consider the conservation of energy in the system. When the mass is dropped onto the spring, it will compress the spring and gain potential energy. This potential energy is then converted into kinetic energy as the mass and spring rebound, and eventually back into potential energy as the mass reaches its maximum height again.

So, in order to solve for the distance the spring will be stretched, you need to equate the initial potential energy gained by compressing the spring to the final potential energy gained when the mass reaches its maximum height.

Initial potential energy: Us = 0.5kx^2 (where x is the distance the spring is compressed)

Final potential energy: Ug = mgh (where h is the maximum height reached by the mass)

Since energy is conserved, we can set these two equations equal to each other:

0.5kx^2 = mgh

Solving for x, we get:

x = √(2mgh/k)

Plugging in the values given in the question, we get:

x = √(2*0.3*9.8*0.4/200) = 0.095m

Therefore, the spring will be stretched by 0.095m as the mass and spring rebound. It is important to note that this is the maximum distance the spring will stretch, as it will gradually decrease as the mass and spring oscillate.
 

Similar threads

Replies
17
Views
3K
  • · Replies 58 ·
2
Replies
58
Views
4K
  • · Replies 14 ·
Replies
14
Views
2K
Replies
3
Views
2K
Replies
9
Views
2K
Replies
8
Views
6K
  • · Replies 3 ·
Replies
3
Views
3K
Replies
4
Views
2K
  • · Replies 15 ·
Replies
15
Views
2K
Replies
2
Views
2K