What is the maximum upward acceleration of the ball?

Click For Summary
SUMMARY

The discussion focuses on solving three physics problems related to motion and acceleration. The first problem involves calculating the distance from a cable car to a dog, using the equations of motion under constant acceleration. The second problem requires determining the deceleration of a child falling from a bed onto different surfaces, while the third problem asks for the maximum upward acceleration of a rubber ball after it bounces. Key equations mentioned include v^2 = v_0^2 + 2a\Delta x and \Delta x = v_0t + \frac{1}{2}at^2.

PREREQUISITES
  • Understanding of kinematics and equations of motion
  • Familiarity with concepts of acceleration and deceleration
  • Knowledge of gravitational effects on falling objects
  • Ability to manipulate algebraic equations for problem-solving
NEXT STEPS
  • Study the derivation and application of kinematic equations
  • Learn about the concepts of constant acceleration and free fall
  • Explore the physics of elastic collisions and energy conservation
  • Practice solving real-world problems involving motion and forces
USEFUL FOR

Students studying physics, particularly those focusing on mechanics and motion, as well as educators looking for problem-solving strategies in kinematics.

Effitol840
Messages
16
Reaction score
0
Alright I'm having trouble with 3 of my 10 problems I have for homework. I do calculations and everything but I always seem to come up with the wrong answer. If anyone can help me out that wold be great. The problems are as follows:

1. A certain cable car is San Francisco can stop in 10 s when traveling at maximum speed. On one occasion, the driver sees a dog a distance d m in front of the car and slams on the brakes instantly. The car reaches the dog 8.6 s later, and the dog jumps off the track just in time. If the car travels 4.5 m beyond the position of the dog before coming to a stop, how far was the car from the dog?

2. Suppose a small child rolls off a bed that is 0.44 m above the floor. If the floor is hardwood, the child's head is brought to rest in approximately 1.9 mm. If the floor is carpeted, this stopping distance is increased to about 1.0 cm. Calculate the magnitude and duration of the deceleration in both cases, to determine the risk of injury. Assume that the child remains horizontal during the fall to the floor. Note that a more complicated fall could result in a head velocity greater or less than the speed you calculate.

3. A hard rubber ball, released at chest height (1.50 m), falls to the pavement and bounces back to nearly the same height. When it is in contact with the pavement, the lower side of the ball is temporarily flattened. Before this dent in the ball pops out, suppose that its maximum depth is 1.10 centimeter. What is the maximum upward acceleration of the ball?

The following equations are supposed to be helpful with all of these problems:

[tex]v[/tex]=velocity [tex]v_{0}[/tex]=initial velocity [tex]\Delta x[/tex]=change in distance [tex]a[/tex]=accelertion
[tex]t[/tex]=time


[tex]vt=\Delta x[/tex]
[tex]v=v_{0}+at[/tex]
[tex]v^2=v_{0}^2+2a\Delta x[/tex]
[tex]\Delta x=v_{0}t+\frac{1}{2}at^2[/tex]

If anyone can help me with how to get started with these the correct way that would be great. Thanks.
 
Last edited:
Physics news on Phys.org
You're supposed to tell us what you've already tried,
and how you're thinking about each problem
(see sticky link at very top of the college HW section).

1. you should presume constant acceleration, so
at the dog the trolley has speed 1.4/10 of v_max.
The average speed after the dog was ? of v_max ;
you know how far it travels in 1.4 sec at this speed.
The average speed before the dog was ?? v_max ;

in (2), you know 2ax before hitting the floor;
so you figure out v^2 before the floor; you're given x's!

in (3), again you're given x that achieves v_f = 0.
just plug it in!
Don't worry much about it - few students understand
the v^2 formula at first ... this is okay I suppose,
since it doesn't really fit in with Newton's view of motion.
After your first exam you'll see it in a new guise,
(KE) where it will make perfect sense, fitting in
with Leibnitz' and Hamilton's approach to dynamics.
 
Sorry about not including information with the problems. I've tried way too many things to write them down. I understand the concept of using and re-using and contorting the equations as to get the answer that I need, I guess I really don't know where I go wrong.

1) With the first problem I figured that the acceleration was constant and that since it is constant it would have the same slope all the way through. I got -1.15 [tex]m/s^2[/tex] from using the equation [tex]a=\frac{v^2-v_0^2}{2\Delta x}[/tex] which I got from one of my original equations. Thats where I get lost. I think its because that's not really the accelleration. I used v from finding it between the end of the line between 8.6s and 10s. So wrong or right I'm still having trouble with the rest of the problem.

2 & 3) As for these 2 problems I have no clue where to start, partially because I really can't understand what the question is asking.

So I guess my real question is how to start 2 and 3 and also what to do to finish 1.

-Effitol840
 
Last edited:

Similar threads

  • · Replies 6 ·
Replies
6
Views
2K
  • · Replies 38 ·
2
Replies
38
Views
5K
  • · Replies 26 ·
Replies
26
Views
4K
Replies
12
Views
2K
Replies
5
Views
2K
  • · Replies 5 ·
Replies
5
Views
2K
  • · Replies 4 ·
Replies
4
Views
3K
  • · Replies 8 ·
Replies
8
Views
4K
  • · Replies 14 ·
Replies
14
Views
4K
  • · Replies 33 ·
2
Replies
33
Views
2K