Register to reply

How to measure a capacitance of an isolated object?

by Artlav
Tags: capacitance, isolated, measure, object
Share this thread:
Artlav
#1
Nov12-12, 04:10 PM
P: 145
How can you measure a capacitance of an isolated object, like a conductive sphere or a coil?

Can it be done using a typical RLC meter?
I've tried touching only one end of the probe to the object in question, and that seems to give sporadic readings, but within the order of magnitude of the theoretical expectation.

How to do it reliably, if there is a way?
Phys.Org News Partner Engineering news on Phys.org
Student develops filter for clean water around the world
Developing the next evolution in underwater communication
Compact vibration harvester power supply with highest efficiency opens door to "fix-and-forget" sensor nodes
berkeman
#2
Nov12-12, 04:46 PM
Mentor
berkeman's Avatar
P: 40,649
Quote Quote by Artlav View Post
How can you measure a capacitance of an isolated object, like a conductive sphere or a coil?

Can it be done using a typical RLC meter?
I've tried touching only one end of the probe to the object in question, and that seems to give sporadic readings, but within the order of magnitude of the theoretical expectation.

How to do it reliably, if there is a way?
By definition, capacitance is between two objects or surfaces. You need to measure the capacitance of your "isolated" object with respect to something.
cabraham
#3
Nov15-12, 11:58 AM
P: 1,035
I believe that the capacitance of a single object is measured wrt a sphere of large radius approaching infinite. E.g. the capacitance of the earth is around 710 uf, IIRC from memory. The large sphere enclosing the object is 1 electrode, with the object being the other. Taking the limit as the radius of the sphere approaches infinite gives the capacitance of the object. I believe Halliday & Resnick physics texts have illustrative examples of this.

Did I help?

Claude

tiny-tim
#4
Nov15-12, 12:36 PM
Sci Advisor
HW Helper
Thanks
tiny-tim's Avatar
P: 26,160
How to measure a capacitance of an isolated object?

hi claude!

but how do you measure it?
cabraham
#5
Nov15-12, 02:07 PM
P: 1,035
Quote Quote by tiny-tim View Post
hi claude!

but how do you measure it?
I'm not sure as to how it is measured. Capacitance of a single object is valid theoretically, but I'm not sure about it being a measurable quantity. I would say a good approximation is to enclose said object inside a sphere whose radius is large compared with the object dimensions, then measure capacitance between object & sphere. That should get you in the ball park. Of course as the sphere radius increases, the measurement gets more accurate, eventually converging. Maybe tonight I'll look this subject up. I have several good reference texts. Off the cuff, that would be my approach. Comments welcome.

Claude


Register to reply

Related Discussions
How to measure capacitance of capacitor using these materials only? Introductory Physics Homework 12
How to measure the Capacitance of this circuit Introductory Physics Homework 13
Methods to accuractly measure capacitance Electrical Engineering 3
How to measure parasitic capacitance of inductor Electrical Engineering 9