Baluncore's latest activity

Yes. The conversion from the S-parameter sweep to time, assumes the step occurs at time = 0. If the data canot fit such an assumption...

You missed my point. "The human brain can reconcile the unreconcilable". E.L. Doctorow.

Your observation may seem obvious, but I do not trust analogies. There needs to be some parallel independent confirmation.

This is the problem, the human mind cannot be trusted to correctly analyse a complex mechanical system, we need a mathematical or...

With unlimited resources, one billion housecats, would require something like 100 million houses and carers. That would solve the...

You need to be more specific about the type of ripples you are considering and how they are generated. Ripples are just small waves, and...

@Nick09 Plummer blocks are used to support heavier industrial loads than pillow blocks. You have specified square pillow blocks, which...

@rajava007 Can you please check that when you turn the input on your model, the output is locked to turn at the same rate.

T I thought the OP built the pictured model to gain experience and demonstrate that was not the case. Your kitty corner analysis is...

I do not believe that your assumption is the case. Consider what happens when they do not rotate at the same rate. given input and...

@Nick09 The bearings you have referenced are not specified to be self-aligning. Self-aligning ball bearings have a spherical outer...

RF instruments are generally manufactured to have an input impedance of 50 ohms, so they can be connected to other RF modules through...

Each "bounce" is a scattering event that splits the energy two ways, in proportion to the transmission and reflection coefficient at...

Roller chain sprockets have a limit of about 12 teeth. Below 12, the sprocket begins to sound clunky, and wears rapidly.

@Nick09 You set the working height by pushing a pin through one hole in the black box, that passes through one of many holes, (spaced...