Baluncore's latest activity

With TDR of any form, everything beyond the second step or kick, becomes indeterminate pinball insanity, in a hall of mirrors.

The helix measures the hypotenuse of a triangular wedge with a height of the thread diameter and a base of the (shaft + thread...

There are two effects, the length of a helix turn, which is of minor importance on big diameter shafts with small threads, and the...

If you can hear a buzz when a motor runs on a VFD, then that vibration may chafe the field coil insulation. The buzz is the sound of the...

Snubbers in this case would be RC networks that make the output look like a low resistance at high frequencies. That will attenuate the...

Not at the motor terminals, but at the inverter output. The voltage switching outputs need to see an inductive load. Wind three...

What is the approximate diameter of the shaft? 1mm, 10mm or 100mm, it makes a big difference. Maybe use an AF specified spanner/wrench...

Maybe when it gets brighter it will be listed here: https://www.heavens-above.com/Asteroids.aspx

I would start here: https://astro.vanbuitenen.nl/neo/1997%20NC1 https://newton.spacedys.com/neodys/index.php?pc=1.1.3.0&n=152637

I expect the first significant lunar power will be required by the robots to install and operate this radio astronomy project. The...

Yet, without our messing with it, it is the Sun that provides that service.

At the same time, it may not actually be necessary to go to the Moon. I am including concepts at this stage, not trying to rule them...

The biggest advantage of lunar satellites would be the lack of an atmosphere, so the orbit could be very low. The orbital period could...

1/12 scale is the standard and most common scale for models and traditional dolls houses. In the "one-inch scale", 1 inch in the...

Yes, but not circling the lunar equator. Lunar libration of about 10° would require the cable cover 190° longitude of the 80° line of...