View Full Version : 2d Kinematics: rocket fired up, engine dies...
blumatrix
Sep20-06, 09:21 AM
?: A rocket is fired up at 5 m/s^2. After a certain time, the engine fails and the rocket goes into freefall. It hits the ground 12 seconds after engine failing. Find V(final) and height that the rocket reaches.
the the way down...
Vf = Vi - at
set Vf = 0 b/c when it hits the ground, V = 0
Vi = 9.8(12)
Vi = 117.6 m/s
so plugging this back into the trip up...
Vf = Vi - at
Vf = 117.6 m/s
Vi = 0 b/c it starts at 0 before fired.
117.6 m/s = - (5 m/s^2)t
t = 23.52 sec
i hope this is right so far... so how do i find V(final) and the height using this? the rocket doesn't stop when the engine dies. it continues up for a little bit before starting the freefall...
thx guys.
?: A rocket is fired up at 5 m/s^2. After a certain time, the engine fails and the rocket goes into freefall. It hits the ground 12 seconds after engine failing. Find V(final) and height that the rocket reaches.
the the way down...
Vf = Vi - at
set Vf = 0 b/c when it hits the ground, V = 0
Vi = 9.8(12)
Vi = 117.6 m/s
so plugging this back into the trip up...
Vf = Vi - at
Vf = 117.6 m/s
Vi = 0 b/c it starts at 0 before fired.
117.6 m/s = - (5 m/s^2)t
t = 23.52 sec
i hope this is right so far... so how do i find V(final) and the height using this? the rocket doesn't stop when the engine dies. it continues up for a little bit before starting the freefall...
thx guys.
Did you perhaps mean 'A rocket is fired up at 5 m/s' ?
Vi = 0 b/c it starts at 0 before fired. -> What exactly did you mean by that? The initial velocity can not equal zero.
?: A rocket is fired up at 5 m/s^2. After a certain time, the engine fails and the rocket goes into freefall. It hits the ground 12 seconds after engine failing. Find V(final) and height that the rocket reaches.
the the way down...
Vf = Vi - at
set Vf = 0 b/c when it hits the ground, V = 0
Vi = 9.8(12)
Vi = 117.6 m/s
so plugging this back into the trip up...
Vf = Vi - at
Vf = 117.6 m/s
Vi = 0 b/c it starts at 0 before fired.
117.6 m/s = - (5 m/s^2)t
t = 23.52 sec
i hope this is right so far... so how do i find V(final) and the height using this? the rocket doesn't stop when the engine dies. it continues up for a little bit before starting the freefall...
thx guys.
The heigth at any instant t can be calculated by:
h = h_0 + v_0\cdott + \frac{1}{2}\cdota\cdott^2
The maximum height is reached when V = 0.
From 0 to 23.52 seconds, a = 5 ms^{-2}
After that time a = -g = -9.8 ms^{-2}
The heigth at any instant t can be calculated by:
h = h_0 + v_0\cdott + \frac{1}{2}\cdota\cdott^2
The maximum height is reached when V = 0.
From 0 to 23.52 seconds, a = 5 ms^{-2}
After that time a = -g = -9.8 ms^{-2}
That would be the height at t = 1, not at any instant t.
blumatrix
Sep20-06, 12:18 PM
initial velocity can be 0 if the object is not in motion, right?
and 5 m/s^2 is the acceleration of the rocket.
blumatrix
Sep20-06, 12:32 PM
so velocity will be 0 at the peak after the engine dies...
setting V = 0, and using Y(final) = Yi + Vi(t) + 1/2at^2
Yf = 0 + 0 + 1/2(5)(23.52^2)
Yf = 1382.98m
is that right?
so velocity will be 0 at the peak after the engine dies...
setting V = 0, and using Y(final) = Yi + Vi(t) + 1/2at^2
Yf = 0 + 0 + 1/2(5)(23.52^2)
Yf = 1382.98m
is that right?
No, I used wrongly the value 23.52 seconds you calculated.
The value of a is 5 m/s^2 from t = 0 until an unknown time t = t_1, when the velocity will reach a maximum value V_f
We know that after some time t_f = t_1 + t_2 the velocity will be zero.
Then, the rocket will fall, accelerated by gravity, and after a time t_3, will hit the ground.
We know that t_2 + t_3 = 12 s
You have 4 unknowns: t_1, t_2, t_3, V_f and 3 equations of movement: from 0 to t_1, from t_1 to t_f = t_1 + t_2 and from that time to t_f + t_3 and an equation of time: t_2 + t_3 = 12 s.
That would be the height at t = 1, not at any instant t.
I don't know what happened with my LaTex equation. It should read:
h = h_0 + V_0t + \frac{1}{2}at^2
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.