PDA

View Full Version : Simple problem on tension and force


k1point618
Aug30-08, 05:29 PM
1. The problem statement, all variables and given/known data
Ropes 3m and 5m in length are fastened to an object that is suspended over a cieling. the object has a mass of 5kg. the ropes, fastened at different heights, make angles of 52 degree and 40 degree with the horizontal. Find the tension in each wire, and the magnitude of each tention.


2. Relevant equations



3. The attempt at a solution
I kno that the tension on one rope, A and the tension on the other rope, B equal to the mass times gravity.
so AT+BT = mg
and i want to find the a equation for AT and BT

Just wondering, since i kno the angle and length of the rope, i know the verticle component of the rope. But then i don't kno where to go after that

jaseh86
Aug31-08, 06:14 AM
What you need to do is draw a force diagram and write down all the horizontal and vertical components of tension as a result of the mass.

Next, you need to use Newton's second Law and find the net force in both horizontal and vertical directions.

Just remember that net force (vector sum of components) = ma, and if the object is not moving, then the net force is zero.

tiny-tim
Aug31-08, 08:57 AM
Hi k1point618! :smile:
so AT+BT = mg

No, that's wrong … that only works if both ropes are vertical.

As jaseh86 says, you must treat the horizontal and vertical components separately.

The vertical ones will add to mg, and the horizontal ones to … ? :smile:

k1point618
Aug31-08, 11:14 AM
Horizontal adds to Zero!

Well, then i have
ATsin52 + BTsin40 = mg, and also


ATcos52 + BTcos40 = 0 ?

tiny-tim
Aug31-08, 11:28 AM
Horizontal adds to Zero!

Well, then i have
ATsin52 + BTsin40 = mg, and also


ATcos52 + BTcos40 = 0 ?

Yes! :smile:

k1point618
Aug31-08, 11:29 AM
So i was wondering, why does the problem give the length of the ropes? and how does the high difference of the cieling affects the problem?

tiny-tim
Aug31-08, 11:43 AM
So i was wondering, why does the problem give the length of the ropes? and how does the high difference of the cieling affects the problem?
Ropes 3m and 5m in length are fastened to an object that is suspended over a cieling. the object has a mass of 5kg. the ropes, fastened at different heights, make angles of 52 degree and 40 degree with the horizontal. Find the tension in each wire, and the magnitude of each tention.

hmm … it's a weird question, because you suspend things under a ceiling, not over it. :confused:

Are you sure you have given us the full correct question?

k1point618
Aug31-08, 11:52 AM
Sorry, Over a ceiling, but the ropes are fastened at different heights.

tiny-tim
Aug31-08, 12:01 PM
So i was wondering, why does the problem give the length of the ropes? and how does the high difference of the cieling affects the problem?
Sorry, Over a ceiling, but the ropes are fastened at different heights.

Then I've no idea why they give you that information. :redface:

k1point618
Aug31-08, 12:03 PM
so the different hieghts of the ceiling does not matter to the problem?

tiny-tim
Aug31-08, 12:10 PM
so the different hieghts of the ceiling does not matter to the problem?

No!!

k1point618
Aug31-08, 12:13 PM
K, THANK YOU!!:smile: