View Full Version : Uniform Field
Moderation Note: Split from the original thread, which can be found here (http://www.physicsforums.com/showthread.php?p=680746#post680746)
.
Example: you have a uniform gravity field of one g. (one that does not decrease in strength with height. You have two clocks of equal mass sitting at different heights in that field. The two clocks will have different gravitational potentials even though they both experience exactly 1g, and according to GR, the one that is above the other will run faster.
Thus a clock sitting at the center of the Earth is not at the same potential as one in space, even though they experience the same gravitational force locally.
A uniform field does not have potential difference:smile:
A uniform field does not have potential difference:smile:
Really?
It doesn't. Since the force everywhere is the same
Vanadium 50
Aug29-09, 01:30 PM
And force is the rate of change of potential.
No Since the work done in bringing a unit mass from infinity to any point would be infinite, there is no potential difference
Vanadium 50
Aug29-09, 02:23 PM
If the force is constant (and non-zero) and the potential is the rate of change of force, the potential cannot be constant.
No Since the work done in bringing a unit mass from infinity to any point would be infinite
That's simply not true.
Intuition works
I wouldn't trust it. It's leading you astray.
If the force is constant (and non-zero) and the potential is the rate of change of force, the potential cannot be constant.The rate of change of potential is force:smile:
But not here
[qoute]
That's simply not true.[/quote]Why not true?The definition of potntial is the work done to bring a unit mass from infinity to a point, and is infinite here since the force is constant all over.In the classical case, force at infinity is zero
I wouldn't trust it. It's leading you astray.
Ah, you're too busy. I can see three in a line
Why not true?The definition of potntial is the work done to bring a unit mass from infinity to a point, and is infinite here since the force is constant all over.In the classical case, force at infinity is zero
The potential difference between any two points will be the work done to move a unit mass between those two points. (In some cases it makes sense to define the potential at infinity equal to zero, but not if the field is everywhere uniform.) Clearly the potential varies along the line of the force.
The potential difference between any two points will be the work done to move a unit mass between those two points. True, but here the potential at every point in the field is infinite, so there's no difference
Vanadium 50
Aug30-09, 02:35 AM
This is just plain wrong. You can't define the potential at one point to be infinity, then calculate that at another point it's also infinity, so the difference between them is zero. Apart from not being the way to solve the problem, this is mathematically incorrect.
A constant field has a potential growing linearly with distance.
It is mathematically incorrect, the answer is actually uncertain.
I made use of the fact that since everywhere in the field the force on a unit mass is the same, the potential everywhere is the same too, but this does not go well with the math
There is no imbalance in this field, and hence there should be no potential difference.
But this is not real, and hence the answer is not real
I made use of the fact that since everywhere in the field the force on a unit mass is the same, the potential everywhere is the same too, but this does not go well with the math
That "fact" is just plain wrong. Since the force = -dU/dx, the potential cannot be the same everywhere.
Hootenanny
Aug30-09, 07:12 AM
I haven't read this thread in it's entirety, but I would like to comment on your last post:
I made use of the fact that since everywhere in the field the force on a unit mass is the same, the potential everywhere is the same too, but this does not go well with the math
As you say, this does not "go with the math" and is therefore incorrect! If there force on a unit mass is the same everywhere, that doesn't mean that potential is the same! In one dimension, the force is defined thus,
F = -\frac{dV}{dx}
We assume that the force is constant,
\frac{dV}{dx} = \text{const}
The potential is then (denoting the constant c1),
V = c_1x + c_2
Hence, the potential is not the same everywhere!
EDIT: Doc Al beat me to it :frown:
That "fact" is just plain wrong. Since the force = -dU/dx, the potential cannot be the same everywhere.
Vanadium said that a lot earlier. And I replied "the potential at a point is the work done to bring a unit mass from infinity to that point and thus the potential everywhere in this field
is infinite"
Read my edited previous post.
There is no real answer to this because the situation itself is not real
Hootenanny
Aug30-09, 07:30 AM
vin300 do you or do you not agree that the definition of force is the negative gradient of the potential? Please answer this question directly.
There is no real answer to this because the situation itself is not realExactly the problem. There is no such place as "at infinity", so trying to calculate the potential "at infinity" is where your logic goes wrong. You can't treat infinity like a real number and try to do maths with it. Think about what's really happening, without bringing infinity into it, and you should be able to make sense of it.
When we say "it takes an infinite amount of work to move to infinity" you can't take that literally. It's a shorthand for saying, "the further you go, the more work is required, without any upper limit".
Don't forget that you can always add a constant to a potential, you don't have to evaluate it "at infinity" to decide what it is elsewhere.
vin300 do you or do you not agree that the definition of force is the negative gradient of the potential? Please answer this question directly.
If you have read all my posts,:
Yes, I agree the force is the negative gradient of potential, this is a fact
Here there is a fixed force with an uncertain difference of potential, which is what makes the thing unreal
Hootenanny
Aug30-09, 07:48 AM
If you have read all my posts,:
Yes, I agree the force is the negative gradient of potential, this is a fact
Good, I'm glad we can agree on something.
Here there is a fixed force without a difference of potential, which is not real
This is where your error lies. If there is a constant (non-zero) force, then there must be a potential field that is a function of position. Please, disregard all your 'intuition' and simply follow the mathematics.
Now, concerning the mathematics, do you disagree with anything that I wrote in this (http://www.physicsforums.com/showpost.php?p=2326940&postcount=46) post?
If you have read all my posts,:
Yes, I agree the force is the negative gradient of potential, this is a fact
OK.
Here there is a fixed force without a difference of potential, which is not real
This contradicts the previous sentence. (You are hung up on defining potential as work done from infinity. That certainly doesn't apply here.)
Ok Now here I prove that the math you use for this problem is wrong
The definition of potential at a point that I already wrote twice is true.From that, you derive the formula of potential you used hitherto this way:
Integrate -(GM/r^2)dr with a lower limit of infinity and upper limit of r
But here, the force is independent of distance
Integrate -kGMdr with a lower limit of infinity and upper limit of r(where k=constant)
P=infinite, for any value of r
If you use this infinite potential to determine the PD you get an unreal answer
That because the situation is unreal
The beauty of it
Hootenanny
Aug30-09, 09:14 AM
Ok Now here I prove that the math you use for this problem is wrong
The definition of potential at a point that I already wrote twice is true.From that, you derive the formula of potential you used hitherto this way:
Integrate -(GM/r^2)dr with a lower limit of infinity and upper limit of r
But here, the force is independent of distance
Integrate -kGMdr with a lower limit of infinity and upper limit of r(where k=constant)
P=infinite, for any value of r
If you use this infinite potential to determine the PD you get an unreal answer
That because the situation is unreal
The beauty of it
Why is [negative] infinity an unreal answer here? Surely one would expect it to be infinite?
Your second integrand is equivalent to a constant force acting on an object. Now, suppose that object is moved through an infinite distance whilst being acted upon by a constant force. Surely it make sense that this would take an infinite amount of energy?
Or do you disagree?
Now, suppose that object is moved through an infinite distance whilst being acted upon by a constant force. Surely it make sense that this would take an infinite amount of energy?
Exactly, but what is unreal is potential difference between two points in this field
oo-oo
I know you participated in that thread
Exactly, but what is unreal is potential difference between two points in this field
Nonsense. A potential difference between two points in a uniform field is perfectly well defined. (And routinely used in every intro physics class.) The only thing "unreal" is having a uniform field extending to infinity.
Hootenanny
Aug30-09, 09:38 AM
The point, as it always has been, is that the concept of infinity is complex and cannot be blindly applied. Loosely, every point in an infinite space is an infinite distance away from the 'edge' or infinity.
Exactly, but what is unreal is potential difference between two points in this field
oo-oo
No it is NOT! The potential difference between two points, a and b, in a [1D] field is,
V = \int_a^b F \; dx
Since F is constant,
V = \left[c_1x\right]_a^b
V = c_1\left(b-a\right)
Which is finite for finite a and b! What you are computing is the potential difference between infinity and any point on the real number line!
You are stuck at infinity, vin300. The obvious solution is to use some other reference as the reference plane.
For example, the Earth's gravitational field appears to be a uniform gravitational field for points sufficiently close to the surface of the Earth. When this approximation is used, we do not use the potential difference between a point and that at infinity. We use the potential difference between a point and the surface of the Earth: U=mgh.
Dadface
Aug30-09, 09:42 AM
Sorry if the following is irrelevant but I am in a rush and I need to read the thread again more carefully.
Firstly I am unable to envisage a situation where you can get a perfectly uniform gravitational field.You can get a uniform electric field between two oppositely charged metal plates.The force on a charge between the plates is independant of the position of that charge and the work done in taking the charge from one plate to the other is given by
=F*d=(V/d)q*d=Vq (V=pd,d=distance between plates,q= charge).In other words the work done is independant of the distance moved.Of course the electric field and gravitational field are different but the analogous features they share can be carried over to the problem being discussed here.
Sorry if the following is irrelevant but I am in a rush and I need to read the thread again more carefully.
This thread was derailed at post #31 and hasn't come back on track since. Edit That is post #1 now. See post #32 below.
Firstly I am unable to envisage a situation where you can get a perfectly uniform gravitational field.
An infinite plane will do the trick. How you can find an infinite plane is a difference issue.
A uniform field does not have potential difference:smile:
A uniform gravitational field \mathbf a = -ma\hat {\mathbf x} where a is some constant has a gravitational potential field U=gx, for example. Add any arbitrary constant to the potential and you get exactly the same uniform gravitational field.
Hootenanny
Aug30-09, 10:01 AM
This thread was derailed at post #31 and hasn't come back on track since.
Good point - I've split the two threads.
A very simple question:
If
F=-GMm/r^2
is constant at two points inthe field,why is
E(pot.)=-GMm/r
not constant at those points?
I'm pretty sure the formulae are correct, aren't they?
Born2bwire
Aug31-09, 02:46 AM
Neither would be constant, but they could be the same value (disregarding the direction of the force).
Neither would be constant,.
Good.Now look at Janus' post#19, in which he says two points in a field at different altitudes both at 1g have different potentials, and explain it to me
Moderation Note: Post number #19 is located in this thread (http://www.physicsforums.com/showthread.php?t=82309).
Born2bwire
Aug31-09, 03:08 AM
Good.Now look at Janus' post#19, in which he says two points in a field at different altitudes both at 1g have different potentials, and explain it to me
Now that I am already in the trap I'll answer once and let the mods move these posts as well. The force is constant, but the potential is not. Obviously, for a constant force over all space, you would need a potential that scales linearly since force is the gradient of the potential.
Dadface
Aug31-09, 03:09 AM
Currently we cannot define an absolute potential at a point,we can only calculate potential differences.We choose a reference location of infinity and ascribe to this a potential of zero but these are arbitary choices only and are made for convenience.In the majority of practical problems close to the earth, earths surface is taken as a reference location and this is given the value of zero potential.Again these are arbitary choices.If we remain fairly close to the earths surface the field is approximately uniform.
The force per unit mass is given by dV/dx but in a uniform field we can use non calculus notation and write F=V/x(here x stands for the distance between two places where the potential difference=V).If unit mass is moved between the two places the energy transferred is given by E=Fx=V/x*x therefore E=V.Since the weight is inversely proportional to the distance between the points this distance cancels when the equation Fd is used and the work done is finite.The same result drops out more simply from the definition of potential.
Good.Now look at Janus' post#19, in which he says two points in a field at different altitudes both at 1g have different potentials, and explain it to me
Example: you have a uniform gravity field of one g. (one that does not decrease in strength with height. You have two clocks of equal mass sitting at different heights in that field. The two clocks will have different gravitational potentials even though they both experience exactly 1g, and according to GR, the one that is above the other will run faster.
He is talking about a uniform gravity field of one g and how clocks at different heights will run at different rates according to general relativity. As the Earth does not have a uniform gravity field, Janus obviously is not talking about the Earth in this paragraph. He is using a uniform gravity field to illustrate a point: That gravitational time dilation is a function of gravitational potential, and not gravitational force.
Thus a clock sitting at the center of the Earth is not at the same potential as one in space, even though they experience the same gravitational force locally.
Now Janus obviously is talking about the Earth. At the center of the Earth the gravitational force toward the Earth is zero. The only (significant) gravitational force at the center of the Earth is that toward the Sun. Yet a clock located 1 AU from the Sun but well away from the Earth will run at a different rate than a clock at the center of the Earth because of the difference in gravitational potential between the two points.
Good God! I thought since nobody liked my posts these were deleted
Hootenanny
Aug31-09, 03:22 AM
Good God! I thought since nobody liked my posts these were deleted
Apologies, that was my fault. I should have sent you a PM letting you know that they had been moved. For future reference, you can find the location of all the threads you started (such as this one) and all the posts you made by looking at your profile.
He is talking about a uniform gravity field of one g .How much can this uniform field practically extend?
For crying out loud! Forever.
Dadface
Aug31-09, 03:43 AM
For crying out loud! Forever.
Only in a thought experiment.
For crying out loud! Forever.OK Believe me, now you are in a trap
The constant field extends forever, so not a function of distance.
F=-kGMm
Now the body is at rest, its potential energy is the negative of the energy required to escape this field
That is infinite
Thus I'm right, at every point it has infinite potential energy, and the potential difference is indeterminate.
If potential difference is indeterminate,
-dP/dx=F, F is also indeterminate which contradicts the original assumption
Hootenanny
Aug31-09, 03:56 AM
OK Believe me, now you are in a trap
The constant field extends forever, so not a function of distance.
F=-kGMm
Now the body is at rest, its potential energy is the negative of the energy required to escape this field
That is infinite
Thus I'm right, at every point it has infinite potential energy, and the potential difference is indeterminate.
If potential difference is indeterminate,
-dP/dx=F, F is also indeterminate which contradicts the original assumption
I do wish that you would read some of the posts properly. Here you are simply repeating yourself. I have already address this point here. (http://www.physicsforums.com/showpost.php?p=2327044&postcount=27)
Please re-read the post I have linked to and tell me exactly where you disagree with me.
I have read all those posts properly.But can you say something in the above post is wrong?
Isn't the potential infinite?
Hootenanny
Aug31-09, 04:02 AM
But can you say something in the above post is wrong?
Yes and I have explained it in the post that I linked to as well as previous ones.
Now the body is at rest, its potential energy is the negative of the energy required to escape this field
Wrong. That is but one definition of gravitational potential energy. While it is very useful in the case of a gravitational field toward some massive body, this definition has no use in the case of a uniform field. The obvious solution is to use a different definition.
All that matters with potential energy is the difference in potential energy between two points. The specific values assigned to those points is completely arbitrary. We use the energy needed to escape a field for the simple reason that the point at infinity is a convenient reference. There is absolutely nothing wrong with setting the Earth's gravitational field to be zero at the Earth's geoid. The potential at infinity would then be a finite positive number rather than zero. The potential difference between the surface of the Earth and the point at infinity is exactly the same regardless of which point is arbitrarily chosen as the zero reference.
Dadface
Aug31-09, 04:30 AM
Vin,I repeat a previous post:
In a uniform field the weight of unit mass can be given numerically by:
Weight =V/x..Here x is the distance between two points where the potential differs by V.
When you use ..Work= Force*Distance the x cancels so the work is finite not infinite.
definition has no use in the case of a uniform field.
There's no such thing as "a uniform field"
All that matters with potential energy is the difference in potential energy between two points.
Yes
. There is absolutely nothing wrong with setting the Earth's gravitational field to be zero at the Earth's geoid.No problem
The potential at infinity would then be a finite positive number rather than zero. The potential at infinity is a finite positive number.OK.The potential energy anywhere in this field would be the work done to bring it from infinity to this point.
Now hootenanny will say that isn't possible,
but that is perfectly possible, for you derive the formula of potential at a point using this very definition
Potential energy is the negative of the work done to bring the mass from infinity to a point
Here, the lower limit is infinity and the upper is the distance from the surface(r)
If you integrate, the term with r=infinity in the denominator disappears, and -GMm/r is the potential energy
When you use ..Work= Force*Distance the x cancels so the work is finite not infinite.That is what everyone has been saying on this thread forever, but I showed that this approach leads to a contradiction(if you believe the potential is infinite)
Dadface
Aug31-09, 04:45 AM
That is what everyone has been saying on this thread forever, but I showed that this approach leads to a contradiction(if you believe the potential is infinite)
The work done per unit mass is given,quite simply, by E=V so if in your thought experiment V is infinite then the work done is infinite.Sorry but I cannot see a contradiction and nor can I envisage a real situation where V is infinite.
Hootenanny
Aug31-09, 04:47 AM
There's no such thing as "a uniform field"
Practically no, but theoretically, yes. In any case, that isn't the principle point here.
The potential at infinity is a finite positive number.OK.The potential energy anywhere in this field would be the work done to bring it from infinity to this point.
No it wouldn't. In this case, defining the Earth's geoid to be the point of zero potential, the potential of the field would be the work done to bring the unit mass from the Earth's geoid to this point.
What is the definition of V?
What is the definition of V?
What matters is the difference in potential, which is the work done to move a unit mass against the field between two points.
For crying out loud!
That bears repeating. Only this time I'll say what I really meant last time:
Stop being intentionally thick.
Given a force field \mathbf F(\mathbf x), a function U is a potential function for the given force field if \mathbf F(\mathbf x) = \mathbf \nabla U(\mathbf x). That gradient means that potential energy is only defined to within an arbitrary constant. At which point the potential is chosen to be zero is arbitrary. You are hung up on an arbitrary point, the point at infinity. That point is very convenient in the case of a force field that follows an inverse square law. One must choose the point at which the potential is defined to be zero wisely as some choices yield nonsense results. For example, choosing the location of a point mass to be the zero point of the potential function for that point mass's gravitational potential yields nonsense results. Choosing the point at infinity in the case of a uniform force field similarly leads to nonsense results.
The solution is simple: Choose a different point. Any point that does not yield nonsense results will do. The origin, for example, is a reasonable choice. Given a uniform gravitational field \mathbf a=g\hat{\mathbf u}, a reasonable choice for a potential function is \mathbf U(\mathbf x) = -a \mathbf x\cdot \mathbf u.
No it wouldn't. In this case, defining the Earth's geoid to be the point of zero potential, the potential of the field would be the work done to bring the unit mass from the Earth's geoid to this point.Yes but all practical and theoretical definitions of a concept must remain the same, or the concept changes.
Even in this case, the potential energy is the negative of the energy supplied to relieve the mass of this field!
Hootenanny
Aug31-09, 05:00 AM
I will echo what DH said, stop being intentionally dense!
Even in this case, the potential energy is the negative of the energy supplied to relieve the mass of this field!
I agree. Note that in both cases - (a) defining the point of zero potential to be the limit as r approaches infinity - and (b) defining the point of zero potential to be the limit as r approaches zero; we take the potential energy at a point to be the work done to move the unit mass from the point of zero potential, which is 'infinity' in (a) and r=0 in (b), to that point.
Now, what don't you understand about that?
What matters is the difference in potential, which is the work done to move a unit mass against the field between two points.If the potential at a point according to the definition is infinite, and the potential at another point is infinite, then according to the definition the potential difference between these points is infinity subtracted from infinity
Hootenanny
Aug31-09, 05:07 AM
If the potential at a point according to the definition is infinite, and the potential at another point is infinite, then according to the definition the potential difference between these points is infinity subtracted from infinity
It seems to me that you aren't bothering to read anything that anyone else is writing, either that, or you are intentionally ignoring the parts that don't suite your argument.
I have already posted the definition of the potential difference between two points. Please take a look at this definition (click here (http://www.physicsforums.com/showpost.php?p=2327044&postcount=27)). Do you or do you not agree that that is the definition of the potential difference between two points? Please answer this question directly.
As an aside, infinities are not real numbers (they do not belong to the real number line) and therefore do not have the same additive properties of real numbers. I.e. infinity - infinity is not simply zero.
then according to the definition the potential difference between these points is infinity subtracted from infinity
Which is mathematical nonsense. You are not using the correct definition of potential, and you are being very stubborn about it. Stubbornness can be a useful trait at times, but not when it impedes your learning.
If the potential at a point according to the definition is infinite, and the potential at another point is infinite, then according to the definition the potential difference between these points is infinity subtracted from infinity
That should tell you that using "infinity" as a reference point is silly. All that physically matters is the change in potential between two points, which is well defined and trivially calculated. For a uniform field, choosing infinity as a reference is asinine.
You are hung up on a definition of gravitational potential that uses infinity as a reference, which is of limited use. Time to move on.
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.