Double A
Nov7-04, 06:40 PM
I have been attempting to answer the problems on my Statics assignment for about a week now but I have not been so success full. I have only be able to answer on of the problems the other three below I get stuck on. Can someone please help me get past the areas where I get stuck?
The first question that I'm having trouble with can be found by following the link below
Question 1 (http://herograw.com/7-20.JPG) (http://herograw.com/7-20.JPG)
My free body diagram looks like: Free Body Diagram 7-20 (http://herograw.com/fbd7-20.JPG) (http://herograw.com/fbd7-20.JPG)
I'm not sure if that is the right the free body diagram and I am unsure as to how I can find the that largest virtical force. I'm wondering if I should leave the cable in the free body diagram that way its interaction is internal to the system and only have three unknown to find using \Sigma F_x = 0, \Sigma F_y = 0, \Sigma M_A = 0 . Then I could go onto finding the internal normal force, shear force, and moment at the section C after I make free body diagrams for the section.
The second question is: Question 2 (http://herograw.com/7-32.JPG) (http://herograw.com/7-32.JPG)
My free body diagram is:Free Body Diagram 7-32 (http://herograw.com/fbd7-32.jpg) (http://herograw.com/fbd7-32.jpg)
In this question I am comming up with four unknowns (Ax, Ay, Cx, and Cy), but I only have 3 equations to use (\Sigma F_x = 0, \Sigma F_y = 0, \Sigma M_A = 0 ). I don't think member AB is a two force body because there is an applied load acting on it. I'm not sure as to what I should do finish this problem. I need to know what the reaction forces are before I can find the internal forces acting at the section point D.
Lastly:Question 3 (http://herograw.com/7-40.JPG) (http://herograw.com/7-40.JPG)
This question confuses me. Could someone please clarify some as to what I need to do solve this question. I'm not sure how to make my free body diagram. I need a starting point and I can't seem to find one on my own.
Someone please help. I have to get this done before Tuesday. I thank all who can help in advanced.
The first question that I'm having trouble with can be found by following the link below
Question 1 (http://herograw.com/7-20.JPG) (http://herograw.com/7-20.JPG)
My free body diagram looks like: Free Body Diagram 7-20 (http://herograw.com/fbd7-20.JPG) (http://herograw.com/fbd7-20.JPG)
I'm not sure if that is the right the free body diagram and I am unsure as to how I can find the that largest virtical force. I'm wondering if I should leave the cable in the free body diagram that way its interaction is internal to the system and only have three unknown to find using \Sigma F_x = 0, \Sigma F_y = 0, \Sigma M_A = 0 . Then I could go onto finding the internal normal force, shear force, and moment at the section C after I make free body diagrams for the section.
The second question is: Question 2 (http://herograw.com/7-32.JPG) (http://herograw.com/7-32.JPG)
My free body diagram is:Free Body Diagram 7-32 (http://herograw.com/fbd7-32.jpg) (http://herograw.com/fbd7-32.jpg)
In this question I am comming up with four unknowns (Ax, Ay, Cx, and Cy), but I only have 3 equations to use (\Sigma F_x = 0, \Sigma F_y = 0, \Sigma M_A = 0 ). I don't think member AB is a two force body because there is an applied load acting on it. I'm not sure as to what I should do finish this problem. I need to know what the reaction forces are before I can find the internal forces acting at the section point D.
Lastly:Question 3 (http://herograw.com/7-40.JPG) (http://herograw.com/7-40.JPG)
This question confuses me. Could someone please clarify some as to what I need to do solve this question. I'm not sure how to make my free body diagram. I need a starting point and I can't seem to find one on my own.
Someone please help. I have to get this done before Tuesday. I thank all who can help in advanced.