Calculating Change in Velocity of 600kg Sports Car

Click For Summary

Homework Help Overview

The discussion revolves around calculating the change in velocity of a 600kg sports car that is braking before reaching a railroad crossing 250m away. The car is initially traveling at 40m/s, and a friction force of 1200N is applied to stop the vehicle.

Discussion Character

  • Exploratory, Mathematical reasoning, Assumption checking

Approaches and Questions Raised

  • The original poster attempts to calculate the change in velocity using time and displacement but encounters issues with unrealistic time values. They also explore using F=ma to find acceleration but question their results regarding the direction of velocity change.

Discussion Status

Some participants provide guidance on using F=ma, suggesting that the choice of positive direction affects the sign of acceleration. Others mention integrating equations to relate velocity and displacement, indicating a productive exploration of the problem. The original poster seems to have adjusted their approach based on feedback, leading to a new velocity calculation.

Contextual Notes

There is a noted confusion regarding the correct application of force values and the direction of acceleration, which may impact the calculations. The original poster's initial results led to questioning the assumptions made in their approach.

NMW
Messages
11
Reaction score
0
2) the driver of a 600kg sports car, heading directly for a railroad crossing 250m away, applies the brakes i a panic stop. the car is moving at 40m/s, and the brakes can supply a friction force of 1200N. a) how fast is the car moving when it reaches the crossing?

- i tried finding the change in time for this, thinking i could then find displacement from that, but it ended up as 2.5hours!
i then used f=ma and then average acceleration, got acceleration = 8... or neg 8... but then when i worked it out for change in velocity i got that the velocity was increasing, which can't be right seeing as the car is slowing down!?
any help appreciated!

3) a metre-stick is found to balance at the 29.7cm mark when placed on a fulcrum, when a 50g mass is attached at the 10cm mark the fulcrum must be moved to the 39.2 cm mark for balance. what is the mass of the meter stick?

- just plain stuck on this, tried about 3 different ways of attempting the question, but couldn't find one that suited! again, any help appreciated!

:)
 
Physics news on Phys.org
NMW said:
i then used f=ma and then average acceleration, got acceleration = 8... or neg 8...

If you define the positive direction to be the direction of motion, then the acceleration is indeed negative. But it sure isn't -8. Just divide F by m and you get:

[tex]a=\frac{F}{m}=\frac{-1200N}{600kg}[/tex]

You can finish that, right?
 
F = ma is the way to go. You just have to choose which direction is positive and keep everything consistent from there. Once you have F=ma you can integrate to get v and again to get x. This gives you three sets of equations specific to you problem that you can then use to get the answer.
 
thanks

ok, i think i have got this one... i was just using the wrong value for force, which was throwing it all out.. once using -2m/s^2 i put that into the v^2=v(initial)^2 + 2a (x-x(initial) or something along those lines... it then came out as 24.5m/s, which fits with the rest of the calculations in the question!
thanks! :)
 

Similar threads

  • · Replies 11 ·
Replies
11
Views
8K
  • · Replies 3 ·
Replies
3
Views
2K
Replies
7
Views
2K
  • · Replies 4 ·
Replies
4
Views
2K
  • · Replies 2 ·
Replies
2
Views
3K
  • · Replies 2 ·
Replies
2
Views
2K
  • · Replies 5 ·
Replies
5
Views
2K
Replies
8
Views
3K
Replies
11
Views
2K
  • · Replies 1 ·
Replies
1
Views
3K