Sources of Information on Engineering

[Astronuc]

For those who would like some technical references, DOE Handbooks are available on line at:

http://tis.eh.doe.gov/techstds/standard/standard.html

Just click on the PDF link.

Look for:

DOE Fundamentals Handbook, Classical Physics, DOE-HDBK-1010-92

DOE Fundamentals Handbook, Electrical Science, Volume 1,2,3,4 of 4, DOE-HDBK-1011/1,2,3,4-92

DOE Fundamentals Handbook, Thermodynamics, Heat Transfer, and Fluid Flow, Volume 1,2,3 DOE-HDBK-1012/1-92

DOE Fundamentals Handbook, Material Science, Volume 1 of 2 DOE-HDBK-1017/1-93

DOE Fundamentals Handbook, Material Science, Volume 2 of 2 DOE-HDBK-1017/2-93

DOE Fundamentals Handbook, Nuclear Physics and Reactor Theory, Volume 1 of 2 (142 pages), DOE-HDBK-1019/1-93

DOE Fundamentals Handbook, Nuclear Physics and Reactor Theory, Volume 2 of 2 (128 pages), DOE-HDBK-1019/2-93

and many others.

 

[Astronuc]

A number of questions, particularly involving homework, often involve some basic engineering.

In the US, the National Society of Professional Engineers (NSPE - www.nspe.org) has arranged for the publication of various reference manuals as part of the training for licensing exams. The manuals contain an overview of the particular engineering discipline, some basic theory, general information, tables and fundamental equations, and example problems.

Mechanical Engineering Reference Manual (for the PE Exam)
Michael R. Lindeburg

Civil Engineering Reference Manual (for the PE Exam)
Michael R. Lindeburg

Electrical Engineering Reference Manual (for the Electrical and Computer PE Exam)
John A. Camara, Raymond B. Yarbrough

Chemical Engineering Reference Manual for the PE Exam
Michael R. Lindeburg

These can be found through on-line book stores.

I suspect Engineering Societies in other nations offer similar texts.

 

[russ_watters]

I'm sticky'ing this in response to a requst by Astronuc. This is a great idea (thanks, Astronuc) and something the engineering forums have been lacking. Please post links, book suggestions, etc. to resources for engineering. This should be mostly for students, but things that may be useful for professionals would be good as well. For starters...

Dictionary of Measures, Units, and Conversions

 

[FredGarvin]

In case anyone is interested, the reference book used in the FE exam is available through NCEES:

http://www.ncees.org/exams/study_materials/fe_handbook/

 

[stjimmy]

hey what type of infomation are you looking for?

 

[brewnog]

Online Materials database:

Matweb

 

[Astronuc]

Another thread in the Materials and Chemical Engineering asked about steels and seismic performance. I did some checking around and identified some codes that identify particular grades of steel for specific designs, e.g. steel for reinforced concrete vs steel plate for beams and columns. However, the design process involves much more than material.

The design of a structure to withstand a seismic load is very detailed. One of the best sources is the Caltrans Seismic Design Criteria Manual. It is available on-line as pdf files.

Table of Contents

Every civil and structural engineer, who is involved in design of structures, should study this document.

 

[Astronuc]

Fluid Mechanics Reference

I don't know how long this will be around, but it is a great on-line resource for fluid mechanics/dynamics.

Dynamical Oceanography. Part I: Fundamental Principles
http://stommel.tamu.edu/~baum/reid/book1/book/book.html

 

[PerennialII]

Some numerical software references & general sources of information

... this with emphasis to free etc. software :

... FEM based software (the first a general, really extensive collection of everything related) :

http://homepage.usask.ca/~ijm451/finite/fe_resources/
http://cern49.ce.uiuc.edu/cfm/warp3d.html
http://vector-space.com/newpage2.htm
http://tochnog.sourceforge.net/tnhome.html

... a Pre & Post - processor & a compliant Navier-Stokes solver + general visualization link :

http://gid.cimne.upc.es/index.html
http://adfc.sourceforge.net/index_en.html
http://www.csc.fi/visualization/index.html

... BEM resources :

http://www.olemiss.edu/sciencenet/benet/
http://www.boundary-element-method.co.uk/
http://www.cfg.cornell.edu/software/software.htm

... about math libraries and software in general :

http://www.csc.fi/math_topics/Software.html

... general "engineer - readable" approach to PDEs and numerical solving of them :

http://www.lifelong-learners.com/pde/

 

[FredGarvin]

Just to get some basics out there...

General Design:
http://www.boltscience.com/pages/info.htm
http://www2.chicago-rawhide.com/catalog_pdf.htm
http://www.mech.uwa.edu.au/DANotes/intro/contents.html#top

Machine Element Design:
http://www.mech.uwa.edu.au/DANotes/intro/contents.html#top
http://www.mrcbearingservices.com/engineeringdata.asp
http://www.utm.edu/departments/engin/lemaster/machine_design.htm
http://www.co-design.co.uk/dpg/guides.htm
http://www.tapmatic.com/tech_manual/index.html

General Engineering:
Java Learning Appletes: http://www.engapplets.vt.edu/
http://www.roymech.co.uk/index3.htm

Process Control/Instrumentation:
Omega's Technical Library (EXCELLENT SOURCE!):
http://www.omega.com/techref/
http://www.pc-education.mcmaster.ca/instrumentation/go_inst.htm

Fluids:
LMNO Engineering: http://www.lmnoeng.com/
Standard Atmosphere Calculator: http://aero.stanford.edu/StdAtm.html
Piping: http://www.pipingdesign.com/
Pumps Fundamentals: http://www.gouldspumps.com/cat_technews_0005.html

Sound/Vibration:
http://www.silcom.com/~aludwig/index.htm
http://www.vibrationdata.com/tutorials.htm (EXCELLENT SOURCE!)
http://www.sandv.com/home.htm
http://www.bradford.ac.uk/research/mbdmst/rotordynamic/

 

[Danger]

Wow! Excellent thread, guys.

 

[engware]

Hi there:

For anywhere, anytime free engineering e-solutions for energy conversion systems, check out http://members.aol.com/engware.free .

An MS Excel file is attached.

Thanks,

Gordan

 

[Astronuc]

Perhaps we need to add information on Academic programs in Engineering.

https://engineering.purdue.edu/Engr/

https://engineering.purdue.edu/Engr/Research/


Please contribute information from your Engineering Department or School.

Purdue has a nice form showing the outline of an Mech E degree.
http://tools.ecn.purdue.edu/ME/Undergrad/

It should be comparable to other programs.

 

[vsdguy]

Hi all,

I am new on the forum and was wondering if there is a source where I can download or get engineering ebooks?

Any help would be appreciated.

Regards,

Vsdguy

 

[meee]

for prospective students
http://www.engineeringk12.org/students/default.htm

 

[Astronuc]

I am new on the forum and was wondering if there is a source where I can download or get engineering ebooks?

Welcome to PF, vsdguy. There may not be too many free e-books available on-line. Most engineering texts must be purchased.

In what particular engineering courses/disciplines is one interested? MIT has some open courseware. http://ocw.mit.edu/index.html

One can find, Electrical Engineering and Computer Science, Engineering Systems Division, Materials Science and Engineering, Mechanical Engineering, and Nuclear Science and Engineering. There are many course notes available in pdf format. One can also find Mathematics here and at other university sites.

PF also has Physics, Math and Science tutorials.

 

[Astronuc]

http://aiche-chicago.org/

The Chicago Section is one of the largest within the institute, with over 1,200 members.

American Institute of Chemical Engineers - http://www.aiche.org/ - national organization.

 

[vsdguy]

Thank you all,

I am specificaly interested in controls. More specificaly in control engineering. PID, AC/DC controls, automation, AC drives, Power electronics. I will check the site you provided Astronuc.
Thank you all again for sharing information.

Regards,

vsdguy

 

[FredGarvin]

I haven't had a chance to read through it yet, but here is a book on compressible flow. There do appear to be some things that need to be fixed. Consider it a work in progress:

http://www.potto.org/gasDynamics/index.html

 

[FredGarvin]

Google Scholar

I came across this recently while doing some patent research. It is very handy when looking for technical articles and such. It has a very nice searchable PDF interface that makes finding what you are looking for a lot easier.

Google Scholar

 

[Mike Seoni]

Process Engineering Technical Library

Technical Library covering all sorts of drying and agglomeration processes, including spray drying and fluid bed drying can be found at Niro.com

best
M.S.

 

[Mike Stanley]

EE HomePage.com (http://www.eehomepage.com) currently has listings for 150+ free textbooks on physics, math, programming and electrical engineering topics.

 

[sayak]

I have a lot of e-books on mechanical engineering. Is there a resource folder of some sort in which I can upload them?

 

[hxtasy]

http://www.youtube.com/user/MIT

This is a very good source for learning theory. This is MIT's youtube channel. They have everything from biology, differential equations, to fluid mechanics. It's a great way to virtually sit through one of their classes. I viewed about all of their differential equations videos, I am in diff eq class in college now and it's nice to get a different view on some of the theory, and relearn what i should've learned when i was day dreaming in class.


I also just watch some of the fluid mechanic lessons, they are so interesting.



very good thread guys!

 

[regal231]

Not sure if this has been posted, but I came across this awhile ago.

efunda.com

 

[matqkks]

Are there any good engineering mathematics books?

 

[jonam18]

Just to get some basics out there...

General Design:
http://www.boltscience.com/pages/info.htm
http://www2.chicago-rawhide.com/catalog_pdf.htm
http://www.mech.uwa.edu.au/DANotes/intro/contents.html#top

Machine Element Design:
http://www.mech.uwa.edu.au/DANotes/intro/contents.html#top
http://www.mrcbearingservices.com/engineeringdata.asp
http://www.utm.edu/departments/engin/lemaster/machine_design.htm
http://www.co-design.co.uk/dpg/guides.htm
http://www.tapmatic.com/tech_manual/index.html

General Engineering:
Java Learning Appletes: http://www.engapplets.vt.edu/
http://www.roymech.co.uk/index3.htm

Process Control/Instrumentation:
Omega's Technical Library (EXCELLENT SOURCE!):
http://www.omega.com/techref/
http://www.pc-education.mcmaster.ca/instrumentation/go_inst.htm

Fluids:
LMNO Engineering: http://www.lmnoeng.com/
Standard Atmosphere Calculator: http://aero.stanford.edu/StdAtm.html
Piping: http://www.pipingdesign.com/
Pumps Fundamentals: http://www.gouldspumps.com/cat_technews_0005.html

Sound/Vibration:
http://www.silcom.com/~aludwig/index.htm
http://www.vibrationdata.com/tutorials.htm (EXCELLENT SOURCE!)
http://www.sandv.com/home.htm
http://www.bradford.ac.uk/research/mbdmst/rotordynamic/

Hello Fred,

this was an excellent information put up by you... Could you please inform me about a site which wuold give a guideline for pressure vessel design ( along with sample calculations maybe).

thanks,

 

[Astronuc]

Most of the pressure or storage vessels in service in the United States will have been designed and constructed in accordance with one of the following two pressure vessel design codes:

• The ASME Code, or Section VIII of the ASME (American Society of Mechanical Engineers) "Boiler and Pressure Vessel Code."
• The API Standard 620 or the American Petroleum Institute Code which provides rules for lower pressure vessels not covered by the ASME Code.

http://www.osha.gov/dts/osta/otm/otm_iv/otm_iv_3.html
http://www.hghouston.com/pvessel.html

The design, fabrication and use of pressure vessels is a serious matter given that failure can have serious consequences (death or injury) to people in the vicinity of failed PV's.

If one is designing and building a PV with the intent to use it, one must adhere to the above two codes, whichever is appropriate.

Power boilers are a common application:
http://engineers.ihs.com/collections/asme/bpvc-2007.htm

Section I – Power Boilers
This Section provides requirements for all methods of construction of power, electric, and miniature boilers; high temperature water boilers used in stationary service; and power boilers used in locomotive, portable, and traction service. Rules pertaining to use of the V, A, M, PP, S and E Code symbol stamps are also included.

It might be worthwhile to have a dedicated thread on BPV's, or perhaps just PV's.

 

[FredGarvin]

Personally I don't think I would not want to take a major part in a thread about pressure vessels except on an amature level. Section VIII is absolutely huge and the area of their design is a very specialized area. I know I would not feel comfortable giving someone advice regarding a pressure vessel in accordance to ASME specs. I think, probably, only Q_Goest is the only one here that has a good amount of experience in that area.

 

[Astronuc]

Body of Knowledge

The American Society for Civil Engineers has produced their 2nd edition of the Body of Knowledge.

http://www.asce.org/professional/educ/bok2.cfm

It's well worth a look, even if one is not a civil engineer.


Other sources on ASCE education products.
http://www.asce.org/professional/educ/


Every 4 years [I thought it was annual], ASCE produces a report card on the state of infrastructure -

US roads, water and basic systems earn 'D' grade
http://news.yahoo.com/s/ap/20090128/ap_on_bi_ge/failing_backbone

Engineers: U.S. infrastructure a 'D'
American Society of Civil Engineers says under-funding has caused the nation's infrastructure to crumble - and stimulus won't do enough.
http://money.cnn.com/2009/01/28/new..._report_card/index.htm?postversion=2009012811

With that in mind -

NTSB Expected to Adopt Final Report on I-35W Bridge Collapse;
Agency Probe Cites Gusset Plate Design Flaw
http://content.asce.org/I-35W/NTSBI35W.html

The National Transportation Safety Board is expected to issue a ruling late Friday on the probable causes and contributing factors of the Aug. 1, 2007, I-35W bridge collapse in Minneapolis that killed 13 people and injured 145. Their findings will be released formally at the conclusion of a two-day public board meeting that opened Thursday in Washington.

During Thursday's testimony, federal investigators said they had discovered a major design flaw that dated to the bridge's original design in the mid-'60s -- the steel gusset plates that held beams together were only half the required thickness. The bridge was in the midst of repairs at the time of the collapse. Equipment and supplies at one point of excessive weight in the center span caused weak plates to give out, which pulled down the adjacent sections in turn.

The NTSB has been investigating the catastrophic failure of the eight-lane, 1,907-foot-long highway bridge over the Mississippi River over the past 15 months since the collapse. The board made the two-day meeting available via a live webcast, which is being archived for later viewing online. The NTSB planned to release a summary of their final report shortly after the conclusion of the meeting. The entire report will be released in "several weeks," according to the NTSB.

 

[archis]

To bad you don't understand russian, they have so many good books and info about engineering in internet.

 

[RTFVerterra]

Solved problems in Strength of Materials with a very short explanation of principles and theories. Good for beginners and those who want to refresh themselves.

http://www.mathalino.com/reviewer/m...materials/mechanics-and-strength-of-materials

 

[MurrayMD]

It's amazing what you can find on the web. I was looking for more information on Fourier transforms and stumbled onto an excellent resource via a series of lectures posted on YouTube through a Stanford University outreach program. Excellent course, and the home page has all the course notes, lecture notes and exams.

If you want a textbook for a certain course but don't plan to take the course just yet, used book stores can be a gold mine and so can ebay. Find out what edition the local college or university is teaching from then get the previous edition. The main changes from one edition to the next are usually the problem sets and the graphics, neither of which affect the material that is taught. There's little demand for out-of-date textbooks but they're perfectly fine to study or as references and can be had for a song. My best standby is still Google and/or Wikipedia. They provide the quickest answers for me when I need them.

 

[MacLaddy]

Well, as I am in the very (and I mean "very") beginning stages of my degree in Electrical Engineering, I am not sure if this book would be very much help to the advanced engineer; but I know it is going to help me in the meantime.

https://www.amazon.com/dp/0831128003/?tag=pfamazon01-20

 

[FredGarvin]

I have 3 different copies of Machinery's handbook and use them almost every day.

 

[gfowler1980]

I have 3 different copies of Machinery's handbook and use them almost every day.

Can you please explain why you'd need more than one? The only reason I could imagine is if you have them in different locations (e.g. desk, plant floor, etc...).

I recently got the a digital (CD) copy of the 28th Edition, and I find it to be far-superior to the old-school paper book for a few reasons:

• can print/reproduce any pages in whatever paper size you want (great for looking at the smallish figures/graphs)
• can search and find anything almost instantly
• no more lugging around (or losing) those rather-bulky tomes
• can share (over a network)
• easy to copy-&-paste

 

[gfowler1980]

I am currently maintaining a random (but useful) archive of (mostly mechanical) engineering references using http://docs.google.com" , which is an amazingly useful (and FREE) service.

Anybody can access it for free by going here:
http://docs.google.com/leaf?id=0B2W7M3dYDzF8OWM5MzdiOTUtOTg5Yi00YzBiLThhZTctYWYwYjYxY2M4N2Y2&hl=en"


It's an ever-growing work-in-progress. Please contact me if you have anything I can add to the collection.

 

[FredGarvin]

Can you please explain why you'd need more than one?

I work at more than one location including home.

 

[Astronuc]

Frontiers of Engineering:
Reports on Leading-Edge Engineering from the 2009 Symposium
http://books.nap.edu/catalog.php?record_id=12821

In 1995, the National Academy of Engineering initiated the Frontiers of Engineering Program, which brings together about 100 young engineering leaders at annual symposia to learn about cutting-edge research and technical work in a variety of engineering fields. The 2009 U.S. Frontiers of Engineering Symposium was held at The National Academies' Arnold O. and Mabel Beckman Center on September 10-12. Speakers were asked to prepare extended summaries of their presentations, which are reprinted in this volume. The intent of this book is to convey the excitement of this unique meeting and to highlight cutting-edge developments in engineering research and technical work.

 

[afreiden]

My new website is up, which covers topics in structural engineering that are applicable to students across a wide range of disciplines, in particular students who are studying general civil engineering and mechanical engineering.

Undergraduate engineering
I am sharing undergraduate notes on structural engineering, which include statics, mechanics of materials, and classical structural analysis. We are in the process of transcribing our notes on some of the "design" courses that undergraduate civil engineering typically students take, such as reinforced concrete design, steel design, and timber design.

Graduate engineering
As far as graduate-level structural engineering, we so far have some very detailed notes on prestressed concrete.

You can find everything here:

http://www.utsv.netMy favorite topic, and a personal area of research is solid mechanics. On the website, please find our free textbook on solid mechanics (a.k.a. continuum mechanics), which is particularly useful for researchers that use finite element analysis software and want a better understanding of the physics. The textbook is written for graduate students or researchers in industry in the fields of structural engineering, mechanical engineering (the forum that I most often frequent on PF), and also bioengineering, as one of the areas of focus in the texbook is "hyperelasticity" - relevant for those researchers who use finite element analysis software to model the behavior of biological tissue or rubber.

http://utsv.net/solid-mechanicsEnjoy!----
P.S. - Mods, many of the links in this thread are dead. Just FYI
----

 

[MLINJA 2MS]

thank you all, it is good thread

 

[JBA]

25 of ASME B36.4 piping mat'l standards online for free viewing and no registering, sign up etc. required.

The below website also other tech information i.e. I found it while looking for Steam Superheat Corrections and they have a table of the ASME approved values that can be printed as well.

http://www.piping-designer.com/index.php/standards/184-asme-standards

 

[osilmag]

There is a book about the future in the field of engineering. It would be interesting to compare how it is now to what was written then.The Engineer of 2020

 

[berkeman]

Nice Engineering Toolbox website posted by @Dullard in a recent thread:

https://www.engineeringtoolbox.com/