What Are the Mean Lifetime and Branching Ratios for an F- Particle?

  • Thread starter Thread starter genloz
  • Start date Start date
  • Tags Tags
    Mean
Click For Summary
SUMMARY

The F- particle, with a charge of -1, has three decay modes with mean lifetimes of 5 microseconds, 50 milliseconds, and 20 microseconds. The overall mean lifetime of the F- particle is calculated to be approximately 16.6 milliseconds. The branching ratios for the decay modes are determined to be approximately 0.7999 for Mode 1, 7.999 x 10^-5 for Mode 2, and 0.19998 for Mode 3. These calculations utilize the relationships between mean lifetime and decay width, specifically using the formulas for overall decay width and branching ratios.

PREREQUISITES
  • Understanding of particle physics and decay processes
  • Familiarity with mean lifetime and decay width concepts
  • Knowledge of branching ratios in particle decay
  • Basic proficiency in mathematical calculations involving exponential decay
NEXT STEPS
  • Study the principles of particle decay and lifetime calculations
  • Learn about the significance of branching ratios in particle physics
  • Explore advanced topics in quantum mechanics related to decay processes
  • Investigate experimental methods for measuring particle lifetimes at the LHC
USEFUL FOR

Students and researchers in particle physics, physicists analyzing decay processes, and anyone interested in the properties of exotic particles like the F- particle.

genloz
Messages
72
Reaction score
1

Homework Statement


1. In a theory a charged particle called F- (charge=-1) exists. This particle has three decay modes that will be observed at the LHC. The mean time between F- particle creation and each kind of decay is found to be:
Mode Mean lifetime
Mode 1 5 microsec
Mode 2 50 millisecond
Mode 3 20 microsec
What is the mean lifetime of the F particle, and what are the branching ratios for each of the three modes?

Homework Equations


None given, but my thoughts were that these were relevant:
[tex]\Gamma_{overall} = \frac{1}{\tau}[/tex]
[tex]Branching Ratio= \frac{\Gamma_{partial}}{\Gamma_{overall}}[/tex]

The Attempt at a Solution


Mean Lifetime:
[tex]\tau = ((5*10^{-6})+(50*10^{-3})+(20*10^{-6}))/3[/tex]
[tex]\tau = 1.66*10^{-2}[/tex]

[tex]\Gamma_{overall} = \frac{1}{\tau}[/tex]
[tex]\Gamma_{overall} = 60.24[/tex]

Branching Ratio for Mode 1:
[tex]\Gamma_{partial} = \frac{1}{\tau}[/tex]
[tex]\Gamma_{partial} = \frac{1}{(5*10^{-6})}[/tex]
[tex]\Gamma_{partial} = 200000[/tex]
[tex]Branching Ratio= \frac{\Gamma_{partial}}{\Gamma_{overall}}[/tex]
[tex]Branching Ratio= \frac{200000}{60.24} = 3320[/tex]

But then that didn't look much like a ratio so I started to wonder if I'd made a mistake or units were incorrect or something?
 
Physics news on Phys.org
Okay, I had a bit of a think and came to this conclusion...
[tex]\Gamma_{overall}=\frac{1}{\tau_{1}}+\frac{1}{\tau_{2}}+\frac{1}{\tau_{3}}[/tex]

Therefore,

Mode 1
[tex]\Gamma_{partial1}=\frac{1}{5*10^{-6}}[/tex]
[tex]\Gamma_{partial1}=200000[/tex]

Mode 2
[tex]\Gamma_{partial2}=\frac{1}{50*10^{-3}}[/tex]
[tex]\Gamma_{partial2}=20[/tex]

Mode 3
[tex]\Gamma_{partial3}=\frac{1}{20*10^{-6}}[/tex]
[tex]\Gamma_{partial3}=50000[/tex]


So,
[tex]\Gamma_{overall}=250020[/tex]

So the branching ratios are:
Mode 1
[tex]\frac{\Gamma_{partial1}}{\Gamma_{overall}}=\frac{200000}{250020}[/tex]
[tex]=0.7999[/tex]

Mode 2
[tex]\frac{\Gamma_{partial2}}{\Gamma_{overall}}=\frac{20}{250020}[/tex]
[tex]=7.999*10^{-5}[/tex]

Mode 3
[tex]\frac{\Gamma_{partial3}}{\Gamma_{overall}}=\frac{50000}{250020}[/tex]
[tex]=0.19998[/tex]

Does that sound about right?
 
I guess the width should be hbar/meanlife but I don't think that matters in this instance...
 

Similar threads

  • · Replies 13 ·
Replies
13
Views
6K
  • · Replies 0 ·
Replies
0
Views
2K
  • · Replies 7 ·
Replies
7
Views
3K
  • · Replies 10 ·
Replies
10
Views
2K
Replies
4
Views
3K
Replies
7
Views
2K
  • · Replies 5 ·
Replies
5
Views
10K
  • · Replies 5 ·
Replies
5
Views
3K
  • · Replies 2 ·
Replies
2
Views
2K
Replies
8
Views
2K