Baluncore's latest activity

ALFALFA Sprouts are highly nutritious and rich in vitamins B1, B2, C, E, K, D and especially vitamin A; minerals such as phosphorus...

Please show the equations that you use to compute the moments, for the cases you present.

The 1 mA FSD meter will have Full-Scale-Deflection, 100%, when an average current of 1 mA flows. The total resistance is 5kΩ + 10Ω =...

At the instant of a hydraulic burst, there are jets of hydraulic fluid that can sever limbs, or give subcutaneous injections of oil that...

How far would you expect the vented system to move without the shear pin, when climbing or descending from altitude? If the cylinder is...

What is the application for such a device? It is clearly needed for emergency application only, such as severing a fouled winch cable...

The meter is a moving coil meter, with an internal resistance of 10 Ω. That is the resistance of the coil and the hairsprings. The...

The practical "Troy system" unit of beauty, something we are more likely to encounter, is the micro-helen, the beauty required to push a...

Maximum tension will be at 5°. Half of the mass of each leaf rests on the ground, the other half at the top pivot, making 80 kg total at...

The fan lowers the pressure at the inlet. Air from all directions begins to flow toward the fan, turning gradually as it accelerates...

What was the capacity of the old pump in cubic feet of free air per minute? How does that compare with the replacement? Did the...

Forget my previous post. I have fixed a few bugs and got the uA709 / LM709 working as a 5kHz voltage follower. Attached are the .asc and...

You need to comment out the *.subckt and *.ends to make the nodes and components in the model available on that schematic page. You can...

There are two ways. 1. You can simply copy the spice text into a .op spice directive box, then place that on the schematic page. 2. You...

Also, thicker wire will hold more ice. Ice on overhead wire is bad news. Heavy ice on wires alone is not necessarily why they come down...