Clearing ADPL Log & Error Files: Guided Solution

  • Thread starter Thread starter koab1mjr
  • Start date Start date
  • Tags Tags
    Ansys
AI Thread Summary
To clear large ADPL log and error files, users can utilize both the GUI and direct ADPL commands. The GUI method typically involves navigating to the settings or maintenance section where log files can be managed. For the command line approach, specific ADPL commands can be executed to delete or truncate the log files. It's important to regularly manage these files to maintain system performance. Clear guidance on both methods is essential for new engineers working with ADPL.
koab1mjr
Messages
105
Reaction score
0
Hi all

New engineer cutting my teeth on the ADPL language
I am using the HUI as a crutch and i often go to the log file to see what the program is doing and I cut and paste out of that for my macros. I have been using this for a while and my log and error files are huge how do i clear them out? IS there a quick way to do this

preferably if I could get the procedure in two ways via GUI and using the ADPL commands directly thanks in advance.

KAOB
 
Engineering news on Phys.org
really no one?
 
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...
Back
Top