Finding weight in Newtons and scale reading in accelerating elevator

[miss_taken19]

I have a couple homework problems that are causing me some trouble...

1. The weight of 600g of salami is:
a) 0.061 N
b) 5.9 N
c) 61 N
d) 5.9 kN

I found the answer to be a) 0.061N because F=mg so m=F/g which is
0.6kg/9.8m/sec.squared. The answer is actually b) 5.9 N but I can not figure out how the got this answer. Any insights to this?

Also...

2. A 60-kg person stands on a scale in an elevator. How many Newtons does the scale read when a) it is ascending at the constant speed of 3.0 m/sec.squared? b) it is desending at the constant speed of 3.0 m/sec. squared?

I am not sure how to find this out. On one hand, I think that I need to find the acceleration at these speeds. Yet I do not think that there is any acceleration when the speed is constant. Am I sort of on the right track here?

Thanks for your help!

 

[parttime]

for 1 isn't w = mg which give you .6kg *9.8 = 5.88 founded up to 5.9
for 2 what i think is this not sure if you have the answers to checkif it is correct f = ma f= 60 * 9.8 + and - 3 m/s just a guess not sure

 

[Hootenanny]

Hi there Mistaken and welcome to PF.

I have a couple homework problems that are causing me some trouble...

Well, you have definatly come to the right place.

1. The weight of 600g of salami is:
a) 0.061 N
b) 5.9 N
c) 61 N
d) 5.9 kN

I found the answer to be a) 0.061N because F=mg so m=F/g which is
0.6kg/9.8m/sec.squared. The answer is actually b) 5.9 N but I can not figure out how the got this answer. Any insights to this?

I think you are getting a lttle confused here. Is 600g a force or a mass? Is weight a mass or a force?

2. A 60-kg person stands on a scale in an elevator. How many Newtons does the scale read when a) it is ascending at the constant speed of 3.0 m/sec.squared? b) it is desending at the constant speed of 3.0 m/sec. squared?

I am not sure how to find this out. On one hand, I think that I need to find the acceleration at these speeds. Yet I do not think that there is any acceleration when the speed is constant. Am I sort of on the right track here?

Again, I think you getting a little confused here, you are not given any speeds; you are given accelerations, note the untis m.s^-2. The scale in the lift actually measures the reaction force exerted by the lift on the perons. I think it would be helpful here if you drew a free body diagram. A good thread which previously described the mechanics is located https://www.physicsforums.com/showthread.php?t=120110".

Think about summing the forces acting; $\sum F = m\vec{a}$.

~H

 

[miss_taken19]

Thanks for the help with the first one. It make a lot more sense now. I actually wrote the wrong units down for the second problem. The elevator is ascending and desending at 3.0 m/s not 3.0 m/sec. squared. So is there any force occurring here? I don't think so because there's no change in the velocities which means there is no acceleration. Am I right?

 

[Hootenanny]

Thanks for the help with the first one. It make a lot more sense now. I actually wrote the wrong units down for the second problem. The elevator is ascending and desending at 3.0 m/s not 3.0 m/sec. squared. So is there any force occurring here? I don't think so because there's no change in the velocities which means there is no acceleration. Am I right?

Spot on, so does the person's weight change?

~H

 

[miss_taken19]

No, I don't think so.Their weight in Newtons would still be 588N (60kg * 9.8m/s. squared) since no other force is acting on their bodies except for the force due to gravity.

 

[Hootenanny]

No, I don't think so.Their weight in Newtons would still be 588N (60kg * 9.8m/s. squared) since no other force is acting on their bodies except for the force due to gravity.

Spot on

 

[miss_taken19]

Yes! Thanks for you help :)

 

[Hootenanny]

Yes! Thanks for you help :)

My pleasure.