I Question about the absorption of heat based on color

  • Thread starter Thread starter timeuser84
  • Start date Start date
Click For Summary
Clothing color affects heat absorption, with black fabrics absorbing more visible light and potentially more heat compared to lighter colors. The absorption of ultraviolet (UV) and infrared (IR) light also plays a significant role, as these wavelengths contribute to heating the fabric. While black clothing may radiate IR better, the thickness of the material can insulate the wearer from heat. In direct sunlight, black clothes can reach higher temperatures, but factors like convection and conduction also influence heat transfer. Ultimately, the choice of clothing color and material thickness can impact comfort and temperature regulation in different conditions.
timeuser84
Messages
59
Reaction score
6
Hello there all, long time. I am not sure where to ask this question so If I am in the wrong area of forum, I ask that the moderator or administrator move this thread to the correct one please.

Is it true that any clothes you wear depending on the color will absorb heat because its black? For example if you wear black socks, will the black socks absorb heat more because its black or a dark color?
 
Physics news on Phys.org
Direct sunlight will tend to warm up dark clothes more than light colored clothes.
 
timeuser84 said:
Is it true that any clothes you wear depending on the color will absorb heat because its black? For example if you wear black socks, will the black socks absorb heat more because its black or a dark color?
Three different parts of the spectrum need to be considered.
1. Ultraviolet, UV.
2. Visible light colour.
3. Infrared, heat, IR.

The colour of clothing you see, is the colour of the visible light that is reflected from the clothing. Visible light that is not reflected becomes heat in the cloth. Some of that is radiated, while some will warm the wearer.

The reflectivity of the cloth to IR and UV cannot be seen by our eyes, but any IR or UV absorbed, will also heat the cloth.

Black clothing will absorb visible light better, but black may also radiate IR better. Material thickness will act as an insulator between your body and the environment. At night, you may want to stay warm.
 
timeuser84 said:
Hello there all, long time. I am not sure where to ask this question so If I am in the wrong area of forum, I ask that the moderator or administrator move this thread to the correct one please.

Is it true that any clothes you wear depending on the color will absorb heat because its black? For example if you wear black socks, will the black socks absorb heat more because its black or a dark color?
Absorptivity at any frequency will be the same as emissivity at the same frequency. That 'could' imply that the colour would make no difference but the solar spectrum is wider than the visible spectrum and what goes on beneath the surface is as important as just on the surface.
Baluncore said:
Three different parts of the spectrum need to be considered.
This could be very relevant and we would have no clue by just looking at the fabric colour. In a simple model, the white and black cloth would reach the same equilibrium temperature and feel the same to the wearer. Left in a vacuum under sunlight this would happen. However, heat energy can go both ways from the fabric so the above 'ideal' description won't apply and the actual heat energy available to warm up the skin under a shite shirt will be less so the equilibrium temperature of the body will be lower (we have cooling mechanisms to help that).

Black socks are largely out of the direct sunlight and they get IR radiated from inside your clothes and also heat transfer by convection and conduction (ditto, your underclothes) so, in very hot conditions, you may be better off with insulating underclothes - unless you are active when you actually need to lose heat. Loose clothing of any colour will allow sweat to do its work. . . . . and so it goes on.
 
Last edited:
This was more than enough knowledge, thank you for the quick responses.
 
  • Like
Likes sophiecentaur and Lnewqban
I'm setting up an analog power supply. I have the transformer bridge and filter capacitors so far. The transformer puts out 30 volts. I am currently using two parallel power transistors and a variable resistor to set the output. It also has a meter to monitor voltage. The question is this. How do I set up a single transistor to remove whats left of the ripple after the filter capacitors. It has to vary along with the control transistors to be constant in its ripple removing. The bases of the...

Similar threads

  • · Replies 98 ·
4
Replies
98
Views
10K
  • · Replies 19 ·
Replies
19
Views
17K
  • · Replies 18 ·
Replies
18
Views
3K
  • · Replies 7 ·
Replies
7
Views
1K
  • · Replies 6 ·
Replies
6
Views
4K
  • · Replies 8 ·
Replies
8
Views
2K
Replies
5
Views
3K
  • · Replies 14 ·
Replies
14
Views
6K