Solve Delta-to-Y Circuit: Find Current & Voltage Across R5

  • Thread starter Thread starter FilthyOtis
  • Start date Start date
Click For Summary
SUMMARY

The discussion focuses on solving a delta-to-Y circuit transformation to find the current through resistor R5 and the voltage across it. The user, Otis, initially calculated equivalent resistances using the delta-to-Y transformation, resulting in a total resistance of 10.32 ohms and a total current of 1.46 A. However, Otis struggled with determining how the current splits after the transformation. Eugene suggested using Kirchhoff's Current Law to set up equations for the unknown voltages at the nodes, which simplifies the analysis and leads to a solution.

PREREQUISITES
  • Understanding of delta-to-Y circuit transformations
  • Familiarity with Kirchhoff's Current Law
  • Basic circuit analysis techniques
  • Ability to solve simultaneous equations
NEXT STEPS
  • Study delta-to-Y transformations in electrical circuits
  • Learn to apply Kirchhoff's Current Law in circuit analysis
  • Practice solving simultaneous equations in electrical contexts
  • Explore advanced circuit analysis techniques using software tools like LTspice
USEFUL FOR

Electrical engineering students, circuit designers, and anyone involved in analyzing and solving complex resistor networks.

FilthyOtis
Messages
15
Reaction score
0
I'm really having troubles figuring this stuff out. Here's a question and what I've done..

a) Calculate current through R5

b) Determine Voltage across R5

I haven't gotten a) yet so haven't even tried b). I made a crude drawing of the original circuit in mspaint.


So... I did a delta-to-y on resisters 1, 2 and 5. Ra = R5, Rb = R2, Rc = R1

running the formulas

R1 = [(18)(12)] / [18 + 12 + 24] = 4 ohms

R2 = [(24)(12)] / 54 = 5.33 ohms

R3 = [(24)(18)] / 54 = 8 ohms


I redrew the picture with the 4ohms at the top splitting into the 5.33 on the left, 8 on the right and continuing down into the other 2 original resistors.

at this point I combined them all into one resistor by going
|| = parallel

4 ohms + [(5.33 ohms + 6 ohms) || (8 ohms + 6 ohms)] = 10.32 ohms


total current(I) = 15 V / 10.32 ohms = 1.46 A

and this is where my problem occurs... I don't know how to work backwards through this delta-to-Y transformation and properly find out how the current is splitting up. Can anyone help make sense of this? Thank you!

- Otis
 

Attachments

  • Circuit.GIF
    Circuit.GIF
    1.3 KB · Views: 572
Physics news on Phys.org
Hi, the circuit drawn is known as brigde circuit. I'm not sure whether your working is wrong or correct. But I try to solve this question by the method below. It will be simpler. The V5 is 1.25v with I= 52.08mA.

First, i knew that V5= R3(15)/(R3+R1)-R4(15)/(18+6)
= 5-3.75
= 1.25v

Here a note attached here, and I hope it is useful for you.
Please correct me if I'm wrong.
 

Attachments

I think the standard way to solve this problem is to use the Kirkhoff current law, i.e., the sum of all currents flowing in and out of the node is zero. Denote x and y the unknown voltages on the left and right node, respectively. Assume that currents flow down trough resistors R1, R2, R3, and R4, and that the current flows from left to right through resistor R5. (It doesn't matter if this guess is wrong: your calculated currents will be negative then.) Then zero current condition in the node x leads to the following equation

[tex]\frac{15-x}{12} -\frac{x}{6} - \frac{x-y}{24} = 0[/tex]

The similar condition for the node y yields

[tex]\frac{15-y}{18} -\frac{y}{6} + \frac{x-y}{24} = 0[/tex]

Now you have 2 equations with two unknowns. The rest is just math.

Eugene.
 

Similar threads

Replies
5
Views
4K
  • · Replies 3 ·
Replies
3
Views
2K
  • · Replies 15 ·
Replies
15
Views
3K
  • · Replies 7 ·
Replies
7
Views
4K
Replies
1
Views
2K
  • · Replies 8 ·
Replies
8
Views
2K
  • · Replies 9 ·
Replies
9
Views
8K
  • · Replies 22 ·
Replies
22
Views
3K
  • · Replies 34 ·
2
Replies
34
Views
6K
  • · Replies 7 ·
Replies
7
Views
4K