Register to reply 
Hydraulics  System curve VS pump curve 
Share this thread: 
#1
Feb2612, 03:36 AM

#2
Feb2612, 03:51 AM

HW Helper
P: 6,189

Isn't it the other way around?
The more flow there is, the harder it is for the pump to generate the required pressure. 


#3
Feb2612, 03:57 AM

PF Gold
P: 2,551

Ah...because there is too much pressure in the system, the pump is overloaded and its effect become less noticeable, right? Hmm... makes sense. So there has to be a relation between the pump and flow, and it's much easier to pick the correct pump than change the entire system to adjust itself to a pump. Brilliant. Thanks ILS!



#4
Feb2612, 04:04 AM

HW Helper
P: 6,189

Hydraulics  System curve VS pump curve
Yep. A pump can generate a certain amount of pressure and when the flow rate increases, the maximum pressure it can generate, drops.
So the pump can not pump beyond a certain flow rate. 


#6
Feb2612, 04:08 AM

P: 409

I haven't had academic studies in such topics but as a result working with pumps and compressors for years, I have some practical understanding of such matters.
The main difference between the pumps and the rest of the system is that the pump gives energy to the fluid while the rest of the system only receive energy .In a pump the fluid flows from the lower pressure to the higher pressure which may be also surprising to you. For a given power of the pomp, of course the higher pressure can be achieved for a lower flow ( the power is proportional to the product of the flow and the pressure difference of the pump ends). likewise, if we get a large flow from the pump, e.g by opening the discharge valve wider, the power of the pump is spent on a larger amount of the fluid, the fluid velocity and consequently the pressure would be less. 


#7
Feb2612, 05:49 AM

P: 1




Register to reply 
Related Discussions  
System head curve for tree piping system  Mechanical Engineering  0  
Banked Frictionless Curve, and Flat Curve with Friction  Introductory Physics Homework  1  
How to convert force displacement curve to stress strain curve  Engineering, Comp Sci, & Technology Homework  1  
Can a curve with singular point be a regular curve?  Calculus & Beyond Homework  3  
Differential Geometry: Showing a curve is a sphere curve  Calculus & Beyond Homework  0 