Duration of Radioactive Contamination

  • Thread starter SilverStud
  • Start date
  • Tags
    Radioactive
In summary, radiation comes in different forms with different half-lives, and decays over time. After 10 half-lives, 99.9% of the radiation is gone. A radiation leak would create more long-lived radiation.
  • #1
SilverStud
2
0
My question has a few sub-questions.

How long does an area stay contaminated, say after a bomb? A reactor leak?

Would different radioactive materials leave an area contaminated longer than others?

What would be the most scientifically plausible for an author to explain the 1000-year contamination of an area?

Thanks in advance!
 
Physics news on Phys.org
  • #2
Radioactivity comes from different isotopes.
Each isotope has its own half-life and total amount. After one half-life, half of the isotope is decayed. After 2, half of the remaining amount is decayed (so 25% is left), and so on. After 10 times the half-life, 99.9% are decayed. The shorter the half-life, the quicker it will decay - but this leads to a higher initial intensity. There is no fixed time after which everything decayed, the activity just goes down forever.

If you plot activity as function of time, you get something like this.
In addition, you have to take into account how the material gets distributed in the environment.

Now, some practical examples: At Hiroshima and Nagasaki, rebuilding began quickly (~months) after the war. There was significant fallout, but most of the material was short-living, or spread in the environment quickly (the bombs exploded in the air). Today, radiation level (above the usual background) is negligible.
Chernobyl, on the other hand, still has significant radioactivity in the area around it, mainly from Cesium IIRC. This will slowly decrease in the next decades to centuries. A significant release of Cesium (+other stuff) in a reactor leak might be a good scenario.
 
  • #3
SilverStud said:
My question has a few sub-questions.

How long does an area stay contaminated, say after a bomb? A reactor leak?

Would different radioactive materials leave an area contaminated longer than others?

What would be the most scientifically plausible for an author to explain the 1000-year contamination of an area?

Thanks in advance!
There are nuclear and chemical aspects to the questions. The nuclear aspect involves both the fission products and the activated materials. The fission products originate with the fission process, and have a characteristic isotopic (radionuclide) vector. The activation products depend on the materials of the ground and structures that absorb neutrons and become radioactive. Nuclear reactors have a different isotopic vector than detonated nuclear weapons.

In either case, there are short-lived radionuclides that decay in seconds, minutes or hours, somewhat moderate-lived radionuclides that decay in days, weeks or months, and long-lived isotopes that decay over years, decades, centuries or millenia.

In 10 half-lives, the activity decreases by 210 ~ a factor of 1000, in 20 half-lives, the activity decreases by a factor ~ 1,000,000, and in 30 half-lives, the activity decays by a factor of 1 billion. So short lived radionuclides can disappear in minutes or days or up to a year or so, whereas moderate-lived take several years or decades, and the longer-lived isotopes can be present for centuries. The longest-lived are persistent.

The other side of that is that the longer the half-life, the lower the activity for a given quantity, that is the lower the specific activity (or activity per unit mass).

The other aspect is the chemical behavior. Cs, for example behaves like Na or K, so it can be taken up by plants, animals and humans. Similarly, I is taken up by plants, animals and humans, and the concern is radio-iodine that is absorbe by the thyroid gland of animals and humans. Radioisotopes of Sr and Ba are a concern for bone uptake, since they behave chemically like Ca. Some of the transurancis, e.g., Pu are also 'bone-seekers'. Various other radionuclides of the transitional metals are a concern because they may be absorbed into the body and used in essential vitamins.

The other side of the chemical behavior is the transport in the environment whereby the radionuclides dissolve and/or form compounds that act to dissipate the radiation.

After the nuclear weapons testing and accidents like Chernobyl and Fukushima, trace levels of radionuclides are found in various parts of the world, but at relatively low levels, although, the levels are higher in the area around the accident site.
 
  • #4
Your question implies that you think contamination is a binary choice. Either something is or is not contaminated. That's not the way things work.

In reality, there is a continuum. The longer the elapsed time, the less the emitted radioactivity.

In terms of health risks due to radiation, safety too is a continuum, not a binary choice. To say that a site is unsafe on day 365,000 but safe on day 365,001 would be arbitrary, not scientific.
 
  • #5
Wow, that was some fantastic information! And thanks for the idea about cesium.
I just now figured out my real question. It is this: can I have a place contaminated for a thousand years, or would smart people like you guys read it and be like "Bull chips!"? Should I find a different excuse for an area to be off limits?
 
Last edited by a moderator:
  • #6
If the area has a contamination which is significant for 1000 years, the radioactivity will go down very slowly after some centuries - there will be no year or even decade where someone can (reasonably) decide "it was too dangerous before, but now it is safe".
This does not take engineering into account - you can clean an area manually, reducing the radioactivity a lot during that cleaning campaign. So if you want some specific end date, let humans remove/clean/whatever the upper layer of the ground.

Should I find a different excuse for an area to be off limits?
Flooded?
 

1. How long does radioactive contamination last?

The duration of radioactive contamination can vary greatly depending on the type of radioactive material involved. Some radioactive substances, such as strontium-90, can persist for hundreds of years, while others, like iodine-131, may only last for a few weeks. It is important to note that even after the initial radioactive material has decayed, the area may still be contaminated due to byproducts of the decay process.

2. Can radioactive contamination be cleaned up?

Yes, radioactive contamination can be cleaned up, but it is a complex and expensive process. The most effective method is to remove the contaminated soil or materials and isolate them in a secure location. Other methods include using chemical and biological treatments to break down the radioactive material, or using physical barriers to prevent further spread of contamination.

3. How far can radioactive contamination spread?

The distance that radioactive contamination can spread depends on a variety of factors, such as the type and amount of radioactive material, weather conditions, and terrain. In general, radioactive material can travel several miles through the air and can contaminate groundwater and surface water in the immediate area.

4. What are the health risks associated with radioactive contamination?

The health risks associated with radioactive contamination depend on the type and amount of radioactive material, as well as the length of exposure. Exposure to high levels of radiation can cause immediate health effects such as radiation sickness, while long-term exposure can lead to an increased risk of developing certain types of cancer. It is important to follow safety protocols and avoid areas with known radioactive contamination.

5. How can one protect themselves from radioactive contamination?

The best way to protect oneself from radioactive contamination is to follow safety protocols and avoid exposure. This may include staying indoors during a radiation event, wearing protective gear when working in contaminated areas, and following proper decontamination procedures. It is also important to stay informed about potential sources of contamination and to evacuate if necessary.

Similar threads

  • High Energy, Nuclear, Particle Physics
Replies
6
Views
1K
  • Nuclear Engineering
Replies
4
Views
1K
Replies
26
Views
836
  • High Energy, Nuclear, Particle Physics
Replies
3
Views
3K
  • Nuclear Engineering
Replies
23
Views
4K
Replies
1
Views
923
  • Sci-Fi Writing and World Building
Replies
22
Views
2K
  • High Energy, Nuclear, Particle Physics
Replies
1
Views
635
  • High Energy, Nuclear, Particle Physics
Replies
10
Views
2K
  • Nuclear Engineering
Replies
3
Views
2K
Back
Top